- Joined
- Nov 19, 2010
- Messages
- 1,178
Hello and good day!
Here I have whats left from the horn I cut this week. I had hoped to have more Bu some of you guys (you know who ya are) snagged most of the larger scales. and folder lots. Thanks!!
Heres what I have left to offer you guys.
These are cured 4 years. and ready to rock n roll!
Prefer PayPal and will ship world wide. Actual shipping cost to be added to total.
I have a couple horn tips. These are approx minimum of 12” long, measured on the outside curve. Most are much longer, but also have a hollow area on the wide side. Yet once that area is removed. You should have a minimum of 12 solid beautiful material. Asking 100.00 each.
Last I have a Mixed lot of slices ranging from 1/8 to 3/8 thick 3 of the pieces are .300” or over and should yield a 3 X 1 3/8 scales. of the rest there are 2 that are 1/4” thick Should be able to get a set of scales minimum or 1 1/8 X 3.. Last piece that is approx 1/8” and could give a 1 1/4 X 4.5” Asking SOLD Thanks BF!!
Last but not least is a larger set that is .325” thick. These should give ya scales at 4.5” X 1 1/2 X .325 SOLD.. Thanks BF
Here I have whats left from the horn I cut this week. I had hoped to have more Bu some of you guys (you know who ya are) snagged most of the larger scales. and folder lots. Thanks!!

These are cured 4 years. and ready to rock n roll!
Prefer PayPal and will ship world wide. Actual shipping cost to be added to total.
I have a couple horn tips. These are approx minimum of 12” long, measured on the outside curve. Most are much longer, but also have a hollow area on the wide side. Yet once that area is removed. You should have a minimum of 12 solid beautiful material. Asking 100.00 each.



Last I have a Mixed lot of slices ranging from 1/8 to 3/8 thick 3 of the pieces are .300” or over and should yield a 3 X 1 3/8 scales. of the rest there are 2 that are 1/4” thick Should be able to get a set of scales minimum or 1 1/8 X 3.. Last piece that is approx 1/8” and could give a 1 1/4 X 4.5” Asking SOLD Thanks BF!!

Last but not least is a larger set that is .325” thick. These should give ya scales at 4.5” X 1 1/2 X .325 SOLD.. Thanks BF

Last edited: