My version of a Kershaw "Frankenleek"

Morrow

Morrow

Don't make this weird
Joined
Apr 11, 2007
Messages
27,773
What do you get when you cross a Kershaw 1660G10 Leek and a 1660TSW Random Leek?

You get this.....

DSCF0287.jpg


DSCF0288.jpg


DSCF0289.jpg


DSCF0290.jpg


DSCF0291.jpg
 
SecSpyral said:
This would be my ultimate leek. May I ask, how did you do it?
Click to expand...

Well...you would need a 1660G10 and a 1600TSW. You will also need screws from a Shallot. The regular 1660G10 screws are too long because this one is thinner due to not having G10 on the opposite side. The screws for the 1660TSW are too short. The Shallot screws are just right. If you asked Kershaw I'm sure they would send you some.

I just pulled the entire side of the 1660G10 (the side with the torsion bar) and screwed (shallot screws) it right on the frame of the 1660TSW.
 
morrowj_98 said:
Well...you would need a 1660G10 and a 1600TSW. You will also need screws from a Shallot. The regular 1660G10 screws are too long because this one is thinner due to not having G10 on the opposite side. The screws for the 1660TSW are too short. The Shallot screws are just right. If you asked Kershaw I'm sure they would send you some.

I just pulled the entire side of the 1660G10 (the side with the torsion bar) and screwed (shallot screws) it right on the frame of the 1660TSW.
Click to expand...

Thank you :)
 
Lol, that's just crazy. Sounds like a waste of two good knives, but the end result creates a m-u-u-n-s-t-e-r!!!! ITS ALIVEE!!
 
You must log in or register to reply here.
Back
Top