Thank you very much for taking the time to look at my post.
You are welcome to text, email or call.
William Chu, aka 10after10
Tel: (77 three) 25 five - 044 four
email: pagoda1970s AT gmail DOT com (not PayPal email)
***PLEASE! read Terms & Conditions***
- Available until I indicate "SOLD".
- "PM'd you", "emailed you", "smoke signaled you", "I will take it depending on ......" does NOT constitute a sale.
- Please ask ALL questions before committing to buy.
- Item will be sold to FIRST PERSON TO ACTUALLY REACH ME with unconditional "I will take it". Texting is fastest.
- I will confirm sale by providing you with payment instructions.
- PLEASE BE PREPARED TO PAY IMMEDIATELY after claiming a knife/item. I do NOT "hold" knives/items.
- If your name is not on PayPal account or you want me to ship to address different than on PayPal account, CONTACT ME FIRST.
- I offer return, less shipping, ONLY if knife is not accurately described in post and pics. No exceptions.
- International Buyers are Welcome, please ask about Terms & Conditions. If your PayPal account is based outside of USA, please contact me before committing to buy.
***REGARDING TRADES***
Willing to consider any potential trades, up or down. Sorry, but I cannot reply to generic "any interest in (fill in the blank)?" because I have no idea unless I know condition of your trade & SPECIFIC trade proposal. Please provide full description including applicable details such as blade centering, blade play, lock stick, whether or not knife has been used, carried or sharpened and if box & papers are included.
--------------------------------------------------------------------------------------------------------------------------------------------------
1. Microtech UTX-70, Flat Body
20201012_140207 by William Chu, on Flickr
20201012_140301 by William Chu, on Flickr
Additional Pics:
https://www.flickr.com/photos/184991951@N03/albums/72157716810482302
Manufactured in 12/2013. This is an old school "flat body", previous generation MT UTX-70 that is sought after by collectors. The aluminum body is not contoured like current generation. Also, the body screws are the older "3 hole" type instead of current Tri Wing style. Lastly, there isn't an "attitude adjuster" (glass breaker) on the end although the lanyard extension could serve the same purpose. Good to very good overall condition. This knife has been used and carried but never abused. Has been well maintained. Still has the original MT factory edge, never resharpened. The satin finish Elmax blade has some scratches mostly on clip side, but nothing deep and certainly nothing that affects functionality. No nicks, chips or rolls on edge. The black aluminum body shows some wear, primarily around the corners where it's most susceptible. The rest of the body shows minimal wear for a 7 year old knife. Smooth to open and close. Knife ONLY, no box/papers. If mint, the price of this knife would be significantly higher as all "old school" MT's are going up in value.
Overall length 5.25"
Blade length 2.4"
Weight 1.2 oz
$190 delivered, Venmo or Zelle.
$197 delivered, PayPal Good & Services.
Do NOT commit to buy unless you have carefully read terms & conditions, especially if you are new to Blade Forums. Before offering TRADES, read above.
2. Microtech LUDT
20201029_125849 by William Chu, on Flickr
20201029_125909 by William Chu, on Flickr RPEGS
Additional Pics:
https://www.flickr.com/photos/184991951@N03/albums/72157716806297601
2018 Microtech LUDT. Excellent overall condition. M390 blade is perfectly centered and looks new. No blade play. No nicks, chips or rolls on sharp original MT edge. Dark OD green aluminum scales are in excellent condition with the absolute minimal signs of wear. Even if you look hard, you may not see it. Pocket clip has a few light scratches as can be seen in pic. All proprietary MT screws are in perfect shape, nothing damaged or stripped. Excellent snappy action. Knife ONLY, no box and papers. Sold out everywhere from what I can tell.
Overall length 8"
Blade length 3.4"
Weight 3.6 oz
SOLD, thank you
JBK Ranger
and as always thanks Blade Forums.
*****Also For Sale*****
- Microtech UTX 85 -
https://bladeforums.com/threads/microtech-bounty-hunter-microtech-utx-85.1757153/
You are welcome to text, email or call.
William Chu, aka 10after10
Tel: (77 three) 25 five - 044 four
email: pagoda1970s AT gmail DOT com (not PayPal email)
***PLEASE! read Terms & Conditions***
- Available until I indicate "SOLD".
- "PM'd you", "emailed you", "smoke signaled you", "I will take it depending on ......" does NOT constitute a sale.
- Please ask ALL questions before committing to buy.
- Item will be sold to FIRST PERSON TO ACTUALLY REACH ME with unconditional "I will take it". Texting is fastest.
- I will confirm sale by providing you with payment instructions.
- PLEASE BE PREPARED TO PAY IMMEDIATELY after claiming a knife/item. I do NOT "hold" knives/items.
- If your name is not on PayPal account or you want me to ship to address different than on PayPal account, CONTACT ME FIRST.
- I offer return, less shipping, ONLY if knife is not accurately described in post and pics. No exceptions.
- International Buyers are Welcome, please ask about Terms & Conditions. If your PayPal account is based outside of USA, please contact me before committing to buy.
***REGARDING TRADES***
Willing to consider any potential trades, up or down. Sorry, but I cannot reply to generic "any interest in (fill in the blank)?" because I have no idea unless I know condition of your trade & SPECIFIC trade proposal. Please provide full description including applicable details such as blade centering, blade play, lock stick, whether or not knife has been used, carried or sharpened and if box & papers are included.
--------------------------------------------------------------------------------------------------------------------------------------------------
1. Microtech UTX-70, Flat Body
20201012_140207 by William Chu, on Flickr20201012_140301 by William Chu, on FlickrAdditional Pics:
https://www.flickr.com/photos/184991951@N03/albums/72157716810482302
Manufactured in 12/2013. This is an old school "flat body", previous generation MT UTX-70 that is sought after by collectors. The aluminum body is not contoured like current generation. Also, the body screws are the older "3 hole" type instead of current Tri Wing style. Lastly, there isn't an "attitude adjuster" (glass breaker) on the end although the lanyard extension could serve the same purpose. Good to very good overall condition. This knife has been used and carried but never abused. Has been well maintained. Still has the original MT factory edge, never resharpened. The satin finish Elmax blade has some scratches mostly on clip side, but nothing deep and certainly nothing that affects functionality. No nicks, chips or rolls on edge. The black aluminum body shows some wear, primarily around the corners where it's most susceptible. The rest of the body shows minimal wear for a 7 year old knife. Smooth to open and close. Knife ONLY, no box/papers. If mint, the price of this knife would be significantly higher as all "old school" MT's are going up in value.
Overall length 5.25"
Blade length 2.4"
Weight 1.2 oz
$190 delivered, Venmo or Zelle.
$197 delivered, PayPal Good & Services.
Do NOT commit to buy unless you have carefully read terms & conditions, especially if you are new to Blade Forums. Before offering TRADES, read above.
2. Microtech LUDT
20201029_125849 by William Chu, on Flickr20201029_125909 by William Chu, on Flickr RPEGSAdditional Pics:
https://www.flickr.com/photos/184991951@N03/albums/72157716806297601
2018 Microtech LUDT. Excellent overall condition. M390 blade is perfectly centered and looks new. No blade play. No nicks, chips or rolls on sharp original MT edge. Dark OD green aluminum scales are in excellent condition with the absolute minimal signs of wear. Even if you look hard, you may not see it. Pocket clip has a few light scratches as can be seen in pic. All proprietary MT screws are in perfect shape, nothing damaged or stripped. Excellent snappy action. Knife ONLY, no box and papers. Sold out everywhere from what I can tell.
Overall length 8"
Blade length 3.4"
Weight 3.6 oz
SOLD, thank you
JBK Ranger
and as always thanks Blade Forums.*****Also For Sale*****
- Microtech UTX 85 -
https://bladeforums.com/threads/microtech-bounty-hunter-microtech-utx-85.1757153/
Last edited:
