CaptainPicardX
BANNED
- Joined
- Jan 10, 2010
- Messages
- 286
I have TWO stuck together N 48 3" x 1.5"
These cost $99 EACH.. Plus shipping! Im selling both for $160..Saving yourself lots of money.
N48 3 inch wide x 1.5 inch thick
Approx. 650 lbs holding force
14200 Gauss, or 1.42 Tesla
NOT A JOKE!
Second to last pic is the spacer I had made out of diff. stuff in order to store them with the spacer in the middle. That spacer was about 2 inches thick.. look at it now! Bad idea for a spacer!
The last pic is what happens when you let them slam into each other with your finger in the middle!
Two 3 inch magnets stuck together. I do not have the time to take them apart. I will post link to a YT vid showing how to take them apart. Its not that hard if you have a few tools to make a simple contraption out of wood. I believe these have a holding force of 650 Lbs.. THIS IS NOT A TOY.. It will crush your hand like an egg, if you let them snap together.
Played around with them a little. Was planning to do an experiment, economy ran me out of money.. Now moving, aint got no use for them.
These are not Chinaman from Ebay.. Pretty sure these are Made in the US. I have Duct tape on one, electrical tape on the other, in order to save the nickel finish on them. The tape can be taken off BY YOU, once you separate them.
https://youtu.be/ybY_wdQ5MSc
Firm, cash, in Br, you come to me car broke
I have more pics as well
These cost $99 EACH.. Plus shipping! Im selling both for $160..Saving yourself lots of money.
N48 3 inch wide x 1.5 inch thick
Approx. 650 lbs holding force
14200 Gauss, or 1.42 Tesla
NOT A JOKE!
Second to last pic is the spacer I had made out of diff. stuff in order to store them with the spacer in the middle. That spacer was about 2 inches thick.. look at it now! Bad idea for a spacer!
The last pic is what happens when you let them slam into each other with your finger in the middle!
Two 3 inch magnets stuck together. I do not have the time to take them apart. I will post link to a YT vid showing how to take them apart. Its not that hard if you have a few tools to make a simple contraption out of wood. I believe these have a holding force of 650 Lbs.. THIS IS NOT A TOY.. It will crush your hand like an egg, if you let them snap together.
Played around with them a little. Was planning to do an experiment, economy ran me out of money.. Now moving, aint got no use for them.
These are not Chinaman from Ebay.. Pretty sure these are Made in the US. I have Duct tape on one, electrical tape on the other, in order to save the nickel finish on them. The tape can be taken off BY YOU, once you separate them.
https://youtu.be/ybY_wdQ5MSc
Firm, cash, in Br, you come to me car broke
I have more pics as well
Last edited: