Cutting out a few to make room...
These are all from my personal collection, but should go to new folks who will use them.
I HAVE A LOT MORE KNIVES THAN RELATIVES TO GIVE THEM TO. NO THANKS, I'M NOT ADOPTING ANYONE LATELY.
All are brand new; unused, uncarried.
Return privilege if I have misrepresented anything about the knife.
Certainly, NO TRADES! I hate to sell these. Prices are firm, but good.
PP funds good and services only. I cover fees and shipping TYD;
USPS Priority insured flat rate box with tracking.
First “I’ll take it” in this thread …
------------------
$125.00
Big Chris:
nice, grippy handle, thin blade, super slicer. KEPHART BLADE DESIGN
Specs:
3/32" O1 @ 60-61 Rc
8.5" OAL
4.125" Tip to Scales
1.188" Wide
Zero Convex Grind
Stropped Micro Bevel
Green Canvas Micarta Scales Left Rough For Added Traction
Aluminum Pins and Tube
---------------------
Bill Akers (BackWoods Knives):
“Insane” Backwoods EDC …
$155.00
knife and sheath made by Bill Akers of Backwoods Knives …
Beautiful little knife, nice in the hand and if you know Bill’s work, you know the fit and finish are second to none.
“Insane” Maple Burl handles, Mosaic center pin; the steel is Aldo's 1095.
3-1/4” blade, 7-1/2” overall, full flat grind and sharp! Blade thickness 0.158"
-----------
Bill Akers (RAINDROP Damascus beauty) $185.00
BACKWOODS BLADES
3.020" tip to grip; blade thickness: 0.158"
4 1/4" grip length
Here are some pics of the blade profile, spine, etc. Please click on the BLUE link...next line down.
http://s246.photobucket.com/user/So...ckWoods damascus/the short BackWoods damascus
bottom knife only... (top is gone)
-------------------------------------------
GL Drew: $120.00
easy to carry; excellent workmanship, nice jimping.
An easy-carry knife to carry with scabbard that can be worn left or right. The attached the belt loop is flat against the back of the scabbard so the knife can be carried easily in a day pack or in the back pocket.
Stock removal from 3/32 inch 52100 steel. Miked blade thickness is 0.106". (This is a sturdy blade. I'm keeping one just like it, but in a different grip material.)
Flat grind finished with a belt polish
bloodwood handles
Overall length: 7 inches
Blade: 3 inches
Leather scabbard with belt loop
These are all from my personal collection, but should go to new folks who will use them.
I HAVE A LOT MORE KNIVES THAN RELATIVES TO GIVE THEM TO. NO THANKS, I'M NOT ADOPTING ANYONE LATELY.
All are brand new; unused, uncarried.
Return privilege if I have misrepresented anything about the knife.
Certainly, NO TRADES! I hate to sell these. Prices are firm, but good.
PP funds good and services only. I cover fees and shipping TYD;
USPS Priority insured flat rate box with tracking.
First “I’ll take it” in this thread …
------------------
$125.00
Big Chris:
nice, grippy handle, thin blade, super slicer. KEPHART BLADE DESIGN
Specs:
3/32" O1 @ 60-61 Rc
8.5" OAL
4.125" Tip to Scales
1.188" Wide
Zero Convex Grind
Stropped Micro Bevel
Green Canvas Micarta Scales Left Rough For Added Traction
Aluminum Pins and Tube
---------------------
Bill Akers (BackWoods Knives):
“Insane” Backwoods EDC …
$155.00
knife and sheath made by Bill Akers of Backwoods Knives …
Beautiful little knife, nice in the hand and if you know Bill’s work, you know the fit and finish are second to none.
“Insane” Maple Burl handles, Mosaic center pin; the steel is Aldo's 1095.
3-1/4” blade, 7-1/2” overall, full flat grind and sharp! Blade thickness 0.158"
-----------
Bill Akers (RAINDROP Damascus beauty) $185.00
BACKWOODS BLADES
3.020" tip to grip; blade thickness: 0.158"
4 1/4" grip length
Here are some pics of the blade profile, spine, etc. Please click on the BLUE link...next line down.
http://s246.photobucket.com/user/So...ckWoods damascus/the short BackWoods damascus
bottom knife only... (top is gone)
-------------------------------------------
GL Drew: $120.00
easy to carry; excellent workmanship, nice jimping.
An easy-carry knife to carry with scabbard that can be worn left or right. The attached the belt loop is flat against the back of the scabbard so the knife can be carried easily in a day pack or in the back pocket.
Stock removal from 3/32 inch 52100 steel. Miked blade thickness is 0.106". (This is a sturdy blade. I'm keeping one just like it, but in a different grip material.)
Flat grind finished with a belt polish
bloodwood handles
Overall length: 7 inches
Blade: 3 inches
Leather scabbard with belt loop
Last edited:
