DNAIrradiator
Gold Member
- Joined
- Jul 3, 2013
- Messages
- 1,408
These are all BNIB/unused - never sharpened, carried or used to cut anything. Other than where specifically noted, all of them have well-centered blades with strong lockup and action. As noted previously in my last threads, there are some small purple blobs in some pics (in the Spyder logo in the close-ups); these are dead pixels in my iPhone camera sensor.
BNIB Manix 2 Coarse Black G10 CPM-S110V (skeletonized liners!) $OLD!
Heres one you dont see everyday! This knife was carefully constructed myself using a BNIB BD30P sprint run Manix 2, for its coarser G10 texture (better, more grippy than standard Spyderco G10) and skeletonized liners (so its solid yet very light), and a S110V blade retrieved from a BNIB lightweight Manix 2. The action is very smooth and clean, lockup is perfect, and the blade centering is only a bit off to the clip side (see pic; it likely could be adjusted to 100% dead center, but I didnt want to fiddle with it too much). Comes with original box/papers for the lightweight S110V Manix 2. It is completely unused, and was in fact only born yesterday; the price Im asking is $100 less than what it cost me to purchase the two knives separately.
BNIB Schempp Bowie Carbon Fiber CPM-S30V (C190CFP) $OLD!
This is a catch and release for me. This is a really beautiful knife, lovely brass bolsters, and a wicked sharp edge, but I just did not dig the handle ergos. It was opened about 4-5 times and admired, and then put back in its baggie/box. Comes with original box/papers.
BNIB Manix 2 Black G10 CPM-S30V DLC Hollow Ground Partially Serrated (C101GPSBBK2) $OLD!
NIB Lightweight Native 5 Black FRCP CPM-S35VN (C41PBK5) $OLD!
This knife was born a serrated lightweight Native 5, but I swapped the serrated blade into a BNIB G10 Native 5 and put its PE blade into this lightweight frame. Both blades have DOB stamps of April 2015 on them (I have a thread discussing this swap on the Spyderco forum right now). It is 100% functional, and I doubt Spyderco themselves would notice that it wasnt one straight out of their Golden factory. Completely unused, lockup and centering are dead on, with original scary sharp factory edge. Comes with original box/papers for the SE version.
BNIB Centofante 3 Black FRN VG-10 (C66PBK3) $OLD!
This is a BNIB unused Cento 3 I purchased from Amazon last winter. It has small blemishes on the handle near the Spyder bug inlay where some glue seeped up onto the scale, and it looks like someone tried to lightly scratch it off (see pic). Im past my available time window of returning it to Amazon, so Im hoping it will now find a good home where someone will use it hard like Sal intended! Very sharp 2.5 mm VG-10 blade with unused factory edge (this baby is superior to the Delica in many ways IMHO). Original box; it didnt come with papers.
NIB Paramilitary 2 Ryan Sallee/KnifeWorks Hot Pink Duracoat G10 CPM-S30V (originally C81GP2) $OLD!
Putting this one back up for sale at a reduced price. I am the second owner of this knife; I did not modify it further in any way. It has a few very minor blemishes on the Duracoating but is otherwise in great, nearly perfect shape. Never used, factory edge. Duracoated scales have same grippy feel as the standard G10 scales. Contact info for custom knifemaker who Duracoated the scales is included.
All standard BF buying/shipping rules apply. You must be at least 18 years old and it is your responsibility to know and adhere to your local knife carry laws (I will not ship knives to NYC). I only accept PayPal goods/services as payment for these today (no gift option please); PP fees and shipping with full insurance are included in the quoted price. Shipping will be USPS First Rate Priority; knives will not be shipped until full payment is received. First Ill take it in this thread followed by an email/PM will make it yours. I am not interested in any trades at this time and no international sales (sorry!); all sales are final. Thanks for looking!
BNIB Manix 2 Coarse Black G10 CPM-S110V (skeletonized liners!) $OLD!
Heres one you dont see everyday! This knife was carefully constructed myself using a BNIB BD30P sprint run Manix 2, for its coarser G10 texture (better, more grippy than standard Spyderco G10) and skeletonized liners (so its solid yet very light), and a S110V blade retrieved from a BNIB lightweight Manix 2. The action is very smooth and clean, lockup is perfect, and the blade centering is only a bit off to the clip side (see pic; it likely could be adjusted to 100% dead center, but I didnt want to fiddle with it too much). Comes with original box/papers for the lightweight S110V Manix 2. It is completely unused, and was in fact only born yesterday; the price Im asking is $100 less than what it cost me to purchase the two knives separately.
BNIB Schempp Bowie Carbon Fiber CPM-S30V (C190CFP) $OLD!
This is a catch and release for me. This is a really beautiful knife, lovely brass bolsters, and a wicked sharp edge, but I just did not dig the handle ergos. It was opened about 4-5 times and admired, and then put back in its baggie/box. Comes with original box/papers.
BNIB Manix 2 Black G10 CPM-S30V DLC Hollow Ground Partially Serrated (C101GPSBBK2) $OLD!
NIB Lightweight Native 5 Black FRCP CPM-S35VN (C41PBK5) $OLD!
This knife was born a serrated lightweight Native 5, but I swapped the serrated blade into a BNIB G10 Native 5 and put its PE blade into this lightweight frame. Both blades have DOB stamps of April 2015 on them (I have a thread discussing this swap on the Spyderco forum right now). It is 100% functional, and I doubt Spyderco themselves would notice that it wasnt one straight out of their Golden factory. Completely unused, lockup and centering are dead on, with original scary sharp factory edge. Comes with original box/papers for the SE version.
BNIB Centofante 3 Black FRN VG-10 (C66PBK3) $OLD!
This is a BNIB unused Cento 3 I purchased from Amazon last winter. It has small blemishes on the handle near the Spyder bug inlay where some glue seeped up onto the scale, and it looks like someone tried to lightly scratch it off (see pic). Im past my available time window of returning it to Amazon, so Im hoping it will now find a good home where someone will use it hard like Sal intended! Very sharp 2.5 mm VG-10 blade with unused factory edge (this baby is superior to the Delica in many ways IMHO). Original box; it didnt come with papers.
NIB Paramilitary 2 Ryan Sallee/KnifeWorks Hot Pink Duracoat G10 CPM-S30V (originally C81GP2) $OLD!
Putting this one back up for sale at a reduced price. I am the second owner of this knife; I did not modify it further in any way. It has a few very minor blemishes on the Duracoating but is otherwise in great, nearly perfect shape. Never used, factory edge. Duracoated scales have same grippy feel as the standard G10 scales. Contact info for custom knifemaker who Duracoated the scales is included.
All standard BF buying/shipping rules apply. You must be at least 18 years old and it is your responsibility to know and adhere to your local knife carry laws (I will not ship knives to NYC). I only accept PayPal goods/services as payment for these today (no gift option please); PP fees and shipping with full insurance are included in the quoted price. Shipping will be USPS First Rate Priority; knives will not be shipped until full payment is received. First Ill take it in this thread followed by an email/PM will make it yours. I am not interested in any trades at this time and no international sales (sorry!); all sales are final. Thanks for looking!
Last edited:
