- Joined
- Feb 1, 2010
- Messages
- 1,312
SPECS:
Model: Nessmuk Twister
Steel: 1/8" thick 1095 Carbon steel ground and differentially heat treated with an edge hardness approximately 60Rc and a tough softer spine.
Blade: 4.1 inches long from the tip to wrap with dark flat sides and satin steel ground bevels.
Handle: Coyote brown paracrod wrapped on the knifes full tang with glass breaker pommel and 5/32" lanyard hole. The tang is sealed with black paint under the warp to prevent rust.
Overall Length: 8.75 inches with my makers mark on etched into the spine (not seen on the photos)
Sheath: Coyote brown Kydex with the top three holes drilled to accept a large Tek Loc.
Price: $50 plus $7 shipping
I prefer PayPay (account is kelley_ward@keysight.com Note: there are 2 "e"s in kelley) but I accept other forms of payment.
Model: Tanto Twister
Steel: 1/8" thick 1095 Carbon steel ground and differentially heat treated with an edge hardness approximately 60Rc and a tough softer spine.
Blade: 5.1 inches long from the tip to wrap with dark flat sides and satin steel ground bevels.
Handle: Coyote brown paracrod wrapped on the knifes full tang with glass breaker pommel and 5/32" lanyard hole. The tang is sealed with black paint under the warp to prevent rust.
Overall Length: 9.5 inches with my makers mark on etched into the spine (not seen on the photos)
Sheath: Coyote brown Kydex with the top three holes drilled to accept a large Tek Loc.
SOLD: $50 plus $7 shipping
I prefer PayPay (account is kelley_ward@keysight.com Note: there are 2 "e"s in kelley) but I accept other forms of payment.
Model: Nessmuk Twister
Steel: 1/8" thick 1095 Carbon steel ground and differentially heat treated with an edge hardness approximately 60Rc and a tough softer spine.
Blade: 4.1 inches long from the tip to wrap with dark flat sides and satin steel ground bevels.
Handle: Coyote brown paracrod wrapped on the knifes full tang with glass breaker pommel and 5/32" lanyard hole. The tang is sealed with black paint under the warp to prevent rust.
Overall Length: 8.75 inches with my makers mark on etched into the spine (not seen on the photos)
Sheath: Coyote brown Kydex with the top three holes drilled to accept a large Tek Loc.
Price: $50 plus $7 shipping
I prefer PayPay (account is kelley_ward@keysight.com Note: there are 2 "e"s in kelley) but I accept other forms of payment.
Model: Tanto Twister
Steel: 1/8" thick 1095 Carbon steel ground and differentially heat treated with an edge hardness approximately 60Rc and a tough softer spine.
Blade: 5.1 inches long from the tip to wrap with dark flat sides and satin steel ground bevels.
Handle: Coyote brown paracrod wrapped on the knifes full tang with glass breaker pommel and 5/32" lanyard hole. The tang is sealed with black paint under the warp to prevent rust.
Overall Length: 9.5 inches with my makers mark on etched into the spine (not seen on the photos)
Sheath: Coyote brown Kydex with the top three holes drilled to accept a large Tek Loc.
SOLD: $50 plus $7 shipping
I prefer PayPay (account is kelley_ward@keysight.com Note: there are 2 "e"s in kelley) but I accept other forms of payment.
Last edited:
