Need Help! Stainless Damascus?

[Tom Krein]

Trying to find a source for stainless damascus. I figured you guys could help me out. Thanks in advance.

Tom

 

[fitzo]

Devin Thomas makes it. Check it out at www.devinthomas.com.

There's also Damasteel, www.ssdamascus.com .

 

[Larrin]

You can also buy the Devin Thomas damascus straight from K&G at http://www.knifeandgun.com/

 

[gator68]

Trying to find a source for stainless damascus. I figured you guys could help me out. Thanks in advance.

Tom

I second Devin Thomas. Never had a problem with his steel. Great guy if you ever meet him in person.

 

[Don Hanson III]

Devin Thomas is a great guy. He has probably made more damascus than anybody. I highly recomend him.

Don Hanson lll

 

[godogs57]

I used some Odin's Eye ATS-34 damascus and it turned out stunning....got it from Texas Knifemaker's Supply....It was the most beautiful damascus knife I had made up till that point...I just remember that it was somewhat on the expensive side for the blank...heat treated just like ATS-34, of course, and my gosh, what a sharp blade on the finished product.

Look it up in their catalog

 

[Stacy E. Apelt - Bladesmith]

Devin Thomas or Mike Norris.Both are real good

 

[Larrin]

I second Devin Thomas. Never had a problem with his steel. Great guy if you ever meet him in person.

Or if you're really lucky, you could see me with him! OK, so maybe not so much lucky....

 

[Kit Carson]

Larrin,
Nah, I've met you. Devin is alot larger

I use alot of Devins stuff and never had a problem with any of it. Even that piece of ss ladder that was .270 x 2" x 13".

 

[Tom Krein]

Guys,
Thanks for the help. I have given Devin Thomas a call and am looking forward to using some of his damascus. It looks like he does beautiful work.

Tom

 

[Arthur Washburn]

Larrin when are you going to make a knife?

Arthur D. Washburn
www.adwcustomknives.com
In knifemaking everyone gets cut and everyone gets burned.

 

[Larrin]

As soon as I can get my dad to give me some help. So, I guess the answer would be probably never. I've been working on him. I have a design drawn up, a simple little knife. I'll probably use some scrap steel to practice on and then do a finished blade with the first bar of damascus that I ever forged. If I'm lucky I might get something done by the Vegas Classic show.