BogdanS
Knifemaker / Craftsman / Service Provider
- Joined
- Jan 11, 2015
- Messages
- 936
Hello dear friends,
With God's good will today i present you very special MH 'Nebula' - a solid full size titanium frame lock with an impressive, luxurious look.
Built around a titanium 'core' this folder is a gorgeous cutter.
An aluminium/vanadium alloy, Grade 5 TA6V titanium offers an excellent compromise between mechanical strength, toughness and ductility hence it was the choice for the frame of the folder.
The detent ball is high quality ceramic for an ever lasting smooth action without deformations.
All screws are precision machined black oxidized steel, the stop and pivot pins are hardened, precision ground 400c stainless steel so no wear in there even after prolonged years of use.
The blade slides on phosphorous bronze washers with 'grease pockets'.
The blade is made using the high carbon W2 tool steel at 63 hrc (beware it is not rustproof but you know me - i am the carbon steel guy
), with a high flat grind, clay hardened and a hand finished mirror polished and etched that shows a gorgeous hamon. The blade comes razor sharp and is correctly centered.
MH 'Nebula' features on short:
- Grade 5 TA6V titanium scales - one off, custom 'Nebula' finish with milled bolster pocket (one side) and cross cut carbon fiber bolster inlay.
- very light and very strong.
- W2 tool steel, 63 hrc, with a high flat grind, clay hardened and a hand finished mirror polished and etched that shows a gorgeous hamon.
- phosphorous bronze washers with 'grease pockets'.
- screws are precision machined black oxidized steel, the stop and pivot pins are hardened, precision ground 400c stainless steel.
- pivot has 'Titanium' finish aluminum countersunk washers.
- custom home made heat colored, stainless steel thumb stud.
OAL - 7.87", Blade - 3.55"
The price for this luxury MH 'Nebula' is - 375 usd (express shipping included). A custom solid carbon fiber milled 'tip up' pocket clip can be added for 35 usd.
All the best, God bless,
Bogdan
With God's good will today i present you very special MH 'Nebula' - a solid full size titanium frame lock with an impressive, luxurious look.
Built around a titanium 'core' this folder is a gorgeous cutter.
An aluminium/vanadium alloy, Grade 5 TA6V titanium offers an excellent compromise between mechanical strength, toughness and ductility hence it was the choice for the frame of the folder.
The detent ball is high quality ceramic for an ever lasting smooth action without deformations.
All screws are precision machined black oxidized steel, the stop and pivot pins are hardened, precision ground 400c stainless steel so no wear in there even after prolonged years of use.
The blade slides on phosphorous bronze washers with 'grease pockets'.
The blade is made using the high carbon W2 tool steel at 63 hrc (beware it is not rustproof but you know me - i am the carbon steel guy
), with a high flat grind, clay hardened and a hand finished mirror polished and etched that shows a gorgeous hamon. The blade comes razor sharp and is correctly centered.MH 'Nebula' features on short:
- Grade 5 TA6V titanium scales - one off, custom 'Nebula' finish with milled bolster pocket (one side) and cross cut carbon fiber bolster inlay.
- very light and very strong.
- W2 tool steel, 63 hrc, with a high flat grind, clay hardened and a hand finished mirror polished and etched that shows a gorgeous hamon.
- phosphorous bronze washers with 'grease pockets'.
- screws are precision machined black oxidized steel, the stop and pivot pins are hardened, precision ground 400c stainless steel.
- pivot has 'Titanium' finish aluminum countersunk washers.
- custom home made heat colored, stainless steel thumb stud.
OAL - 7.87", Blade - 3.55"
The price for this luxury MH 'Nebula' is - 375 usd (express shipping included). A custom solid carbon fiber milled 'tip up' pocket clip can be added for 35 usd.
All the best, God bless,
Bogdan
