I am in Canada, prices in US $ (Paypal accepted, fees and shipping included.) Open to offers, worst that can happen is I say no thanks....
Darrin Sanders Kiridashi, (smaller knife) one year old, carried regularly, has a low angle chisel (zero grind) and was sharpened on DMT diamond stones twice in the year I have had it. I am the first and only owner. Comes with a paracord wrap to make gripping easier, and a kydex sheath. This is in CPM 10V, if you know the steel you know it takes an edge and holds it well. If you don't know the steel and want to try it here's your chance.
There are two small marks on the one side from hardness testing, it came with those. Overall length is 4.5", cutting edge is approx. 1.6"
was $145 USAsking $95 US .
20151201_085149 by rapt_up, on Flickr
20151201_085226 by rapt_up, on Flickr
20151201_085319 by rapt_up, on Flickr
SOLD!!!!Daniel Koster Karda 6 in CPM 3V, (larger knife) these little knives seem to be hard to come by. Or at least not really common on the sites, I'm not sure if that because few were made or everyone hangs on to them. Its a solid, even hefty, knife for its size. Stock is 0.175" thick CPM 3V means this sucker is going to be crazy tough, and has a full flat grind with very sharp edge. 3V takes a very fine edge and holds it well due to toughness and edge stability. I am at least the second owner and the edge looks to me to be original. I have never cut anything with the knife, but it feels very sharp. I suspect this knife has only been handled, never used. There are some kydex marks on the blade plus a small dimple on the non presentation side from hardness testing. Handle is black and gray G10 with a bead blasted finish that is very grippy and very attractive in an understated way. Comes with a nice Kydex sheath, and looks much better in person than the pictures indicate. OAL 7.5", cutting edge is 3.25" These sell for $229 when they are available from a well known retailer....
Was $165Asking $145 US SOLD
Darrin Sanders Kiridashi, (smaller knife) one year old, carried regularly, has a low angle chisel (zero grind) and was sharpened on DMT diamond stones twice in the year I have had it. I am the first and only owner. Comes with a paracord wrap to make gripping easier, and a kydex sheath. This is in CPM 10V, if you know the steel you know it takes an edge and holds it well. If you don't know the steel and want to try it here's your chance.
There are two small marks on the one side from hardness testing, it came with those. Overall length is 4.5", cutting edge is approx. 1.6"was $145 USAsking $95 US .
20151201_085149 by rapt_up, on Flickr20151201_085226 by rapt_up, on Flickr20151201_085319 by rapt_up, on FlickrSOLD!!!!Daniel Koster Karda 6 in CPM 3V, (larger knife) these little knives seem to be hard to come by. Or at least not really common on the sites, I'm not sure if that because few were made or everyone hangs on to them. Its a solid, even hefty, knife for its size. Stock is 0.175" thick CPM 3V means this sucker is going to be crazy tough, and has a full flat grind with very sharp edge. 3V takes a very fine edge and holds it well due to toughness and edge stability. I am at least the second owner and the edge looks to me to be original. I have never cut anything with the knife, but it feels very sharp. I suspect this knife has only been handled, never used. There are some kydex marks on the blade plus a small dimple on the non presentation side from hardness testing. Handle is black and gray G10 with a bead blasted finish that is very grippy and very attractive in an understated way. Comes with a nice Kydex sheath, and looks much better in person than the pictures indicate. OAL 7.5", cutting edge is 3.25" These sell for $229 when they are available from a well known retailer....
Was $165Asking $145 US SOLD
Last edited:
