Osage orange

Phillip Patton

Knifemaker / Craftsman / Service Provider
Feedback: +93 / =0 / -0
Joined
Jul 25, 2005
Messages
5,344
Howdy all,
I have a large flat rate box filled with osage orange blocks. Sizes range from 3/4" thick blocks up to 2-1/2" X 2-1/2" X 5-1/2" blocks, with some smaller stuff to fill in the cracks. Total package weight is about 23.5 pounds.

Some of the thicker stuff may not be totally dry, so I sealed the ends. You should check it with a moisture meter before using. It's been drying in my shop for 6 or 7 years, so it's not real wet either.

A few pieces have some cracks or voids you'll have to work around, but most of it's pretty solid.

A couple of the smaller blocks were stabilized with Nelsonite.



I can take paypal, check, or MO. Please send paypal to 2000pjp at gmail dot com
If using a check, allow 10 business days for it to clear before shipment. Please make sure it is still available before sending payment. :)

If anyone wants custom sizes cut, I'd be happy to oblige. Just shoot me an email.

Thanks,
Phillip
 
Last edited:
Well, I wanted some pieces for knife handles/scales which I think your original box has. But I also wanted some longer pieces, about 12" +/- to use for handles for some hammer heads I'm making. Do you have anything osage orange approximately 2" x 2.5" x 12"? Or larger that I can cut down for my use?
 
If I don't have any pieces that size, I can certainly cut them. How many do you need?
 
Back
Top