My Very First Custom Knife!!!!!!!!

Joined
Jan 20, 2012
Messages
2,278
As the title says. I received my very first custom knife today. Now I see what all the fuss is about. lol. I love my Beckers but this is just perfect. It has the thinner handles that I would compare to a tweener but a better feel in my opinion. The balance is just right. I was just itching to use it, but its late and I am on baby duty. So I look around the living room for its first victim..........Should I throw it at the dog? Nah the wife will kill me....Should I baton, chop and process down the end tables I hate so much? Nah the wife will kill me for that too. So what can I do that wont get me killed before I actually get to give this knife a good workout.......I settled for feathersticking a piece of fatwood. Boring I know, but you do the best with what you have, right? I will say one thing, though. I am not as awful at feathersticking as I thought.......I'm just awful at sharpening.:D

Heres a few shots of her. Sorry for the bad lighting--Im also awful at photography--
20131114_231728_zpsef43897e.jpg


20131114_231914_zpsa0529d69.jpg


20131114_233017_zpsf2543c87.jpg
 
Glad to see it made it! I'm looking forward your impressions on the Yuma. I'd just baton the cat, wife be damned.
 
Thats one thing my wife and I agree on.....NO CATS!!!!--My initial impression is WOW!. After the brief feathersticking and the constant fondling for the last few hours, this is exactly what I have been looking for. Looks aside, it's design is just what it claims to be.....a workhorse. I already said to Todd that it almost makes me not want to use it......almost. Its just the right amount of robustness while still retaining it's slicyness--I will give you more of an impression after I spend some time with her.
 
Glad you got it and glad you like it. now go out and beat the hell out of it! :thumbup: I'm honored that you made a TMHunt knife your first custom!
 
Dude, your screwed. Not only did you just discover handmade knives, but you jumped in with an awesome maker. Start saving now for the next one!

That combo handle is sick, by the way. Very nice choice!
 
Last edited:
My father needed my help to tarp off a pile of firewood today so I headed over to his house. While waiting for him I thought it would be a good time to give my Yuma a little workout.

First I cleaned up one end of a piece of hardwood for a beater stick (baton)
20131116_090158_zps620586ee.jpg


Then I used it to baton through a really hard piece of maple. The Yuma didnt even struggle at all.
20131116_085745_zps0094183c.jpg


I made a few feathersticks out of a couple of the pieces. These arent very good, but I have never been good at them. Now I realize its all in the knife and sharpness.
20131116_090217_zps1e19ecf3.jpg


I took one more shot before we got to work.
20131116_085444_zps02585cd6.jpg


There was actually 2 workhorses involved. For this job the smaller and sharper of the two came in more handy. I used it to cut rope and notch stakes. I would have snapped a few shots but my dad probably would have slapped me upside the head if I stopped working to take a picture of my knife.lol
20131116_092703_zps6d0f1233.jpg


Another shot of the workhorses. Thats my dad's neighbors house just behind the tractor (He doesnt live there and the place is falling down. I am trying to get him to sell it but he wont---it needs a ton of work, though) My dad's house is way in the background behind the "Stubborn Oak" (she doesnt give up her leaves til around February). The creek that runs along side of the road in the left side of the photo use to be full of trees on both sides. You couldnt see my dads house at all. The County thought it would be best to cut down every single tree along the creek so they could make it deeper and wider. Now they are having cave in problems (morons). The worst part about it is that they drainage/flow issue isnt even on his property . He keeps his section clean. The problem is right after my dads property where it goes under a main 2 lane highway. The tunnel underneath isnt large enough for adequate flow. But they didnt fix that part at all (again, morons). So now they have a wider and deeper ditch funneling into this tunnel. (And they are taking the total cost of the project, dividing it by how many landowners they screwed over by cutting down their trees and then divided that up and tacked it on to their taxes for the next ten years) The only good thing that came out of it is my dad now has about 8 years worth of firewood.
20131116_092833_zps7824898b.jpg


The last thing I wanted to test out was how well it functioned as a throwing knife. I have to say I was pleasantly surprised at how well it "thunks" into the wood.
20131116_092907_zps4c34ef2d.jpg


Just kidding, Todd. You can stop holding your breath now.( and silently chewing me out) It was a glamour shot.:D
 
Last edited:
Its just the right amount of robustness while still retaining it's slicyness

Now there's a quote to hang on the wall. Congrats. Can't quit fiddling with it, can ya? Holy Hell..I sucked in air when I got to the throwing knife part.. lol. Good one.
 
Thanks for the vid. I have developed a real want for the Yuma. One thing that I wondered about was the scale of the knife as compared to other things/blades I am familiar with. I read the measurements and thought the Yuma was close to the BK16 in size, so I have been looking at my 16 a lot and comparing it to the pics of the Yuma. So, in that respect, its nice to see the Yuma in hand.

Thanks again
 
I'm telling you, GO FOR IT!!! You wont regret it, I promise you. Before my Yuma, my 16 was by far my favorite blade. The Yuma feels very similar in the hand. The contour is much better and its just a little bit heavier. It doesnt feel heavier in a bad way, it feels much more stout and capable. I have never owned any other customs but I have handled quite a few and I have to say they dont compare. Heres a few photos for comparison.
20131120_002852_zps49e3fa1a.jpg

20131120_003105_zpsa07b3e03.jpg


The only downside is.........wanting more. I already have a huge itch for a hornet.
 
That photo tells me what I thought before. The handle would be way too small for me. My pinky would go right on top the "beak".
 
That photo tells me what I thought before. The handle would be way too small for me. My pinky would go right on top the "beak".

This knife was my personal knife for a long time. I made this one for me, and as I have told you all before, I have freakishly small hands for my size. I never made this knife with the intent to get rid of it, but Mr. OFM4 took such a liking to it I moved it on down the road. I can adjust the handle size by removing part of the "beak" and assure you, I can make one that would fit your Yeti sized claws! :D
 
This knife was my personal knife for a long time. I made this one for me, and as I have told you all before, I have freakishly small hands for my size. I never made this knife with the intent to get rid of it, but Mr. OFM4 took such a liking to it I moved it on down the road. I can adjust the handle size by removing part of the "beak" and assure you, I can make one that would fit your Yeti sized claws! :D

Nah, it's okay, the Hornet fits just fine and dandy thank you. :D
 
Thanks OFM4 for the comparison pics.

A bit off track here: I showed my wife the pic of the Yuma on the website and surprisingly she didn't ask, "So, tell me why you need this knife when you have all those Beckers?" (As is mostly the case when i want a new knife) she just said, "That's nice." I think after 18 years of marriage she's starting to figure out that for me "need and want" are the same thing.
 
That photo tells me what I thought before. The handle would be way too small for me. My pinky would go right on top the "beak".

Dubz.. pm me your address. I'll send you my Yuma to try out. I'm telling ya, I too have the curse of the large appendages, and the stock Yuma is good to go!
 
Diesel - no it's not.
I've handled several Yumas & trust me, Dubs will not find the handle comfortable.
Ask Todd about what they look like in my paws -- and Dubs may have bigger hands than I do.
 
Back
Top