PeteyTwoPointOne
Platinum Member
- Joined
- Jun 10, 2014
- Messages
- 8,070
For Sale:
PLEASE do not post comments or questions in the sales thread,
PM or email me for those type of things, THANK YOU!!!
1. Kizer Zipslip, Michael Vagnino Design, Ki3507 ...
*Like new, factory edge, no marks
*comes with full kit, nice presentation box, outer box, camo zipper pouch
*very smooth functioning slipjoint with sweet half-stop
*pictures speak for themselves, but questions via PM welcomed
*specs:
Overall Length: 6.83"
Blade Length: 2.84"
Cutting Edge: 2.50"
Blade Width: 0.875"
Blade Thickness: 0.12"
Blade Material:CPM-S35VN
Blade Style: Drop Point
Blade Grind: Flat
Finish: Stonewash
PRICE: SOLD $79 <all in, PayPal Goods & Services, no surprise fees>
2. Spyderco Gayle Bradley 1 !SOLID LINERS! with Custom Bocote Scales ...
*unused, original owner
*a couple very light pre-patina staining spots near the blade tip on both sides I tried to capture in pics...may be able to polish out, ymmv.
*SOLID LINERS >>> these blades were allegedly run harder Rc than those that came after. Google it! And they've become rare as hen's teeth in the wild. This is my last and I'm putting it on the Ex. because I don't have the heart to use it and I don't want it to patina any further if there's collector interest.
*Classy
Custom Bocote scales, drilled for TipUp/RH carry...*NOTE-- the factory screws will not catch the threads because these scales are a bit thicker than the factory scales. If you're handy, you can make them work with the factory clip, no doubt!
*factory CF/G10 laminate scales, pocket clip, lanyard tube, & screws included.
*factory box included
PRICE: $395 <all in, PayPal Goods & Services, no surprise fees>
3. Cold Steel Hold Out 1 11XHL...
*Like new, unused
*Comes with factory box & bubble wrap
*Tri-AD lock, rock solid!
*feels great in hand, amazing really, imho.
*G10 appears a bit dry from storage/non-use...I can sparingly dab on a bit of mineral oil if you wish before shipping to bring them back to glory.
*specs:
Blade Length: 6"
Blade Thickness: 3.8 mm
Overall Length: 13 3/16"
Steel: Japanese AUS 8A Stainless
Weight: 7.7 oz.
Handle: 7 3/16" Long. G-10
Pocket Clip: Stainless Pocket / Belt Clip Made in Taiwan
PRICE: $175 <all in, PayPal Goods & Services, no surprise fees>
4. Spyderco Nilakka C164GPBN ...
*used, touched up on Sharpmaker UF rods
*factory box & pocket clip included...looks like previous owner tried to anodize it...didn't do a great job, imho. I took it off because I didn't like it anyways.
*blade steel = CPM S30V
*I used it to open parcels, has a few marks on blade faces, no edge issues, but I did drop it on my garage floor and dinged the g10 a bit near the pommel <pictured>...no other damage suffered.
Designer: Pekka Tuominen
PRICE: SOLD $165 <all in, PayPal Goods & Services, no surprise fees>
5. Custom Reate T4000, Bharucha design ...
*like new, factory edge
*a couple tiny marks on blade flats, looks like it was that way from factory
*Green Micarta handle inserts
*stunning professional anodizing of the Ti by JDCustoms
*full factory kit included
*specs:
Overall Length: 8.75"
Blade Length: 3.875"
Cutting Edge: 3.50"
Blade Width: 1.50"
Blade Thickness: 0.16"
Blade Material: Bohler M390
Blade Style: Spear Point
Blade Grind: Hollow
Finish: Satin
Ceramic ball bearing pivot
Steel lockbar insert
PRICE: SOLD $229 <all in, PayPal Goods & Services, no surprise fees>
6. Spyderco Brouwer C232GTi ...
*used, but excellent condition, factory edge
*Custom stonewashed titanium show side scale...the finish is superb, but doesn't match the flat grey Spyderco finish on the lock side...didn't matter to me because I really like the custom scale and you can usually only see one side at a time anyways
.
*Custom titanium deep carry clip included, mounted when shipped.
*factory box, forest green G10 show side scale, & pocket clip included.
*blade steel = CPM S30V
*I consider this like a small Sebenza-- Spyderco Style!
PRICE: SOLD $225 <all in, PayPal Goods & Services, no surprise fees>
7. Long Discontinued Cold Steel Large Shinobu Clip Point ...
*A piece of Cold Steel history...I bought this one myself in the mall @ Cutelery World!
*Very light use, above average overall condition
*San Mai III laminated blade
*"VENTURA, CALIF / MADE IN JAPAN" tang stamp
*Soft Kraton <IIRC> grips with no dings or gouges, a little bit of hand schmutz between the crosshatching
*EXCELLENT lockup as is standard on this model! Almost looks seamless along the spine when opened
*ZERO BLADEPLAY in any direction
*a few wisps on the blade faces consistent with light use
*two or three superficial blemishes on the obverse blade face, looks like they may be able to be polished out with some chrome polish...I haven't tried.
*semicircular marks near the blade pivot/tang stamp area from opening/closing
*appears to be factory edge with no defects
*no box, no sheath, knife only
PRICE: $129 <all in, PayPal Goods & Services, no surprise fees>
PAYMENT: PayPal G&S, or USPS MO's
SHIPPING: Priority Mail with Signature Confirmation to your PP addy in the 50 U S of A...no PO boxes & no NYC shipping please! International brothers, PM me, we can work something out.... maybe!
TERMS: Please post an "I'll take it" here in the thread with a follow up PM or email. I reserve the right to end the sale at any time for any reason. I likewise reserve the right to sell to whomever I choose to. No returns, No refunds, No exchanges...so be sure to ask any questions NOW! By purchasing this knife you agree that you are lawfully able to purchase, accept delivery, & use such a knife in accordance with all laws of your jurisdiction.
PICS:
PLEASE do not post comments or questions in the sales thread,
PM or email me for those type of things, THANK YOU!!!
1. Kizer Zipslip, Michael Vagnino Design, Ki3507 ...
*Like new, factory edge, no marks
*comes with full kit, nice presentation box, outer box, camo zipper pouch
*very smooth functioning slipjoint with sweet half-stop
*pictures speak for themselves, but questions via PM welcomed
*specs:
Overall Length: 6.83"
Blade Length: 2.84"
Cutting Edge: 2.50"
Blade Width: 0.875"
Blade Thickness: 0.12"
Blade Material:CPM-S35VN
Blade Style: Drop Point
Blade Grind: Flat
Finish: Stonewash
PRICE: SOLD $79 <all in, PayPal Goods & Services, no surprise fees>
2. Spyderco Gayle Bradley 1 !SOLID LINERS! with Custom Bocote Scales ...
*unused, original owner
*a couple very light pre-patina staining spots near the blade tip on both sides I tried to capture in pics...may be able to polish out, ymmv.
*SOLID LINERS >>> these blades were allegedly run harder Rc than those that came after. Google it! And they've become rare as hen's teeth in the wild. This is my last and I'm putting it on the Ex. because I don't have the heart to use it and I don't want it to patina any further if there's collector interest.
*Classy
Custom Bocote scales, drilled for TipUp/RH carry...*NOTE-- the factory screws will not catch the threads because these scales are a bit thicker than the factory scales. If you're handy, you can make them work with the factory clip, no doubt!*factory CF/G10 laminate scales, pocket clip, lanyard tube, & screws included.
*factory box included
PRICE: $395 <all in, PayPal Goods & Services, no surprise fees>
3. Cold Steel Hold Out 1 11XHL...
*Like new, unused
*Comes with factory box & bubble wrap
*Tri-AD lock, rock solid!
*feels great in hand, amazing really, imho.
*G10 appears a bit dry from storage/non-use...I can sparingly dab on a bit of mineral oil if you wish before shipping to bring them back to glory.
*specs:
Blade Length: 6"
Blade Thickness: 3.8 mm
Overall Length: 13 3/16"
Steel: Japanese AUS 8A Stainless
Weight: 7.7 oz.
Handle: 7 3/16" Long. G-10
Pocket Clip: Stainless Pocket / Belt Clip Made in Taiwan
PRICE: $175 <all in, PayPal Goods & Services, no surprise fees>
4. Spyderco Nilakka C164GPBN ...
*used, touched up on Sharpmaker UF rods
*factory box & pocket clip included...looks like previous owner tried to anodize it...didn't do a great job, imho. I took it off because I didn't like it anyways.
*blade steel = CPM S30V
*I used it to open parcels, has a few marks on blade faces, no edge issues, but I did drop it on my garage floor and dinged the g10 a bit near the pommel <pictured>...no other damage suffered.
Designer: Pekka Tuominen
PRICE: SOLD $165 <all in, PayPal Goods & Services, no surprise fees>
5. Custom Reate T4000, Bharucha design ...
*like new, factory edge
*a couple tiny marks on blade flats, looks like it was that way from factory
*Green Micarta handle inserts
*stunning professional anodizing of the Ti by JDCustoms
*full factory kit included
*specs:
Overall Length: 8.75"
Blade Length: 3.875"
Cutting Edge: 3.50"
Blade Width: 1.50"
Blade Thickness: 0.16"
Blade Material: Bohler M390
Blade Style: Spear Point
Blade Grind: Hollow
Finish: Satin
Ceramic ball bearing pivot
Steel lockbar insert
PRICE: SOLD $229 <all in, PayPal Goods & Services, no surprise fees>
6. Spyderco Brouwer C232GTi ...
*used, but excellent condition, factory edge
*Custom stonewashed titanium show side scale...the finish is superb, but doesn't match the flat grey Spyderco finish on the lock side...didn't matter to me because I really like the custom scale and you can usually only see one side at a time anyways
.*Custom titanium deep carry clip included, mounted when shipped.
*factory box, forest green G10 show side scale, & pocket clip included.
*blade steel = CPM S30V
*I consider this like a small Sebenza-- Spyderco Style!
PRICE: SOLD $225 <all in, PayPal Goods & Services, no surprise fees>
7. Long Discontinued Cold Steel Large Shinobu Clip Point ...
*A piece of Cold Steel history...I bought this one myself in the mall @ Cutelery World!
*Very light use, above average overall condition
*San Mai III laminated blade
*"VENTURA, CALIF / MADE IN JAPAN" tang stamp
*Soft Kraton <IIRC> grips with no dings or gouges, a little bit of hand schmutz between the crosshatching
*EXCELLENT lockup as is standard on this model! Almost looks seamless along the spine when opened
*ZERO BLADEPLAY in any direction
*a few wisps on the blade faces consistent with light use
*two or three superficial blemishes on the obverse blade face, looks like they may be able to be polished out with some chrome polish...I haven't tried.
*semicircular marks near the blade pivot/tang stamp area from opening/closing
*appears to be factory edge with no defects
*no box, no sheath, knife only
PRICE: $129 <all in, PayPal Goods & Services, no surprise fees>
PAYMENT: PayPal G&S, or USPS MO's
SHIPPING: Priority Mail with Signature Confirmation to your PP addy in the 50 U S of A...no PO boxes & no NYC shipping please! International brothers, PM me, we can work something out.... maybe!
TERMS: Please post an "I'll take it" here in the thread with a follow up PM or email. I reserve the right to end the sale at any time for any reason. I likewise reserve the right to sell to whomever I choose to. No returns, No refunds, No exchanges...so be sure to ask any questions NOW! By purchasing this knife you agree that you are lawfully able to purchase, accept delivery, & use such a knife in accordance with all laws of your jurisdiction.
PICS:
Last edited:
