- Joined
- Aug 31, 2011
- Messages
- 3,119
Handle is 3 3/4". Great knife for a smaller hand. Slices cleanly and effortlessly like a laser.
Steel: AEB-L
Handle: stainless pins, G-Flex, Honduran Rosewood. Finished with hot wax.
Heat Treat: Paul Bos for 61RC
Blade length: 3"
Thickness: .078" minus a smidge from sanding.
OAL: 6 3/4"
Knife weight: 2.5 oz (70 grams)
Total weight, knife and sheath: 5 oz (140 grams)
Sheath - 8/9 oz. leather, made by usaknifemaker in Mankato MN. Dyed and sealed with Sno Seal by me. Burned a little when I left it on the radiator. Not perfect, but useable.
[21 Feb 2017] Since these pictures were taken, I have re-sanded the left side bevel, so those scratches out near the tip, just above the secondary bevel, are not as prominent. I also cleaned the wax out of the thong hole.
Asking $50 (was $60) (was $70), which includes Priority shipping to USA. No other destinations, please. First "I'll take it" gets it.
Steel: AEB-L
Handle: stainless pins, G-Flex, Honduran Rosewood. Finished with hot wax.
Heat Treat: Paul Bos for 61RC
Blade length: 3"
Thickness: .078" minus a smidge from sanding.
OAL: 6 3/4"
Knife weight: 2.5 oz (70 grams)
Total weight, knife and sheath: 5 oz (140 grams)
Sheath - 8/9 oz. leather, made by usaknifemaker in Mankato MN. Dyed and sealed with Sno Seal by me. Burned a little when I left it on the radiator. Not perfect, but useable.
[21 Feb 2017] Since these pictures were taken, I have re-sanded the left side bevel, so those scratches out near the tip, just above the secondary bevel, are not as prominent. I also cleaned the wax out of the thong hole.
Asking $50 (was $60) (was $70), which includes Priority shipping to USA. No other destinations, please. First "I'll take it" gets it.
Last edited:
