joeldworkin307
Gold Member
- Joined
- Oct 2, 2012
- Messages
- 1,506
Photos in this link: https://goo.gl/photos/W1CGRSbUy2kzxgdC7
Can send more if needed, and I know I need to update what's there.
As far as trades, I'm looking for customs or nice fixed blades between the size of an esee izula and candiru that I can pocket carry, either full flat or hollow ground. Also interested in rare Spyderco's always.
Send offers to joeldworkin307 at gmail dot com. Post here, then follow with email or PM. Do NOT post "I'll take it" unless you intend to take it. Do not contact me unless you are serious about buying/trading. Include your real name and user name in your first email so I know with whom I'm talking.
SPYDERCO
Tuff- CPM-3V, custom Steve Ketchen canvas micarta scale, scoopyloops bead, srt titanium deep carry clip, with box
Citadel 92mm- S30V, plain edge, black dlc, light use with box
Goddard Jr. White- ATS-55, white micarta, slight wear, blade unused with box
Sage 4- S30V, titanium and wood scales, like new, no box
Sage 4- S30V, titanium and wood scales, used, no box
Native Exclusive- CTS-XHP, brown scales, used with box
Mini Dyad- ATS55, micarta scales, carried but blades unused
Worker- Gin-1, serrated, alumite scales, scratches on blade but scales are pristine
Jot Singh Khalsa- Gin-1, micarta, user, clip has been replaced with benchmade clip, off center, solid early lockup
Walker Experimental CX06- AUS-8, black alumite scales, plain edge, used
Walker Experimental CX06- AUS-8, black alumite scales, combo edge, used
Military- 440V, spyderedge, black G10 scales, used
Military- 440V, second generation military on blade steel on ricasso, combo edge, black G10 scales, lightly used
Kiwi Stag- 8cr13mov, stag handles, unused, no box
G. Sakai AR301- ATS-34, single edge liner lock, used
Hunter- Gin-1, plain edge, used
Hunter- Gin-1, serrated, heavily used, no pocket clip
Executive- Gin-1, plain edge, heavily used, lock failure (acts like a slip joint)
ALSO A FEW NON-SPYDERCO:
Mike Snody Boss- CPM154, hollow chisel ground, with certificate and sheath, light use
Benchmade Emerson 970ST- titanium blade, combo edge, used
Emerson Journeyman- 154CM, black micarta, used
Al Mar Eagle Ultralight- AUS-8, Micarta scales, used
Al Mar Eagle-T- cocobolo scales, clip point with swedge, camo sheath, used
Cold Steel Ti Lite- AUS-8A, 4 in model, used and sharpened
Cold Steel UWK- Carbon V steel, made in USA, unused but no box
Real Steel Observer- 440C, light use
John Greco Custom Fighter- 5160 with leather sheath marked "Greco" on the top left hand screw. It has been used lightly, because come on, I had to cut something with this beast. 1/4 inch stock of 5160, guard and lanyard loop were both ground down by John at the request of the first owner. Edge is perfect with no chips
Can send more if needed, and I know I need to update what's there.
As far as trades, I'm looking for customs or nice fixed blades between the size of an esee izula and candiru that I can pocket carry, either full flat or hollow ground. Also interested in rare Spyderco's always.
Send offers to joeldworkin307 at gmail dot com. Post here, then follow with email or PM. Do NOT post "I'll take it" unless you intend to take it. Do not contact me unless you are serious about buying/trading. Include your real name and user name in your first email so I know with whom I'm talking.
SPYDERCO
Tuff- CPM-3V, custom Steve Ketchen canvas micarta scale, scoopyloops bead, srt titanium deep carry clip, with box
Citadel 92mm- S30V, plain edge, black dlc, light use with box
Goddard Jr. White- ATS-55, white micarta, slight wear, blade unused with box
Sage 4- S30V, titanium and wood scales, like new, no box
Sage 4- S30V, titanium and wood scales, used, no box
Native Exclusive- CTS-XHP, brown scales, used with box
Mini Dyad- ATS55, micarta scales, carried but blades unused
Worker- Gin-1, serrated, alumite scales, scratches on blade but scales are pristine
Jot Singh Khalsa- Gin-1, micarta, user, clip has been replaced with benchmade clip, off center, solid early lockup
Walker Experimental CX06- AUS-8, black alumite scales, plain edge, used
Walker Experimental CX06- AUS-8, black alumite scales, combo edge, used
Military- 440V, spyderedge, black G10 scales, used
Military- 440V, second generation military on blade steel on ricasso, combo edge, black G10 scales, lightly used
Kiwi Stag- 8cr13mov, stag handles, unused, no box
G. Sakai AR301- ATS-34, single edge liner lock, used
Hunter- Gin-1, plain edge, used
Hunter- Gin-1, serrated, heavily used, no pocket clip
Executive- Gin-1, plain edge, heavily used, lock failure (acts like a slip joint)
ALSO A FEW NON-SPYDERCO:
Mike Snody Boss- CPM154, hollow chisel ground, with certificate and sheath, light use
Benchmade Emerson 970ST- titanium blade, combo edge, used
Emerson Journeyman- 154CM, black micarta, used
Al Mar Eagle Ultralight- AUS-8, Micarta scales, used
Al Mar Eagle-T- cocobolo scales, clip point with swedge, camo sheath, used
Cold Steel Ti Lite- AUS-8A, 4 in model, used and sharpened
Cold Steel UWK- Carbon V steel, made in USA, unused but no box
Real Steel Observer- 440C, light use
John Greco Custom Fighter- 5160 with leather sheath marked "Greco" on the top left hand screw. It has been used lightly, because come on, I had to cut something with this beast. 1/4 inch stock of 5160, guard and lanyard loop were both ground down by John at the request of the first owner. Edge is perfect with no chips
Last edited:
