Need help with bevels.

[Gaelic Blades]

Started making my first few knives and I'm using a Bubble Jig. My bevels keeping coming out like this. The bevel on one side of the blade is higher than the other. I've been trying to keep the same pressure on both sides and obviously doing the same angle. Could this be my grinder? Any help is greatly appreciated.

http://i1112.photobucket.com/albums/k491/c-tech/IMAG05731_zpstsi9idhc.jpg

http://i1112.photobucket.com/albums/k491/c-tech/IMAG05721_zpsnnkvwjf9.jpg

 

[TravisH]

WELCOME!

You'll probably get better responses in the Knife Makers subforum.

If a moderator doesn't move this beforehand, try reposting in the Shop Talk section -
http://www.bladeforums.com/forums/forumdisplay.php/741-Shop-Talk-BladeSmith-Questions-and-Answers

 

[n7titan]

I put together the two pictures for you for easier comparison

here's the URL for the picture too, http://i197.photobucket.com/albums/aa235/tling6990/fesvefawevf.jpg

 

[Jens Schuetz]

Watched the first 2 jig videos only and thus might miss something.
Here's my 2 cents.
He holds the grinder much longer at the plunge line. No idea why but looking at your blade I now know though still not what mechanism is at work there? Would the belt simply be slower there and thus needs more time?
Also he pulls it straight even when approaching the belly and through the tip which causes a steeper angle in that area compares to the straight part of the edge, just like in your example. I guess there's no other way with keeping the bubble centered the whole time. Some might like it though to keep the tip stronger.