Help request put in😥That's fine with me, I'll add you to the list momentarily.
Then I have no idea...maybe start a thread in tech support?
-
The BladeForums.com 2024 Traditional Knife is ready to order! See this thread for details: https://www.bladeforums.com/threads/bladeforums-2024-traditional-knife.2003187/
Price is$300$250 ea (shipped within CONUS). If you live outside the US, I will contact you after your order for extra shipping charges.
Order here: https://www.bladeforums.com/help/2024-traditional/ - Order as many as you like, we have plenty.
*NEW spyderNation open sign up thread"
- Thread starter 9blades
- Start date
- Joined
- Jun 15, 2014
- Messages
- 204
For all SpyderNation members:
I have read and agree to all of the rules and requirements. I currently have no posts on the SpyderNation sub-forum but plan to begin active participation ASAP. I currently own 2 Spyderco models that I have purchased in the last 5 months. A Sage1 and a Sage2 with a Para-military2 on preorder. I currently have no pictures of these because of my inability to understand smartphone photographic procedures. I would like to reserve #9311 if it has not been used and if I meet all of the sub-forum requirements.
Regards,
Tuckerone1
I have read and agree to all of the rules and requirements. I currently have no posts on the SpyderNation sub-forum but plan to begin active participation ASAP. I currently own 2 Spyderco models that I have purchased in the last 5 months. A Sage1 and a Sage2 with a Para-military2 on preorder. I currently have no pictures of these because of my inability to understand smartphone photographic procedures. I would like to reserve #9311 if it has not been used and if I meet all of the sub-forum requirements.
Regards,
Tuckerone1
- Joined
- Dec 24, 2007
- Messages
- 1,599
I have read the rules 7 requirements and I pass with those but at present I have no Pic's as my Camera was stolen so I am out of luck but will try to get some Pic's in later.
Was born in Columbus.Oh. and around 8 moved to the big city of West Jefferson,Oh. and at 10 moved to Dayton.Ohio so that my Dad was closer to the Base ( WPAFB ) he retired when I was 16 and we moved to Tallahassee,Florida and I went on to FSU and went into Sales. Retired and bought a Business in Nashville,Tn. and sold out after 3 years and ended up buying a nice place out in the Country in Loudon,Tn. and planning on living here until it is time to go.** Like to Fish & Hunt & Collect Knives among other things that would not be interesting to anybody else.* lol
I have over 50 Spydie Post..!!** If I am in I would like #6044 as the Old Ruger Single Six in 44 Mag. is still one of the fun Guns to shoot & Collect {have 6 of them & no the Triggers have not been replaced by the new ones.!
My Favorite Spydie is the "KRIS" and yes I do have a 'few' of them & all Engraved ~~ you can see one by looking under the Master Engravers "Andrew".!!
Thats all Folks.
Was born in Columbus.Oh. and around 8 moved to the big city of West Jefferson,Oh. and at 10 moved to Dayton.Ohio so that my Dad was closer to the Base ( WPAFB ) he retired when I was 16 and we moved to Tallahassee,Florida and I went on to FSU and went into Sales. Retired and bought a Business in Nashville,Tn. and sold out after 3 years and ended up buying a nice place out in the Country in Loudon,Tn. and planning on living here until it is time to go.** Like to Fish & Hunt & Collect Knives among other things that would not be interesting to anybody else.* lol
I have over 50 Spydie Post..!!** If I am in I would like #6044 as the Old Ruger Single Six in 44 Mag. is still one of the fun Guns to shoot & Collect {have 6 of them & no the Triggers have not been replaced by the new ones.!
My Favorite Spydie is the "KRIS" and yes I do have a 'few' of them & all Engraved ~~ you can see one by looking under the Master Engravers "Andrew".!!
Thats all Folks.
Last edited:
Congrats on a spectacular career! Enjoy your hunting and fishing time. That 44 Magnum packs a wallop. I'm retired LEO and range master. It is and was one of my faves to shoot. I love the reliable strong muzzle flip, not at all like the Glock I carried for years, it had more of a snap. Thanks for your post, I love hearing those types of stories!
- Joined
- Dec 12, 2013
- Messages
- 14,830
Hey Murfdog, Welcome. This group thread is a "members only" sub forum. Not an actual full bore part of the public domain accessable to BF members. Note: you just joined it and that was a totally seperate thing fromwhen you joined and registered with BF.. This is a club, brotherman. Clubs are not all Tappa Dappa Doopa Doo. And we like it that way.
G...
Point taken sir, but until I get my new laptop, other bit the dust, I am stuck using tapa talk 😥
- Joined
- Dec 29, 2012
- Messages
- 8,032
Sorry I missed this!! I'll add you to the list momentarily.
- Joined
- Dec 9, 2006
- Messages
- 1,389
I am back from vacation.Any new members who have a new number that was approved by 9blades should have an invitation to join or have been added already.Those that have joined please don't forget to join the group page.A warm welcome to the new members and and thanks for the patience while I was on vacation.
link to spydernation group page
I had a nice vacation and fished at Brookings,Gold beach, and drifted the middle Rogue river in Oregon.My wife caught her first steelhead.
Thank you,
salmonkiller
link to spydernation group page
I had a nice vacation and fished at Brookings,Gold beach, and drifted the middle Rogue river in Oregon.My wife caught her first steelhead.
Thank you,
salmonkiller
- Joined
- Sep 17, 2011
- Messages
- 35
1. read this first.Done
2. Reserve your post slot. Everything you will need to do should only be on this one post.Not sure what this means...
3. State that you have read Introduction thread in its entirety on your post.Done. I have read the introduction thread in its entirety!
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum.Here I have 2 on spyderco forums I have 21
5. Share a picture of your Spyderco knife/knivesSee Below
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time.I would like #0150
7. If you request an exception for requirement #2, do so and PM/email me with your case.Emailed!
2. Reserve your post slot. Everything you will need to do should only be on this one post.Not sure what this means...
3. State that you have read Introduction thread in its entirety on your post.Done. I have read the introduction thread in its entirety!
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum.Here I have 2 on spyderco forums I have 21
5. Share a picture of your Spyderco knife/knivesSee Below
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time.I would like #0150
7. If you request an exception for requirement #2, do so and PM/email me with your case.Emailed!
- Joined
- Dec 29, 2012
- Messages
- 8,032
1. read this first.Done
2. Reserve your post slot. Everything you will need to do should only be on this one post.Not sure what this means...
3. State that you have read Introduction thread in its entirety on your post.Done. I have read the introduction thread in its entirety!
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum.Here I have 2 on spyderco forums I have 21
5. Share a picture of your Spyderco knife/knivesSee Below
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time.I would like #0150
7. If you request an exception for requirement #2, do so and PM/email me with your case.Emailed!
Sorry I'm so late getting to you
welcome to spydernation! I'll add you to the list.
- Joined
- Feb 19, 2014
- Messages
- 1,184
Applying for my SpyderNation number!
1. read this first. - DONE
2. Reserve your post slot. Everything you will need to do should only be on this one post. - I believe that is this post, so DONE.
3. State that you have read Introduction thread in its entirety on your post. - I have read the introductory thread in its entirety.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum. - I have 55 total posts, all here on the Bladeforums Spyderco subforum.
5. Share a picture of your Spyderco knife/knives
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time. - I would like to request #0624, please.
7. If you request an exception for requirement #2, do so and PM/email me with your case. - No exception requested
8. Once you are cleared, you get a welcome post. - Received!
9. Become part of the group page, after you get welcome you're post right here. Completed!!!
1. read this first. - DONE
2. Reserve your post slot. Everything you will need to do should only be on this one post. - I believe that is this post, so DONE.
3. State that you have read Introduction thread in its entirety on your post. - I have read the introductory thread in its entirety.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum. - I have 55 total posts, all here on the Bladeforums Spyderco subforum.
5. Share a picture of your Spyderco knife/knives
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time. - I would like to request #0624, please.
7. If you request an exception for requirement #2, do so and PM/email me with your case. - No exception requested
8. Once you are cleared, you get a welcome post. - Received!
9. Become part of the group page, after you get welcome you're post right here. Completed!!!
Last edited:
- Joined
- Dec 29, 2012
- Messages
- 8,032
Applying for my SpyderNation number!
1. read this first. - DONE
2. Reserve your post slot. Everything you will need to do should only be on this one post. - I believe that is this post, so DONE.
3. State that you have read Introduction thread in its entirety on your post. - I have read the introductory thread in its entirety.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum. - I have 55 total posts, all here on the Bladeforums Spyderco subforum.
5. Share a picture of your Spyderco knife/knives
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time. - I would like to request #0624, please.
7. If you request an exception for requirement #2, do so and PM/email me with your case. - No exception requested
8. Once you are cleared, you get a welcome post. - Got it. Thanks!
9. Become part of the group page, after you get welcome you're post right here. Look forward to continuing the conversation there.
