Paramilitary 2 Custom Blades in CPM Rex 121 and S125V

Status
Not open for further replies.
Feedback: +92 / =0 / -0
Joined
Jun 20, 2010
Messages
432
Selling two custom blades for Paramilitary 2:
1. Blax oxide blade in CPM Rex 121 double quenched at 70 HRC, unsharpened. Test fitted on two different Para 2s: no blade play, silid lockup at about 40% engagement, perfectly centered.

2. Stonewashed blade in CPM S125 double quenched at 64 hrc, unsharpened. Test fitted on two different Para 2s: no blade play, silid lockup at 40% engagement, perfectly centered.

Both blades was made by Vlad Dzhola from Ukraine and feature his sterling silver trademark inlay with "VD" initials.
The blades are about 0.25 inch longer than a stock blade and purposefully made without jimpings, without a choil to maximize cutting edge (cutting edge is longer that one of a stock Military) and a smaller spyderhole for more lateral strength. Thickness behind the edge is about half of what's on stock Para 2 blade. Blades are sterile and have sterling silver inlays with bladesmith initials as stated above. Lockup is rock solid, detent works perfect, blades are perfectly centered. Attached is a picture of the blades and at their birth.

REX 121 is sold. S125V is available for $170 shipped.
 

Attachments

  • 20230904_144948.jpg
    20230904_144948.jpg
    939.4 KB · Views: 10
  • 20230904_144940.jpg
    20230904_144940.jpg
    1.1 MB · Views: 10
  • 20230904_144827.jpg
    20230904_144827.jpg
    1.2 MB · Views: 10
  • 20230904_144819.jpg
    20230904_144819.jpg
    899.5 KB · Views: 14
  • InkedPara 2 s125v_LI.jpg
    InkedPara 2 s125v_LI.jpg
    686.5 KB · Views: 13
Last edited:
Status
Not open for further replies.
Back
Top