- Joined
- Feb 1, 2010
- Messages
- 1,312
Hello,
I finally got more of these blades cut out and am starting to grind and heat treat them. Two are 1095 and are the same $40 dollars and the other is D2 with a more exotic wrap so its $55. Kelley
Black Nessmuk
1/8 inch thick 1095 carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is black paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 3.5 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 7.5 inches
Hard Edge Knives makers mark on spine
Sheath black Kydex drilled for a small Tek Loc.
SOLD Price $40 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
Coyote Nessmuk
1/8 inch thick 1095 carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is coyote brown paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 3.4 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 7.5 inches
Hard Edge Knives makers mark on spine
Sheath coyote brown Kydex drilled for a small Tek Loc.
SOLD Price $40 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
D2 Nessmuk
Steel is 1/8 inch thick D2 tool steel blade
Handle is gutted black paracord Ito wrapped over brown Iguana skin on the knifes full tang with tang which is sealed to prevent rust. The paracord it epoxy set to increase wear and durability.
Blade length 3.1 inches long tip to wrap with ground tiger striped flats and steel bevels.
Overall all knife length is 7.3 inches
Hard Edge Knives makers mark on spine
Sheath black Kydex drilled for a small Tek Loc.
SOLD Price $55 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
I finally got more of these blades cut out and am starting to grind and heat treat them. Two are 1095 and are the same $40 dollars and the other is D2 with a more exotic wrap so its $55. Kelley
Black Nessmuk
1/8 inch thick 1095 carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is black paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 3.5 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 7.5 inches
Hard Edge Knives makers mark on spine
Sheath black Kydex drilled for a small Tek Loc.
SOLD Price $40 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
Coyote Nessmuk
1/8 inch thick 1095 carbon steel differentially heat treated, edge approx 60 Rc and spine much softer
Handle is coyote brown paracord wrapped onto the knifes full tang with tang under wrap sealed to prevent rust.
Blade length 3.4 inches long tip to wrap with dark flats and steel bevels.
Overall all knife length is 7.5 inches
Hard Edge Knives makers mark on spine
Sheath coyote brown Kydex drilled for a small Tek Loc.
SOLD Price $40 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
D2 Nessmuk
Steel is 1/8 inch thick D2 tool steel blade
Handle is gutted black paracord Ito wrapped over brown Iguana skin on the knifes full tang with tang which is sealed to prevent rust. The paracord it epoxy set to increase wear and durability.
Blade length 3.1 inches long tip to wrap with ground tiger striped flats and steel bevels.
Overall all knife length is 7.3 inches
Hard Edge Knives makers mark on spine
Sheath black Kydex drilled for a small Tek Loc.
SOLD Price $55 plus $7 shipping
I prefer paypal (my account is kelley_ward@keysight.com) but take other forms of payment
Last edited:
