All knives are made from A-2 tool steel and are heat treated by Paul Bos to 58-60 RC. All coatings are KG Gun Kote.
All Prices include an A-1 Okuden Sheath, shipping and insurance to a U.S. address.
Foreign customers are welcome, but need to contact me regarding shipping costs and carrier.
Pic #1: The Ammo Daddy Alpha in 3/16" x 1.75" stock and a flat grind. OAL is approx 10" with a 5.75" blade. Price: $350
#1 SOLD
Pic #2: The SST. 3/16" x 1.25" stock, hollow grind, OAL is 9" with 4" blade. Price: $265
Pic #3: The Sharp Thing II. 3/16" x 1.5" stock, flat grind. OAL 9" with 4" blade. Price: $275 #6 in this pic has a 3 3/8" blade and is 8" long. Price: $265
#4,#5,#1,#2,#3 SOLD
I built the next 2 blades to use in the cutting competition at Blade West.
Pic #4: This is the knife I decided to use. It is just under 15" OAL and was ground from 1/4"x 2" stock. The primary bevels, hand lapped on a shop grade surface plate, are within about .002" of flat! I have not retouched the edge since the competition so you will receive this chopper in the condition it finished. It will still shave. Price: $885
Pic #5: The "sister knife" of the Warncliffe in #4. I started calling it "The Mutant" as it has some characteristics of both a Nessmuk, and a Bolo. Nice forward balance for chopping. I didn't use it to compete because the re-curve can cause difficulty with some of the cuts (anything that requires you to cut down to a flat surface to be specific). Price $785
The easiest way to contact me is via e-mail: okuden@earthlink.net
Please identify your knife by picture and number (tag on knife). I'll be happy to answer questions.
I gladly accept Visa, Mastercard and Postal Money Orders. Thank you for looking!
All Prices include an A-1 Okuden Sheath, shipping and insurance to a U.S. address.
Foreign customers are welcome, but need to contact me regarding shipping costs and carrier.
Pic #1: The Ammo Daddy Alpha in 3/16" x 1.75" stock and a flat grind. OAL is approx 10" with a 5.75" blade. Price: $350
#1 SOLD
Pic #2: The SST. 3/16" x 1.25" stock, hollow grind, OAL is 9" with 4" blade. Price: $265
Pic #3: The Sharp Thing II. 3/16" x 1.5" stock, flat grind. OAL 9" with 4" blade. Price: $275 #6 in this pic has a 3 3/8" blade and is 8" long. Price: $265
#4,#5,#1,#2,#3 SOLD
I built the next 2 blades to use in the cutting competition at Blade West.
Pic #4: This is the knife I decided to use. It is just under 15" OAL and was ground from 1/4"x 2" stock. The primary bevels, hand lapped on a shop grade surface plate, are within about .002" of flat! I have not retouched the edge since the competition so you will receive this chopper in the condition it finished. It will still shave. Price: $885
Pic #5: The "sister knife" of the Warncliffe in #4. I started calling it "The Mutant" as it has some characteristics of both a Nessmuk, and a Bolo. Nice forward balance for chopping. I didn't use it to compete because the re-curve can cause difficulty with some of the cuts (anything that requires you to cut down to a flat surface to be specific). Price $785
The easiest way to contact me is via e-mail: okuden@earthlink.net
Please identify your knife by picture and number (tag on knife). I'll be happy to answer questions.
I gladly accept Visa, Mastercard and Postal Money Orders. Thank you for looking!
Attachments
Last edited:
