New to this!!!!!

J

Justin Howell

Joined
Feb 11, 2012
Messages
28
Hello, my name is Justin Howell. I have never built a knife. I have always wanted to. So I bought some materials and am un patiently awaiting their arrival to get started. I have several questions I need to ask

1. Is there somwhere I can send my untreated blades to get them forged? I plan on building my own in time but right now it is far better that I just send them away.

2. What kind of files do you guys use for getting these blades to specs. I assume that a belt sander is used to rough them in, then file work to finish. I may not be correct about that.

3. Are theri any useful books I need to read or is this a trial and error kind of thing.

And where is the best place to get your 1080 barstock steels.

Thanks and God Bless
 
Welcome to the Bladeforums.

Filling out your profile will help us help you. The sticky on "Instructions for making a knife" will tell you all that you asked about and more.
 
At the top right corner of the main page you will see "Settings" Click that and then look along the left hand side of the page. You will see the "Edit Profile". Fill in all the data with real info - Plymouth ,Mass is a real place....... Somewhere in the great outdoors isn't.

Many times there is a maker near you, but he would never know without this useful info. Also, the answer to a high school student will be different than that to a retired machinist.
 
Have a look at this




I've put this together to answer most of a new maker’s questions on how to make a knife. I'm sure it will help you too. How to Instructions for making a Knife.

The Count's Standard Reply to New Knifemakers V23

The answer to a 13 year old student is different than to a 40 year old engineer.
We may recommend a local supplier, you may have a helpful neighbour, or local Hammerin; but that depends on where you are. We have members worldwide.
Please fill out your profile with your location (Country, State, City), age, education, employment, hobbies.

Look at the threads stickied at the top; many are expired, but not all.

The basic process in the simplest terms
Absolute Cheapskate Way to Start Making Knives-Printable PDF-Right Click and Save
Absolute Cheapskate Way to Start Making Knives-Website


Web Tutorials
Detailed instructions by Stacy E. Apelt

The Things I Advise New Knife Makers Against-Printable PDF

Handle Tutorial - Nick Wheeler-PDF

http://www.engnath.com/manframe.htm

Books
A list of books and videos

BladeForums - E-books or Google books


I like:
David Boye-Step by Step Knifemaking
Tim McCreight-Custom Knifemaking: 10 Projects from a Master Craftsman
These are clear, well organized, widely available and inexpensive too.

Knife Design:

Think thin. A paring knife slices, an axe doesn't.
Forget swords, Saw-tooth spines, guthooks, crazy grinds and folders for your first knife.

Start with a drawing.
Show it to us, we love to see and comment on photos.
Then make a cardboard cutout template & draw in handles, pins and such
Then make it in wood, paint sticks are free & close to the right size.
Play with that and see if it “feels right”. If it feels right it usually “looks right“

How to post a photo on BF
http://www.bladeforums.com/forums/showthread.php/742638-TUTORIAL-Displaying-your-photographs-on-BladeForums

See the Google books thread for Lloyd Harding drawings, the Loveless book & Bob Engnath Patterns. Google books thread

Bob Engnath Patterns compiled into a PDF


Forging Books:
Lorelei Sims-The Backyard Blacksmith
An excellent modern book with colour photos for forging in general - no knifemaking.

Jim Hrisoulas- has 3 books on forging knives. Check for the cheaper paperback editions.
The Complete Bladesmith: Forging Your Way to Perfection
The Pattern-Welded Blade: Artistry in Iron
The Master Bladesmith: Advanced Studies in Steel

Machine Shop Basics -Books:
Elementary Machine Shop Practice-Printable PDF

The Complete Practical Machinist-Printable -1885-PDF
Right Click and save link as.
It’s being reprinted now; you can get it for $20 ish

The $50 knife Shop
It confused me for a long time.
Forging is NOT necessary; you can just file and grind to create a knife (stock removal)

Forget the Goop Quench.
Use commercial quench oil & match oil speed to the steel type; even grocery store canola oil works much better for some steels.

Junkyard steels require skill and experience to identify the steel and heat treat it properly.
Forget about Lawnmower blades and start with a new known steel type.
Good heat treating needs accurate temperature control and full quench.
You can buy proper steel like 1084FG from Aldo very cheaply.

I like cable damascus, but that advanced project has no place in a beginner’s book.

The grinders are the best thing about this book, but there is a huge amount of info for 2x72” belt grinders on the web, including free plans.


Videos

Heat Treating Basics Video-downloadable
Right click and save this. Watch it once a day for 10 days.

Safety-video
Right click and save this. Watch it once a day for 10 days.

Many specific how to knifemaking videos are available, some are better than others.

The best overall Knifemaking video I have seen is
“Steve Johnson-Making a Sub-Hilt Fighter”

Basic Bladesmithing
"Ed Caffrey - Basic Bladesmithing-Full DVD-ISO"

The best video on leather sheath making for beginners that I have seen is
“Custom Knife Sheaths -Chuck Burrows - Wild Rose”
-(Paul Long has 2 videos, his sheath work & videos are fantastic, but more advanced-with inlays, machine stitchers..)

Green Pete's Free Video
Making a Mora bushcraft knife, stock removal, hand tools, neo tribal / unplugged heat treat.
Use a piece of known steel, not a file. I just post this as an example of doing it by hand with few tools.
"Green Pete" posted it free using torrent files.
Be sure to look at the other titles too-The account index has disappeared, but search for LOTS of info. Use the keywords “LurkerLurker torrent” “knifemakerC torrent” and others
Greenpete Knifemaking Basics-on TPB

How to download that video
http://www.utorrent.com/help/guides/beginners-guide

You can see a list of videos and reviews at this rental company; some are worth buying, some renting…
http://smartflix.com/store/category/9/Knifemaking

Draw Filing Demonstration
YouTube video -Draw Filing-for a flat finish

Steel
The “welding steel” at Home Depot / Lowes… is useless for knives.
Forget about lawnmower blades ,files and other unknown junkyard steels.
For all the work involved, it is very cheap to buy and use a known good steel.

If you send out for heat treating, you can use
Oil quenched O1, 1095, 1084
Or air quenched A2, CM154, ATS34, CPM154, 440C, plus many others.

For heat treating yourself with minimal equipment, find some Eutectoid steel.
1084FG sold by Aldo Bruno is formulated for Knifemaking, Cheapest & made for DIY heat-treat.
http://njsteelbaron.com/
Phone # 862-203-8160

1095 is a good carbon steel, but a bad choice for a beginner with limited equipment.
1095 is "Hypereutectioid" and needs very precise temperature control and proper fast quench oil Like Parks 50 or Houghton K Kevin Cashen - 1095 - hypereutectoid steel

If you are sending one or 2 knives out for heat treatment, use 154-CM or CPM-154 and ship it out to TKS -Texas Knifemaker Supply
It's the cheapest way to do 1 or 2 because of HT minimum charges.


You can find a list of suppliers here

Heat Treating
http://www.bladeforums.com/forums/showpost.php?p=9143684&postcount=7

You can send blades out for heat treating at $10 or $15 per blade for perfect results, and avoid buying the equipment.

Air Hardening Stainless Steel Only
Buck Pau Bos -Be sure to check the Shipping and Price tabs.
http://www.buckknives.com/index.cfm?event=bio.paulBos#
http://www.texasknife.com/vcom/privacy.php#services

Oil Hardening Carbon Steels and Air Hardening Stainless Steel
http://www.petersheattreat.com/cutlery.html
http://www.knifemaker.ca/ (Canadian)


Quenchants for Oil hardening steel
Forget the Goop Quench.
Forget used motor oil, it's toxic and doesn't work that well.

Use commercial quench oil & match oil speed to the steel type;

Even grocery store canola oil works well enough for your first knife-if you use the right steel.

Brine and water are almost free, and technically correct for W1 and "water hardening" steels but a fast oil like Parks 50 and Houghton Houghto Quench K are less likely to give you broken blades.
If you use water or brine, expect to have a cracked or broken blade.
Search the work "tink" for more info


Glue – Epoxy

Use a Fresh package of slow setting, high strength epoxy to attach blades to handles and well as seal out moisture.
Surface Prep is vital, drill tang holes/ grind a hollow, roughen the surfaces with abrasive, blasting is best.
Ensure the surface is clean & no oil including fingerprints. Soap, Acetone & Alcohol, Blasting.
Clamp with moderate pressure= avoid a “glue starved joint” when all the adhesive is squeezed out.
These are well proven.
Brownell's Acraglas
West Systems G Flex
JB Weld


Grinder / Tools

In my opinion, variable speed and a small wheel attachment are essential on a good grinder.
You can almost always improve tracking with more belt tension. It needs to be way tighter than you first think.

Hand Tools
You can do it all by hand with files and abrasive cloth like the Green Pete video.
Files can be made from unhardenable steel, or steel similar to 1095 that needs a difficult HT
Just use 1084 instead of a file.

Photo of a nice bevel filing jig

Entry Level Grinders
Many makers start with the Sears Craftsman 2x42 belt grinder

Low Speed Modification Craftsman 2x42 belt grinder


Commercial Production 2 x 72” Belt Grinder Reviews
http://www.prometheanknives.com/shop-techniques-3/grinders
http://www.cnccookbook.com/CCKnifeMakingGrinders.htm

Mapp arm – Grinder Toolrest


DIY 2 x 72” Belt Grinders

KMG Clone Free Plans
http://www.dfoggknives.com/PDF/GrinderPlans.pdf

NWG No Weld Grinder
http://www.usaknifemaker.com/plans-for-the-no-weld-grinder-sander-nearly-50-pages-p-723.html

EERF Grinder (EERF =“Free” backwards)
http://wilmontgrinders.com/EERFGrinder.aspx
http://blindhogg.com/blueprints.html

Buy the kit
http://polarbearforge.com/grinder_kit.html

What Belts to buy?
http://www.usaknifemaker.com/abrasive-belt-basics-what-kind-should-i-buy-p-1393.html



VFD Variable Speed made simple

Simplest, and cheapest are hardly ever the same.

