Peak LED Flashlights

ndmiller65

Gold Member
Feedback: +46 / =0 / -0
Joined
Dec 18, 2005
Messages
456
Available for sale are three Eiger Ultras (1xaaa) and two Logan’s (1xcr123a). All came directly from Peak and are in like new condition. All have QTC for variable output. All will run on alkaline, nimh, lithium, or lithium ion. Alkaline is not recommended for the copper light. All have the narrow optic. The pocket clips are all from Prometheus Lights. There is no clip on the copper Ultra. I’d like $50 shipped per light.

The SS Logan was a custom order and has a Nichia 519a 4000k led. All of the others were built using stock LEDs in the 4-5000k range and are supposed to be HiCRI. They look it but I have now way to verify.

First I’ll take it gets it. Let me know if you have any questions.

1. SS Logan
2. HA Logan
3. SS Ultra. — SOLD
4. Copper Ultra
5. Brass Ultra — SOLD

Thanks!
 

Attachments

  • IMG_5630.jpeg
    IMG_5630.jpeg
    610.8 KB · Views: 9
  • IMG_5631.jpeg
    IMG_5631.jpeg
    977.7 KB · Views: 4
  • IMG_5632.jpeg
    IMG_5632.jpeg
    372.7 KB · Views: 3
Last edited:
It will run on alkaline but I was told in the past copper and alkaline aren’t the best combo. Something about off gassing possibly damaging the light. That said, it will run on alkaline, nimh, primary lithium, and rechargeable lithium ion. Basically any aaa sized cell that fits in it. I use nimh.
 
It will run on alkaline but I was told in the past copper and alkaline aren’t the best combo. Something about off gassing possibly damaging the light. That said, it will run on alkaline, nimh, primary lithium, and rechargeable lithium ion. Basically any aaa sized cell that fits in it. I use nimh.
Thanks for the reply!
 
Back
Top