- Joined
- Aug 17, 2014
- Messages
- 4,914
A few need to go quickly to pull together some funds for another piece, so these are priced low to go! Get em while you can! Once I get the funds needed, I plan to withdraw whatever knives haven't sold, so these will not all remain available in all likelihood.
Here's what we've got:
Cold Steel Code 4: NIB, only taken out for pics. This is one of the now unavailble CTS XHP versions. Opens smoothly, factory edge is razor sharp.
Massdrop/Laconico Keen: Carried a few times, sharpened carefully by me on the Wicked Edge at 16 degrees per side, hair popping sharp. Centered blade, rock solid lockup, free and smooth action, great detent. Some snail trails from carry. Comes with box and paperwork.
Boos Blades Smoke TM1: Carried for two weeks and then sharpened on the Wicked Edge at 17 degrees per side, hair popping sharp. Centered blade, rock solid lockup, free and smooth action, detent is tuned just right for front flipping and deploying via middle finger flick. Some scratches on the pocket clip, as pictured below. Comes with box and paperwork.
ZT 0450:Carried a couple of times by me, possibly more by previous owner. I resharpeneded it, matching the factory bevel on the Wicked Edge, it too is hair popping sharp. Comes with milled titanium MXG gear clip ($45 from MXG) and original clip, as pictured, not splitting these up. No box on this one, though. Centered blade, rock solid lockup, free and smooth action, super snappy detent.
Benchmade 485 Valet: Carried twice by me, but shows no signs of wear. Edge is razor sharp from the factory. Blade favors the clip side by a hair, but is nowhere near rubbing. Smooth action and rock solid lockup. Comes with box and paper work.
Benchmade 484 Nakamura: Carried once by me, but previous owner carried it a few times as well, though sings of wear are not apparent. Edge is factory, but I did lightly touch it up on a sharpmaker to bring it back to hair shaving. Blade is perfectly centered and the action is delightfully free dropping. If you muscle it really hard, you can get slight movement, but I would not call it play at all. I have not attempted to adjust the pivot on this one. Comes with box and papers as new. This is also a first production run.
Spyderco Manix 2 (DLT Exlclusive, red G10/20VC steel) : Carried this one only once, though there are some slight marks on the G10 as pictured. Lockup is rock solid and action is drop shut smooth. Centering slightly favors the clip side on this one. Edge is factory and is hair popping sharp. Comes with box and paperwork.
Spyderco Advocate: This one is a user that I have recently sharpened to a hair-popping 18 degree per side edge, with a high polished finish. Excellent flipping action, centered blade. This is the updated CQI edition with the improved bearings from Spyderco. There are some snail trails on this one from use and the lanyard tube has been removed, but is included. Comes with box and papers.
Prices on everything are as follows:
Cold Steel Code 4: $85
Massdrop/Laconico Keen: $OLD
Boos Blades Smoke TM1: $OLD
ZT 0450: $OLD
Benchmade 485 Valet: $OLD
Benchmade 484 Nakamura: $OLD
Spyderco Manix 2 (DLT Exclusive, red G10/20VC steel) : $OLD
Advocate: $OLD
Price is all in via paypal only, and includes shipping and paypal fees if you're more comfortable using Goods and Services. Shipping in CONUS only. NO TRADES, funds need to be recouped, you know how it is.
First I'll take it followed by and email or PM gets it. You can email me at halden.doerge at gmail. Check my feedback and buy with confidence. I stand behind all my knives and, where applicable, sharpening work. If you want additional pics, I am happy to provide them, just email or PM me.
I've tried to include pics of all my sharpening work, where applicable, and any particular wear marks, as noted. Again, if you want more pics, just ask, but an "I'll take it" always takes priority over a pic request.
Thanks in advance, BF!
Here's what we've got:
Cold Steel Code 4: NIB, only taken out for pics. This is one of the now unavailble CTS XHP versions. Opens smoothly, factory edge is razor sharp.
Massdrop/Laconico Keen: Carried a few times, sharpened carefully by me on the Wicked Edge at 16 degrees per side, hair popping sharp. Centered blade, rock solid lockup, free and smooth action, great detent. Some snail trails from carry. Comes with box and paperwork.
Boos Blades Smoke TM1: Carried for two weeks and then sharpened on the Wicked Edge at 17 degrees per side, hair popping sharp. Centered blade, rock solid lockup, free and smooth action, detent is tuned just right for front flipping and deploying via middle finger flick. Some scratches on the pocket clip, as pictured below. Comes with box and paperwork.
ZT 0450:Carried a couple of times by me, possibly more by previous owner. I resharpeneded it, matching the factory bevel on the Wicked Edge, it too is hair popping sharp. Comes with milled titanium MXG gear clip ($45 from MXG) and original clip, as pictured, not splitting these up. No box on this one, though. Centered blade, rock solid lockup, free and smooth action, super snappy detent.
Benchmade 485 Valet: Carried twice by me, but shows no signs of wear. Edge is razor sharp from the factory. Blade favors the clip side by a hair, but is nowhere near rubbing. Smooth action and rock solid lockup. Comes with box and paper work.
Benchmade 484 Nakamura: Carried once by me, but previous owner carried it a few times as well, though sings of wear are not apparent. Edge is factory, but I did lightly touch it up on a sharpmaker to bring it back to hair shaving. Blade is perfectly centered and the action is delightfully free dropping. If you muscle it really hard, you can get slight movement, but I would not call it play at all. I have not attempted to adjust the pivot on this one. Comes with box and papers as new. This is also a first production run.
Spyderco Manix 2 (DLT Exlclusive, red G10/20VC steel) : Carried this one only once, though there are some slight marks on the G10 as pictured. Lockup is rock solid and action is drop shut smooth. Centering slightly favors the clip side on this one. Edge is factory and is hair popping sharp. Comes with box and paperwork.
Spyderco Advocate: This one is a user that I have recently sharpened to a hair-popping 18 degree per side edge, with a high polished finish. Excellent flipping action, centered blade. This is the updated CQI edition with the improved bearings from Spyderco. There are some snail trails on this one from use and the lanyard tube has been removed, but is included. Comes with box and papers.
Prices on everything are as follows:
Cold Steel Code 4: $85
Massdrop/Laconico Keen: $OLD
Boos Blades Smoke TM1: $OLD
ZT 0450: $OLD
Benchmade 485 Valet: $OLD
Benchmade 484 Nakamura: $OLD
Spyderco Manix 2 (DLT Exclusive, red G10/20VC steel) : $OLD
Advocate: $OLD
Price is all in via paypal only, and includes shipping and paypal fees if you're more comfortable using Goods and Services. Shipping in CONUS only. NO TRADES, funds need to be recouped, you know how it is.
First I'll take it followed by and email or PM gets it. You can email me at halden.doerge at gmail. Check my feedback and buy with confidence. I stand behind all my knives and, where applicable, sharpening work. If you want additional pics, I am happy to provide them, just email or PM me.
I've tried to include pics of all my sharpening work, where applicable, and any particular wear marks, as noted. Again, if you want more pics, just ask, but an "I'll take it" always takes priority over a pic request.
Thanks in advance, BF!
Last edited:
