If you want a knife that is Mil-Spec tough then check out these Strider Knives fixed blades we just got in. The MK1C is a straight forward, clip point blade design that is elegant in its simplicity and shines through in the small details. The handles are the standard Strider design and fill the hand well. The 5/32" CPM S30V blades are tough but excellent slicers thanks to the hollow grind. Two feature the aggressive Gunner Grip G10 handle scales and Ghost Stripe finish on the blades the other is contoured, CC G10 with a stonewash finish for a more subdued package.
We also have some MK-1 Mod 10s (scaled down MK-1). This is a slightly beefier fixed blade with deep finger choils forward and aft of the front guard. The choils and some course jimping on the spine allow for finer work than you would expect from a tank-like fixed blade making this an excellent choice for field craft as well as combative work. These are also hollow ground CPM S30V and have the same configurations as the MK1C: Ghost Stripe and Gunner Grip G10 or Stonewash and CC G10. Check out these and other knives from Strider (including the SMF) at GPKnives.com
We also have some MK-1 Mod 10s (scaled down MK-1). This is a slightly beefier fixed blade with deep finger choils forward and aft of the front guard. The choils and some course jimping on the spine allow for finer work than you would expect from a tank-like fixed blade making this an excellent choice for field craft as well as combative work. These are also hollow ground CPM S30V and have the same configurations as the MK1C: Ghost Stripe and Gunner Grip G10 or Stonewash and CC G10. Check out these and other knives from Strider (including the SMF) at GPKnives.com