NEW Knives - Kornalski "Jamall" knives - BohlerK720 & PM M390 and Uddeholm PM Vanadis 4 Extra steels

[KornalskiKnives]

Hi,

You can find me on my website --> www.kornalski.com.pl
There are links to Instagram or Facebook if you use them.

Any questions; orders or want to talk mail me --> adam@kornalski.com

To all costs posted in the thread --> you need to add 5% for PayPal fee.
------------------------------------------------------------------------------------------------------------

STEEL - AISI A8Mod (Bohler Chipper, Uddeholm Viking)

General Uddeholm Viking is a oil-air-vacuum-hardening steel which is characterized by: • good dimensional stability during heat treatment • good machinability and grindability • excellent combination of toughness and wear resistance • normal hardness in the range 52–58 HRC • ideal for surface coating (CVD, PVD) Exaggerated sketch of a typical punch and die in action. The chemical composition of Uddeholm Viking gives a hardness potential of 58 HRC with compressive strength and wear resistance accordingly. The small amount of primary carbides means a high chipping resistance and with 8 % chromium follows a very good hardenability and also a fairly good resistance to corrosion.

Typical
C Si Mn Cr Mo V analysis %
0.5 1.0 0.5 8.0 1.5 0.5

Applications Uddeholm Viking is a versatile, high alloyed tool steel characterized by the right combination of toughness and wear resistance required for heavy duty blanking and forming.
-------------------------------------------------------------------------------------------------------
STEEL - AISI O2 (Bohler K720)

Oil hardening, dimensionally stable tool steel.

Tools (punches) and dies for blanking, punching and similar operations; threading and wood working tools, machine knives for the pulp, paper and metalworking industries; measuring tools and plastic moulding dies.

Chemical composition (average %)
C Si Mn Cr V
0,90 0,25 2,00 0,35 0,10

Obtainable hardness: 62 - 65 HRC
---------------------------------------------------------------------------------------------------
Knife: AgorEDC
Steel: Bohler PM M390 Tool Steel
Thickness of 4,3 mm
Hardness: 60 HRC
Handle: Green Canvas Micarta sandblasted
Attachment: Turn stainless torx screws
Finish blade: Stonewash after fine sandblasting
Size:
Total length: 238 mm
The width of the blade: 32 mm
Blade 110 mm
Weight 228 g.
Sheath: 2 mm black ABS 2 mm with Big TekLok

Asking: 200 $ shipped

-------------------------------------------------------------------------------------------------------
Knife: ODC125
Steel: Vanadis 4 Extra PM Stainless Tool Steel
Thickness of 3,7 mm
Hardness: 62 HRC Secondary hardness
Handle: Brown Canvas Micarta sandblasted
Attachment: Turn black steel M4 imbus screws
Finish blade: Stonewash
Size:
Total length: 255 mm
The width of the blade: 35 mm
Blade 125 mm
Weight 236 g.
Sheath: 2 mm black ABS with Big TekLok

Asking: 200 $ shipped

------------------------------------------------------------------------------------------------------
Knife: Hunter
Steel: Vanadis 4 Extra PM Stainless Tool Steel
Thickness of 3,7 mm
Hardness: 62 HRC Secondary hardness
Handle: Black or red G10 sandblasted
Attachment: Turn black steel M4 imbus screws
Finish blade: Stonewash
Size:
Total length: 250 mm
The width of the blade: 25 mm
Blade 125 mm
Weight 166 to 184(red one) g.
Sheath: 2 mm black ABS with Big TekLok

Asking: 180 $ shipped

------------------------------------------------------------------------------------------------
Knife: ODC140
Steel: O2 Tool Steel
Thickness of 4,4 mm
Hardness: 59 HRC
Handle: Brown Micarta, G10 Black or Red sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash after fine sandblasting
Size:
Total length: 270 mm
The width of the blade: 32 mm
Blade 140 mm
Weight 278 - 298 g.
Sheath: 2 mm black ABS 2 mm with Big TekLok

Asking: 150 $ shipped

ODC I

ODC II

ODC III

ODC IV

---------------------------------------------------------------------------------------------------------

Knife: PushDagger
Steel: A8Mod Tool Steel
Thickness of 6,8 mm
Hardness: 57-58 HRC
Handle: G10 black sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash
Size:
Total length: 180 mm
The width of the blade: 45 mm
Blade 105 mm
Weight 255 g.
Sheath: 1,5 mm black Kydex with Big TekLok

Asking: 200 $ shipped

------------------------------------------------------------------------------------------------------------

Knife: AgorEDC
Steel: Vanadis 4 Extra PM Stainless Tool Steel
Thickness of 4,7 mm
Hardness: 63 HRC Secondary hardness
Handle: G10 Black sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 255 mm
The width of the blade: 33 mm
Blade 125 mm
Weight 219 g.
Sheath: 1,5 mm black Kydex with Big TekLok

Asking: 200 $ shipped

Knife I

-------------------------------------------------------------------------------------

Knife: Bushcraft
Steel: O1 Tool Steel
Thickness of 4 mm
Hardness: 60 HRC

Handle: G10 Orange + 1 mm yellow liners
Attachment: Turn black M5 imbus screws
Finish blade: Satin
Size:
Total length: 220 mm
The width of the blade: 30 mm
Blade 110 mm
Weight 180 g.
Sheath: 1,5 mm black Kydex with Big TEKLOK

Asking: 150 USD Shipped

----------------------------------------------------------------------------------------------------------
Knife: Agor
Steel: O2 Tool Steel
Thickness of 4,4 mm
Hardness: 60 HRC
Handle: Brown Micarta sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash
Size:
Total length: 265 mm
The width of the blade: 32 mm
Blade 140 mm
Weight 255 g.
Sheath: 1,5 mm black Kydex/ABS 2 mm with Big TekLok

Asking: 150 $ shipped

Agor I

Agor II

------------------------------------------------------------------------------------------------------------
Knife: Mikko
Steel: O2 Tool Steel
Thickness of 4,4 mm
Hardness: 60 HRC
Handle: Brown Micarta sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash
Size:
Total length: 265 mm
The width of the blade: 32 mm
Blade 130 mm
Weight 255 g.
Sheath: 1,5 mm black Kydex/ABS 2 mm with Big TekLok

Asking: 150 $ shipped

---------------------------------------------------------------------------------------------

IMPORTANT NOTE:

Bohler Stainless Steel N690 tool steel is very good steel.
But when hard is not very tough for heavy works especially with the tip.

So:
No rust, holds working edge long, easy to sharpen but not suitable for tanks or windows opening. You can loose the tip.

Perfect for kitchen, cutting, slicing or skinning.

Please consider this when buying.

J.
--------------------------------------------------------------------------------------------------
Knife: Agor
Steel:N690 Bohler Stainless Tool Steel
Thickness of 4,4 mm
Hardness: 58 HRC Secondary hardness
Handle: Brown canvas micarta sandblasted
Attachment: Turn stainless steel M5 torx screws
Finish blade: Stonewash
Size:
Total length: 265 mm
The width of the blade: 34 mm
Blade 140 mm
Weight 245 g.
Sheath: 2 mm black ABS with Big Tek-Lok

Asking price: 150 $ shipped

 

[WILLIAM.M]

You make some VERY SWEET knives

HARD to pick a favorite in this post

Bravo!!!!!

 

[1Hiker2]

Beautiful knives!

 

[Pelagicfun]

I cannot see the bushcraft photo?

 

[KornalskiKnives]

I cannot see the bushcraft photo?

Now should work well Little bug in the url

Thanks for kind words.

Adam