Yes you can get cheaper NEMA 1 VFD’s and build your own enclosure
Or you may find them cheaper at other retaillers, but watch shipping.

Wayne Coe
http://www.waynecoeartistblacksmith.com/Motors___VFDs.html

VFD-
KBAC-27D

Motor
3 phase 220v 1.5 HP motor, TEFC, frame 56 or 56C, RPM is up to you.
Make sure it has a footed base for the KMG ad NWG, or a C flange face mount for Bader and GIB styles.
I get them on ebay, even with paying $80 for shipping to Canada I save $$$ on a used motor.


Wiring kit
Wiring kit - for 115v VFD includes 8' 14 gage molded cord, 2' 4 conductor wire for from VFD to motor, cable glands, wire nuts and grounding connectors $45.00 including shipping CONUS.


The 1.5 HP combination is the most common setup, as reported by Rob Frink in some thread somewhere
It allows you to plug into any 110vac, 15 amp outlet.
A 2 HP motor requires a 220vac input.

There are cheaper VFD units like the TECO, but the only VFD I have found that will run a 1.5 HP motor on a 110v 15 amp input is the KBAC27D

It is NEMA4, sealed from metal dust that can smoke the unit.
It has good community and company support, like the manuals, hook-up diagrams, photos and adjustment settings on Rob Frink’s website.

I like the fact that I can buy it from a local distributor in Canada.

Travis W reported being able to run a 2 HP on a 110v circuit, but I haven’t tried it.

Hookup is dead simple-Here's how
http://www.beaumontmetalworks.com/VS-setup.html




Safety Equipment
Protect your -Eyes, Ears, Fingers, and Lungs – remove jewellery and put on safety gear.

Respirators
Chronic lung disease and cancer really suck the joy out of life.
Don't believe me? google "Ed Caffrey lung cancer" and see what he has to say about it.

The minimum I would consider are the 3M 7500 and North 7700 silicone half masks with a P100 Filter.
Use a VOC & P100 combo cartridge for protection against acetone and solvents.
There are also prefilters that snap over the main filter for longer life.

For beards, pick one of these
3M PAPR
Resp-O-Rator
3m Breathe Easy
Trend Airshield Pro
Air Cap II


Searching
Search works for ALL users, even unpaid users.
Try it, I’ll bet you’re not the first to ask the question here

This is a special Google page that searches BF only & works better than the forum search.
http://www.google.com/cse/home?cx=011197018607028182644:qfobr3dlcra

V23 Feb 6, 2012
Added VFD’s made simple

Countavatar.jpg
 
Justin Howell said:
Hello, my name is Justin Howell. I have never built a knife. I have always wanted to. So I bought some materials and am un patiently awaiting their arrival to get started. I have several questions I need to ask

1. Is there somwhere I can send my untreated blades to get them forged? I plan on building my own in time but right now it is far better that I just send them away.

Maybe you meant to ask about heat treatment, not forging??? Making this assumption, yes there are places where you can send blades for heat treatment. Many of them will only do air-quenched steel (as opposed to oil or water-quenched steel). I've never used these services so others with REAL experience would give you a better answer. The count gives links to several places in his post so check them out.

2. What kind of files do you guys use for getting these blades to specs. I assume that a belt sander is used to rough them in, then file work to finish. I may not be correct about that.

In my opinion a LARGE mill bastard file is very important, not that other types and sizes aren't, but with this file you can draw file a bevel and remove metal well. I don't use my small files very much.

3. Are theri any useful books I need to read or is this a trial and error kind of thing.

Even with reading books it's trial and error because you are learning new skills. I would suggest you read through the forum until your eyes fall out. There is so much information there but you have to work to find it. The Count's post will answer many of your questions.

And where is the best place to get your 1080 barstock steels.

The answer to this is in the Count's post.

Thanks and God Bless
Click to expand...

What sort of knife are you planning to make? Good luck.

- Paul Meske
 
Fixed blade hunting inspired knife's. I have spent Lord only knows how much $ and owned countless production knives, only to sell them all because I was unhappy with their performance in one or more ways. I took notes and drafted drawigs of knives all long designing what would be the very best design, weight, ergonomics, in the perfect knife.

I have six models designed for specific hunting situations inspired by these notes and expierences that I intend to make. Standing in a deep Colorado canyon getting stung and eat alive by bees because your very expensive knives will not hold an edge well enough to get a big bull deboned and bagged before ten thousand yellow jackets swarming you is a bad time to find out you got the wrong knife, and an over priced piece of crap to boot. Having this happen seeral tims with countless other bad expierences has me looking to build a series of knives to my specs. I also intend to make a lifelong hobby out of it.

So, I will be looking for some advice and help along the way. I'll try to get some pics of the knives in drawings and will keep you guys upto date on my progress. BTW, I own 2 really good knives, both are custom jobs. One was made by my dad which is put up so as not to lose, the other was made by Brandon Sullivan which is a very nice knife, but I just want to make knives. God Bless
 
Welcome to BF, Justin.

Looks like you are well on your way.

And like I said I am looking forward to seeing your work.

Brandon
 
You must log in or register to reply here.
Back
Top