We have had a busy night tonight anodizing some new ZT and Hinderer Knives. No upcharge for the ano work! Links for individually pictured knives are above the pic!
You can check out all our Anodized and Customized Knives at:
https://www.usamadeblade.com/Anodized-and-Customized-Knives_c65.htm
1. This is our new Anodizing color Spent Brass. The Hinderer Full Track was a perfect knife to put it on first!
https://www.usamadeblade.com/Full-T...odized-SW-20CV-Full-Track-Spent-Brass-Blk.htm
https://flic.kr/p/2fkGvEU https://www.flickr.com/photos/59094695@N06/
2. ZT0470 with Bronze Tri Steps with Purple to Blue Fade. This turned out just bad ass.
https://www.usamadeblade.com/ZT0470...-Blue-Fade-ZT0470-Tri-Step-Brnz-Purp-Blue.htm
https://flic.kr/p/2fkGrpuhttps://www.flickr.com/photos/59094695@N06/
3. Ghost Bronze Anomascus ZT0301. We have wanted to do one of these since the 301s became available again. It is a really cool finish with the Anomascus pattern being very faint. Plus the bronze goes killer with the OD Scale.
https://www.usamadeblade.com/ZT0301...iger-Stripe-ZT0301-Ghost-Bronze-Anomascus.htm
https://flic.kr/p/2fkGrkw https://www.flickr.com/photos/59094695@N06/
4. Green and Blue Anomascus Full Ti Hinderer Spanto Half Track with Bronze Hardware. The colors fade off on these where the handle screws come in and it makes it just stunning with the Brass Hardware to bring it all together.
https://www.usamadeblade.com/Spanto...us-2-Tone-20CV-1-2Trk-Full-Ti-Grn-Blu-Ano.htm
https://flic.kr/p/2fkGrd7 https://www.flickr.com/photos/59094695@N06/
5. Purple to Green Fade with Bronze Anomascus ZT0393GLCF. This is our original thinner lined Anomascus. The colors fade in and out perfectly and it really pops with the ZT scale in daylight or in glow mode!
https://www.usamadeblade.com/ZT0393...-Anodized-ZT0393GLCF-Purp-Grn-Brz-Anomasc.htm
https://flic.kr/p/2fkGr3Y https://www.flickr.com/photos/59094695@N06/
6. High Res Purple Hinderer Full Track. We had intended to anodize this green. We stopped at High Res Purple just to see what it looked like, and we just stopped. This color purple looks really awesome on the Full Track. It has a slight pink hue to it but hey real men wear pink!
https://www.usamadeblade.com/Full-T...Anodized-SW-20CV-Full-Track-Purple-BlkG10.htm
https://flic.kr/p/2fkGrzjhttps://www.flickr.com/photos/59094695@N06/
I am sorry we do not do outside anodizing work. Only anodizing on the knives we sell. If you have questions about any of our work, request for a pattern on a certain knife, or questions about any of the knives we sell I hope you will contact me via PM or email.
Thank you for looking!
Scott (Whitty) Whittington
scott@usamadeblade.com
You can check out all our Anodized and Customized Knives at:
https://www.usamadeblade.com/Anodized-and-Customized-Knives_c65.htm
1. This is our new Anodizing color Spent Brass. The Hinderer Full Track was a perfect knife to put it on first!
https://www.usamadeblade.com/Full-T...odized-SW-20CV-Full-Track-Spent-Brass-Blk.htm
https://flic.kr/p/2fkGvEU https://www.flickr.com/photos/59094695@N06/2. ZT0470 with Bronze Tri Steps with Purple to Blue Fade. This turned out just bad ass.
https://www.usamadeblade.com/ZT0470...-Blue-Fade-ZT0470-Tri-Step-Brnz-Purp-Blue.htm
https://flic.kr/p/2fkGrpuhttps://www.flickr.com/photos/59094695@N06/3. Ghost Bronze Anomascus ZT0301. We have wanted to do one of these since the 301s became available again. It is a really cool finish with the Anomascus pattern being very faint. Plus the bronze goes killer with the OD Scale.
https://www.usamadeblade.com/ZT0301...iger-Stripe-ZT0301-Ghost-Bronze-Anomascus.htm
https://flic.kr/p/2fkGrkw https://www.flickr.com/photos/59094695@N06/4. Green and Blue Anomascus Full Ti Hinderer Spanto Half Track with Bronze Hardware. The colors fade off on these where the handle screws come in and it makes it just stunning with the Brass Hardware to bring it all together.
https://www.usamadeblade.com/Spanto...us-2-Tone-20CV-1-2Trk-Full-Ti-Grn-Blu-Ano.htm
https://flic.kr/p/2fkGrd7 https://www.flickr.com/photos/59094695@N06/5. Purple to Green Fade with Bronze Anomascus ZT0393GLCF. This is our original thinner lined Anomascus. The colors fade in and out perfectly and it really pops with the ZT scale in daylight or in glow mode!
https://www.usamadeblade.com/ZT0393...-Anodized-ZT0393GLCF-Purp-Grn-Brz-Anomasc.htm
https://flic.kr/p/2fkGr3Y https://www.flickr.com/photos/59094695@N06/6. High Res Purple Hinderer Full Track. We had intended to anodize this green. We stopped at High Res Purple just to see what it looked like, and we just stopped. This color purple looks really awesome on the Full Track. It has a slight pink hue to it but hey real men wear pink!
https://www.usamadeblade.com/Full-T...Anodized-SW-20CV-Full-Track-Purple-BlkG10.htm
https://flic.kr/p/2fkGrzjhttps://www.flickr.com/photos/59094695@N06/I am sorry we do not do outside anodizing work. Only anodizing on the knives we sell. If you have questions about any of our work, request for a pattern on a certain knife, or questions about any of the knives we sell I hope you will contact me via PM or email.
Thank you for looking!
Scott (Whitty) Whittington
scott@usamadeblade.com