- Joined
- Apr 26, 2017
- Messages
- 656
The Dingo has some scratches on the blade on the show side running perpendicular to the edge. Blade is ever so slightly off center towards the show side. Liners/bolsters and clip have been freshly bead blasted. The blast doesn't match the stock blast exactly, it's pretty close though. Here it is next to the stock blast on my Mula:
https://imgur.com/a/1oztWi6
The JDVD has some small hard to see scratches on the blade. There are some snail trails on the handle and a tiny bit of the coating has worn off around the butt. Action is great on IKBS bearings and edge is decently sharp. Locks up solid. Blade steel is N690.
Dingo - $415
JDVD - $395
Pics - https://imgur.com/a/LVu1GKk
https://imgur.com/a/1oztWi6
The JDVD has some small hard to see scratches on the blade. There are some snail trails on the handle and a tiny bit of the coating has worn off around the butt. Action is great on IKBS bearings and edge is decently sharp. Locks up solid. Blade steel is N690.
Dingo - $415
JDVD - $395
Pics - https://imgur.com/a/LVu1GKk