- Joined
- Aug 10, 2012
- Messages
- 6,586
I don't like crotch rockets. I prefer Harley-Davidson.
-
The BladeForums.com 2024 Traditional Knife is available! Price is $250 ea (shipped within CONUS).
Order here: https://www.bladeforums.com/help/2024-traditional/
Order of KAI Official Hang Out; Good Times & Joyous Knives
- Thread starter sticktodrum
- Start date
- Status
- Joined
- Nov 3, 2012
- Messages
- 7,165
If you are going to get a street bike, I strongly suggest (if you haven't already) that you get a dirt bike and learn how to ride at a very competent level before getting a street bike. It may save your life. When you do ride on the street, assume that every car you see is out to kill you, be hyper vigilant.
I think that while driving a car.
- Joined
- Aug 10, 2012
- Messages
- 6,586
Ugh, my Endura is still in Utah.
- Joined
- Apr 16, 2012
- Messages
- 1,655
Today is a good day... I got my drill press! I had to drive an hour north to get it, but its a floor model i got for $150 i couldnt pass that up. I just couldnt pass that up. Its a 3/4 hp motor with a lot of speed options.
Its a little dirty so im gunna spend some time cleaning it up.
Im at a moral cross roads though. I ordered a second 560cbcf so i could flip it... Im having a hard time actually doing it though. I need the extra money to pay for these tools im buying...
Ughhhh... Stupid conscience.
Its a little dirty so im gunna spend some time cleaning it up.
Im at a moral cross roads though. I ordered a second 560cbcf so i could flip it... Im having a hard time actually doing it though. I need the extra money to pay for these tools im buying...
Ughhhh... Stupid conscience.
- Joined
- Dec 29, 2012
- Messages
- 8,032
My recommendation is invest in some high quality drill bits, being a knife guy im sure I don't have to tell you why you need quality cutting tools
- Joined
- Apr 16, 2012
- Messages
- 3,544
Where'd you get another one? I was hoping for a third for the same reason.
Your first one will go out tomorrow by the way. 
- Joined
- Apr 16, 2012
- Messages
- 1,655
Where'd you get another one? I was hoping for a third for the same reason.
I was lucky to find goinggear.com had them in stock. And they were advertising a 10%off coupon for bladeforuns members. So i picked one up for a good price. But now i need the money instead. 600 it is.
JuJu-
Gold Member
- Joined
- Jun 7, 2011
- Messages
- 4,943
Good for you! Is it a bigger one than you were going to get or?
Personally I can see selling it for a profit because you didn't buy it just to flip it, and you could really use the money. I have no problem with that. What I do have a problem with is these people who buy them solely for the purpose to gouge the crap out of everyone and use a stupid excuse or made up sob storry to justify it. That is the annoying part.
Besides it's not like a few people around here haven't ever done it or anything
- Joined
- Apr 16, 2012
- Messages
- 1,655
Good for you! Is it a bigger one than you were going to get or?
Personally I can see selling it for a profit because you didn't buy it just to flip it, and you could really use the money. I have no problem with that. What I do have a problem with is these people who buy them solely for the purpose to gouge the crap out of everyone and use a stupid excuse or made up sob storry to justify it. That is the annoying part.
Besides it's not like a few people around here haven't ever done it or anything
Thanks! Its exactly what i was looking for actually, and about half the price. Im glad you guys wont think of me as scum for jackin the price on my 560. between the $2,000 grinder, and about $600 worth of other tooling and belts etc. I need to buy, im pretty much going broke. I going to be selling a lot of my knives that i dont need anymore too. Learning to make knives takes precedence over having a bunch of knives at the moment. SO be on the look out for some sales. I need these gone.
- Joined
- Apr 16, 2012
- Messages
- 3,544
- Joined
- Apr 16, 2012
- Messages
- 1,655
Would you mind selling me back the one I haven't sent you yet?
HAHAHA... I cant do that to you Mario! I would feel terrible.
JuJu-
Gold Member
- Joined
- Jun 7, 2011
- Messages
- 4,943
Thanks! Its exactly what i was looking for actually, and about half the price. Im glad you guys wont think of me as scum for jackin the price on my 560. between the $2,000 grinder, and about $600 worth of other tooling and belts etc. I need to buy, im pretty much going broke. I going to be selling a lot of my knives that i dont need anymore too. Learning to make knives takes precedence over having a bunch of knives at the moment. SO be on the look out for some sales. I need these gone.
Thats a heck of a deal for a nice drill press, I'd pay that for one all day long!
- Joined
- Jan 7, 2013
- Messages
- 1,580
Beat me to it. I wont have the money for one till the end of the month so I figured af least the folks on here should get all they want.
- Joined
- Aug 10, 2012
- Messages
- 6,586
These are my thoughts exactly about people that flip knives. I don't have a problem with it as long as the money is going towards something else, like what Stebby is doing. And when Stick had to get a new camera and when he got the Wicked Edge.Good for you! Is it a bigger one than you were going to get or?
Personally I can see selling it for a profit because you didn't buy it just to flip it, and you could really use the money. I have no problem with that. What I do have a problem with is these people who buy them solely for the purpose to gouge the crap out of everyone and use a stupid excuse or made up sob storry to justify it. That is the annoying part.
Besides it's not like a few people around here haven't ever done it or anything
I won't think of you as a scum Stebs. I'm looking forward to seeing what you come up. Do you have any idea what you're going to make?
I haven't flip a knife mainly because I don't have the funny to buy one in the first place. But sooner or later I would think that everyone will do it at least once.
- Status