- Joined
- Sep 27, 2008
- Messages
- 376
BOSS Mistress!!!
+1 what he said!
-
The BladeForums.com 2024 Traditional Knife is available! Price is $250 ea (shipped within CONUS).
Order here: https://www.bladeforums.com/help/2024-traditional/
Next release !!!
- Thread starter gixxerman
- Start date
+1 what he said!
- Joined
- Oct 10, 2002
- Messages
- 7,484
.
I would hope for something refreshing and new like a FOLDER. Everything that has come out lately is either a old design basically redone or a blade that will never be used. I have all the fixed blades in every size range that I will ever need 10X over, I would really like something I would use often like a FOLDER (not that I don't have too many folders already, but I do use them daily).
.
I would hope for something refreshing and new like a FOLDER. Everything that has come out lately is either a old design basically redone or a blade that will never be used. I have all the fixed blades in every size range that I will ever need 10X over, I would really like something I would use often like a FOLDER (not that I don't have too many folders already, but I do use them daily).
.
Last Visible Canary
actively parsing hurf durf
- Joined
- Nov 28, 2006
- Messages
- 4,577
I hate even coming up with potential blades that might be released that I'd like to see, because I really don't have the money for more knives, especially ones I'm actually likely to keep and use. BUT.... an choiless anorexic boss jack would be pretty cool. and it wouldn't be that hard to set up the manufacturing for since the boss jack was so close, not unlike the boss street/anorexic boss street timing.
that is one of the knives that I'd buy and not be able to sell because it was so functional and, historically, so unlike busse combat to produce.
that is one of the knives that I'd buy and not be able to sell because it was so functional and, historically, so unlike busse combat to produce.
- Joined
- May 31, 2005
- Messages
- 6,860
How about a Muk?
BOSS Mistress!!!
0.25'' Nuclear Meltdown Sarsquatch!!!!
INFI Old Style ratweiler!!!!!
FSH with corrugation bevels!!!!!
Or...
Short MOFBM!!!!!! :
This is knid of a neat idea if a folder is'nt going to happen.
- Joined
- Jan 28, 2008
- Messages
- 2,062
1> a a Steel Heart II that is nuclear meltdown
2> a old school A2 style Badger attack that is Nuclear meltdown
3> a Busse Samurai sword... yes it would be expensive
4> make some more meaner streets
5> short thick carrier... kinda like a Busse version of the Micrtech Currahee
6> a folder would be nice... but at this point, I"m very happy with my Zero Tolerance 0350 for EDC, my ZT 0200 for going out on the town, and my ZT 0301 for going hiking if I don't have a busse fixed blade on my side. I've owned a Chris Reeves sebenza, and sold it once I started getting into ZT folders. I don't know if Busse could beat them.. "yes, I'm trying to antagonize them into doing it!"
2> a old school A2 style Badger attack that is Nuclear meltdown
3> a Busse Samurai sword... yes it would be expensive
4> make some more meaner streets
5> short thick carrier... kinda like a Busse version of the Micrtech Currahee
6> a folder would be nice... but at this point, I"m very happy with my Zero Tolerance 0350 for EDC, my ZT 0200 for going out on the town, and my ZT 0301 for going hiking if I don't have a busse fixed blade on my side. I've owned a Chris Reeves sebenza, and sold it once I started getting into ZT folders. I don't know if Busse could beat them.. "yes, I'm trying to antagonize them into doing it!"
- Joined
- Dec 31, 2005
- Messages
- 2,984
Things I would find interesting are :
Asymetrical Nuclear Meltdown Battlemistress.
Asymetrical Nuclear Killa Zilla.
I would like to compare these with the originals. I am a firm believer that the Asymetrical edge Jerry developed is "the way to go" for field sharpening and prolonged edge retention in chopping/survival knives.
What they need to go with them is something like the Eze Lap Diamond Rod model M which has a ceramic triangle stone instead of the diamond round rod. Instead of being "brass or aluminium " for the hollow tube handle which would fit over the ceramic triangle to protect it .... this needs to be made from hardened smooth tool steel such as A2 to enable the handle to be used like a screw driver shaft in assisting the re-alignment of a rolled burr from stone contact or whatever and then use the ceramic to bring back the edge of the knife after use.
A few strokes on the flat side of the Asymentrical with the rounded tip of the triangle and then a few with the flat wider side and that would have you sorted after a good session with the knife.
Why no-one has made something like this yet beats me ..... I think they would fly out the door ....
Then on the smaller knives like the CABS ... I would like Jerry to experiment with laminating Infi ... so we could have a central section hardened to Rc 62 for edge retention and have softer Infi side sections to give the blade extra strength and maybe even a damascus pattern ? Sort of combining the benefits of normal Rc 58-60 Infi with the extra hardness for edge retention on knives used for "cutting".
Using this technique, if it can be developed, I would love to see Jerry develop a "competition cutter" so the edge is able to take a hard lasting thin grind at the edge with the side/sandwich being able to assist in keeping the blade from rippling/deforming under chopping. Done with a tapered tang and to the dimensions for compliance regarding the handle .... these would still be very strong .... very forward weighted for chopping .... and we could put together a "team Busse" for the comps. There are plenty of guys on here with enough chopping/cutting/sharpening skills to make a good run at this .....
Asymetrical Nuclear Meltdown Battlemistress.
Asymetrical Nuclear Killa Zilla.
I would like to compare these with the originals. I am a firm believer that the Asymetrical edge Jerry developed is "the way to go" for field sharpening and prolonged edge retention in chopping/survival knives.
What they need to go with them is something like the Eze Lap Diamond Rod model M which has a ceramic triangle stone instead of the diamond round rod. Instead of being "brass or aluminium " for the hollow tube handle which would fit over the ceramic triangle to protect it .... this needs to be made from hardened smooth tool steel such as A2 to enable the handle to be used like a screw driver shaft in assisting the re-alignment of a rolled burr from stone contact or whatever and then use the ceramic to bring back the edge of the knife after use.
A few strokes on the flat side of the Asymentrical with the rounded tip of the triangle and then a few with the flat wider side and that would have you sorted after a good session with the knife.
Why no-one has made something like this yet beats me ..... I think they would fly out the door ....
Then on the smaller knives like the CABS ... I would like Jerry to experiment with laminating Infi ... so we could have a central section hardened to Rc 62 for edge retention and have softer Infi side sections to give the blade extra strength and maybe even a damascus pattern ? Sort of combining the benefits of normal Rc 58-60 Infi with the extra hardness for edge retention on knives used for "cutting".
Using this technique, if it can be developed, I would love to see Jerry develop a "competition cutter" so the edge is able to take a hard lasting thin grind at the edge with the side/sandwich being able to assist in keeping the blade from rippling/deforming under chopping. Done with a tapered tang and to the dimensions for compliance regarding the handle .... these would still be very strong .... very forward weighted for chopping .... and we could put together a "team Busse" for the comps. There are plenty of guys on here with enough chopping/cutting/sharpening skills to make a good run at this .....
- Joined
- May 30, 2009
- Messages
- 2,538
- Joined
- Jul 9, 2010
- Messages
- 825
BOSS Mistress!!!
0.25'' Nuclear Meltdown Sarsquatch!!!!
INFI Old Style ratweiler!!!!!
FSH with corrugation bevels!!!!!
Or...
Short MOFBM!!!!!! :
This reminds me of a custom I have in regards to the general shape. I like the design overall and think it could be pretty versatile
I would personally like to see a tomahawk, dragon's fang length katana that had a price point of less than 1k and a revamp of the shbm like snwbrdr's pics. Also anything resembling the battle pappy because I like the double guard. Maybe even an S shaped guard:thumbup:
- Joined
- Oct 27, 2008
- Messages
- 857
Bring the MUK....please?
- Joined
- Jan 5, 2008
- Messages
- 364
I want a skelletonized. mini atomic HOGHAWK. topps max axe,size,
- Joined
- Jun 7, 2007
- Messages
- 14,463
Don't people already have Pappy's? (I'm not following it at all b/c it's not up my alley.)
MUK!! We deserve it. . . and we'd be less annoying.
MUK yeah!!!! :thumbup::thumbup::thumbup:
Bring the MUK!!
What you guys said :thumbup::thumbup:
Bring the MUK :thumbup::thumbup::thumbup:
- Joined
- Oct 11, 2010
- Messages
- 93
SAR 14 or a Folder !!!
- Joined
- Mar 15, 2009
- Messages
- 1,244
Hog Muk.
done deal.
prototyped.
promised.
possible.
punch em out.
check the thread we are ready.
and
no choil anorexic boss jack
and
boss mistress
that will do it for me.
kept the nmsfno and got my snakeskin culti.
i'm stoked
done deal.
prototyped.
promised.
possible.
punch em out.
check the thread we are ready.
and
no choil anorexic boss jack
and
boss mistress
that will do it for me.
kept the nmsfno and got my snakeskin culti.
i'm stoked