#0624 it is, welcome to spydernation sir.
- Joined
- Feb 19, 2014
- Messages
- 1,184
Excellent! Thanks 9blades!#0624 it is, welcome to spydernation sir.
- Joined
- Oct 26, 2013
- Messages
- 882
1. read this first.
2. Reserve your post slot. Everything you will need to do should only be on this one post.
3. State that you have read Introduction thread in its entirety on your post.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum.
5. Share a picture of your Spyderco knife/knives
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time.
7. If you request an exception for requirement #2, do so and PM/email me with your case.
8. Once you are cleared, you get a welcome post.
9. Become part of the group page, after you get welcome you're post right here.
I have read the rules, conditions, and introduction, and fully agree with them. My combined post total between the Spyderco forum and BladeForums Spyderco sub-forum is (Including this post) 1343 if my mental math is correct. Included is a picture of my Spyderco collection (Including a ByrdWrench, and minus a Spyderco Serrata that I've bought since this picture was taken). As for number I'm not picky at all...I'll take whatever number is next in line/most convenient. If there's anything I've forgotten or misread I'll be more than happy to work it out. Looking forward to being a member of SpyderNation.
2. Reserve your post slot. Everything you will need to do should only be on this one post.
3. State that you have read Introduction thread in its entirety on your post.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum.
5. Share a picture of your Spyderco knife/knives
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time.
7. If you request an exception for requirement #2, do so and PM/email me with your case.
8. Once you are cleared, you get a welcome post.
9. Become part of the group page, after you get welcome you're post right here.
I have read the rules, conditions, and introduction, and fully agree with them. My combined post total between the Spyderco forum and BladeForums Spyderco sub-forum is (Including this post) 1343 if my mental math is correct. Included is a picture of my Spyderco collection (Including a ByrdWrench, and minus a Spyderco Serrata that I've bought since this picture was taken). As for number I'm not picky at all...I'll take whatever number is next in line/most convenient. If there's anything I've forgotten or misread I'll be more than happy to work it out. Looking forward to being a member of SpyderNation.
- Joined
- Aug 14, 2010
- Messages
- 621
I read and agree to everything.I have posted 32 times in the spydy subforum.I currently own an Endura ffg and an Endura combo edge.The wife carries a dragonfly tattoo(exclusively, says its the only knife she needs 
) I also have a Q in the box on the shelf and have owned a full serattion Endura and Native in the past.Currently looking to get a Techno and a roc.We keep it all sharp on the SharpMaker.My son made a wooden kit dragonfly he has since beat it apart so no longer in collection lol
I would like number 2525 if available.
) I also have a Q in the box on the shelf and have owned a full serattion Endura and Native in the past.Currently looking to get a Techno and a roc.We keep it all sharp on the SharpMaker.My son made a wooden kit dragonfly he has since beat it apart so no longer in collection lol I would like number 2525 if available.
Last edited:
- Joined
- Oct 26, 2013
- Messages
- 882
3rdGenRigger - everything's in order, welcome to spydernation. How about 1343?
Works for me.
- Joined
- Aug 14, 2010
- Messages
- 621
Yee haw! Good to be here, thanks!
Why haven't I done this yet? I'd love to be a member.
1. Read this. - Done
2. Reserve your post slot. Everything you will need to do should only be on this one post. - Done
3. State that you have read Introduction thread in its entirety on your post. - I have read the introductory thread in its entirety.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum. - I have 239 posts here on BF, 72 on Spyderco.com Forums, and I'm also on USN.
5. Share a picture of your Spyderco knife/knives. Here are a few...
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time. - #1001, please.
7. If you request an exception for requirement #2, do so and PM/email me with your case. - None
8. Once you are cleared, you get a welcome post. - ...
9. Become part of the group page, after you get welcome you're post right here. - ...
1. Read this. - Done
2. Reserve your post slot. Everything you will need to do should only be on this one post. - Done
3. State that you have read Introduction thread in its entirety on your post. - I have read the introductory thread in its entirety.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum. - I have 239 posts here on BF, 72 on Spyderco.com Forums, and I'm also on USN.
5. Share a picture of your Spyderco knife/knives. Here are a few...
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time. - #1001, please.
7. If you request an exception for requirement #2, do so and PM/email me with your case. - None
8. Once you are cleared, you get a welcome post. - ...
9. Become part of the group page, after you get welcome you're post right here. - ...