- Joined
- Feb 21, 2017
- Messages
- 797
Hello guys I would like to offer you two knives that I finished between the holidays. A long and thin full tang with nice stabilized maple burl and very light and sharp elmax puukko for neck carry.
#1 A long and thin full tang with nice stabilized maple burl and brass bolsters. With this geometry and steel, It should be pretty good for fine cutting and slicing. I made double stitching on the sheath.
Steel – RWL 34 60-61 HRC.
OAL - 239 mm (~9.4").
Blade - 120x20x3mm (~4.7x0.8x0.12 ") flat grind with secondary bevel.
Blade finish - 800p.
Handle – Stabilized american maple burl , brass bolster, g10 liners and carbon pins .
Leather sheath .
Weight with/without sheath - 115/170 grams.
More pics
SOLD Including PP fees and priority shipping with tracking
Paypal only please.
PP address: tosheto8205@gmail.com ( this e-mail can also be used to contact me )
The knife goes to the first "I'll take it."
------------------------------------------------------------------------------------
#2 Very light puukko with birch bark handle. It's ment for carrying around the neck. The elmax blade should hold an edge pretty long time and the birch bark makes the handle warm and non-slippery.
Steel – Elmax 59-61 HRC.
OAL - 213 mm (~8.4").
Blade - 93x16.5x3.7mm (~3.7x0.6x0.15 ") rhomboid grind.
Blade finish - p 800.
Handle – birch bark and brass.
Leather sheath with wooden insert .
Weight with/without sheath - 68/99 grams.
http://tosheto8205.snimka.bg/other/necker-puukko-elmax.5163503.39215271
SOLD Including PP fees and priority shipping with tracking
Paypal only please.
PP address: tosheto8205@gmail.com ( this e-mail can also be used to contact me )
The knife goes to the first "I'll take it."
#1 A long and thin full tang with nice stabilized maple burl and brass bolsters. With this geometry and steel, It should be pretty good for fine cutting and slicing. I made double stitching on the sheath.
Steel – RWL 34 60-61 HRC.
OAL - 239 mm (~9.4").
Blade - 120x20x3mm (~4.7x0.8x0.12 ") flat grind with secondary bevel.
Blade finish - 800p.
Handle – Stabilized american maple burl , brass bolster, g10 liners and carbon pins .
Leather sheath .
Weight with/without sheath - 115/170 grams.
More pics
SOLD Including PP fees and priority shipping with tracking
Paypal only please.
PP address: tosheto8205@gmail.com ( this e-mail can also be used to contact me )
The knife goes to the first "I'll take it."
------------------------------------------------------------------------------------
#2 Very light puukko with birch bark handle. It's ment for carrying around the neck. The elmax blade should hold an edge pretty long time and the birch bark makes the handle warm and non-slippery.
Steel – Elmax 59-61 HRC.
OAL - 213 mm (~8.4").
Blade - 93x16.5x3.7mm (~3.7x0.6x0.15 ") rhomboid grind.
Blade finish - p 800.
Handle – birch bark and brass.
Leather sheath with wooden insert .
Weight with/without sheath - 68/99 grams.
http://tosheto8205.snimka.bg/other/necker-puukko-elmax.5163503.39215271
SOLD Including PP fees and priority shipping with tracking
Paypal only please.
PP address: tosheto8205@gmail.com ( this e-mail can also be used to contact me )
The knife goes to the first "I'll take it."
Last edited: