- Joined
- May 2, 2013
- Messages
- 1,711
All SOLD OUT . Thanks again BF Members!
Ok BF'rs I had a request to do something in Titanium. So here they are. These are UC Last Ditch Dusters, 1/4" Bit Drivers and Bottle Openers. These are based on a design I have previously done called the 'Brewtal Bottle Opener. ' This run is made from 1/4" thick Titanium, 6Al-4V. That are cut as a rough batch via water jet, but all the rest is hand made and hand finished. The hopes are chamfered, finger holes trued, ground and smoothed edges, softened corners and then tumbled and final finished. These are available in Heat Colored, Tumbled Raw or Solid Colored via anodizing. They also have a small stainless split ring to attach easily to a keyring.
They also have a smaller finger hole than some of my earlier dusters, also per customer request. The hole is just under an inch diameter. I wear a size 12 ring, and they're a tight squeeze for me. But they do fit. If you have bigger hands than that let me know and I'll open the hole up a bit.
Otherwise I think pics work better than words...
These are ready to ship, just need a final finish of your choice which takes about an hour each so most get out same or next day. This time the materials were pricey, but I wanted to honor the requests to use Ti. I hope everyone likes it. They're for sale on my site, as well as here. BF'rs always get a discount and a day advance to purchase. Thank you all for supporting my business.
These are SOLD OUT shipped anywhere in the US, a couple of extra bucks get them anywhere in the world provided they're legal. (Non-BF price will be $45 plus shipping.)
As always, email me at
E.Lucy@gmx.com
with a finish preference and an email address to send a PayPal invoice to. Once the invoice is paid, they ship. To keep the cost down I send these in a small padded envelope, no tracking. But I will work with anyone who doesn't receive their order to make it right. I've only ever lost one package shipping this way, and that was a long time ago. But if you want tracking, let me know, it will be $2 extra shipping cost.
They don't come with a hex bit as of yet, but work with any 1/4" drive hex. As always know your local laws, as I can't know them all. Be responsible, safe and courteous. And please don't drink and drive.
I have about 20 of these right now and they are going up for general sale on my site starting tomorrow. As with all my others, once these are gone, they're gone. May see something similar, but I try to keep each new thing different than all the last.
If you post here you want one, or PM me it may take me a little bit to answer. Tapatalk doesn't always alert me. Email gets me right away.
Thanks for your interest!
-Eric
Overmountain Knife and Tool
Ok BF'rs I had a request to do something in Titanium. So here they are. These are UC Last Ditch Dusters, 1/4" Bit Drivers and Bottle Openers. These are based on a design I have previously done called the 'Brewtal Bottle Opener. ' This run is made from 1/4" thick Titanium, 6Al-4V. That are cut as a rough batch via water jet, but all the rest is hand made and hand finished. The hopes are chamfered, finger holes trued, ground and smoothed edges, softened corners and then tumbled and final finished. These are available in Heat Colored, Tumbled Raw or Solid Colored via anodizing. They also have a small stainless split ring to attach easily to a keyring.
They also have a smaller finger hole than some of my earlier dusters, also per customer request. The hole is just under an inch diameter. I wear a size 12 ring, and they're a tight squeeze for me. But they do fit. If you have bigger hands than that let me know and I'll open the hole up a bit.
Otherwise I think pics work better than words...
These are ready to ship, just need a final finish of your choice which takes about an hour each so most get out same or next day. This time the materials were pricey, but I wanted to honor the requests to use Ti. I hope everyone likes it. They're for sale on my site, as well as here. BF'rs always get a discount and a day advance to purchase. Thank you all for supporting my business.
These are SOLD OUT shipped anywhere in the US, a couple of extra bucks get them anywhere in the world provided they're legal. (Non-BF price will be $45 plus shipping.)
As always, email me at
E.Lucy@gmx.com
with a finish preference and an email address to send a PayPal invoice to. Once the invoice is paid, they ship. To keep the cost down I send these in a small padded envelope, no tracking. But I will work with anyone who doesn't receive their order to make it right. I've only ever lost one package shipping this way, and that was a long time ago. But if you want tracking, let me know, it will be $2 extra shipping cost.
They don't come with a hex bit as of yet, but work with any 1/4" drive hex. As always know your local laws, as I can't know them all. Be responsible, safe and courteous. And please don't drink and drive.
I have about 20 of these right now and they are going up for general sale on my site starting tomorrow. As with all my others, once these are gone, they're gone. May see something similar, but I try to keep each new thing different than all the last.
If you post here you want one, or PM me it may take me a little bit to answer. Tapatalk doesn't always alert me. Email gets me right away.
Thanks for your interest!
-Eric
Overmountain Knife and Tool
Last edited:
