- Joined
- May 3, 2017
- Messages
- 900
For sale:
Aegis Xiphos $SOLD
-Has a polished rocky/ice finish on the clip and entire show side scale
More photos:
Biltsharp VPK $SOLD
-Brand new
-Maker's mark pivot, green anodized pivot collars, hardware, and backspacer
More photos:
Brian Nadeau (Sharp by Design) Mini Typhoon $540
-Good condition, with a small scuff under the clip
-Two tone hand-rubbed satin/dark stonewashed finish on the blade and handles
More photos:
Brian Nadeau (Sharp by Design) Typhoon $SOLD
-Like new condition
-Two tone finished blade and handles
-There are some finger prints on the handles in the photos - they wipe off and leave a nice clean and consistent blue anodization on the handles.
More photos:
Blackstone Valley Knifeworks Pyroraptor $240
-BVK models are rare because only a few of each design are produced. This is even more exceptional; 1 of only 2 Pyroraptors in existence
-Great smooth action, comfortable ergonomics
-The sculpted pivot collar functions as an over-travel stop
-Edge could use some work, and this is reflected in the price.
More photos:
David Sharp (Sharpwerks) Framehorn $650
-Has been carried, and there are marks in the anodization
-Zircoti clip
More photos: https://imgur.com/a/xm8jEeS
David Sharp (Sharpwerks) Framehorn $650
-In very good condition - no signs of wear that I can see
More photos: https://imgur.com/a/bhpB0Kh
Doc Shiffer Designated Marksman $275
-Hamon blade
-Bronze anodized handles; there are some finger prints on the handle scales in the photos, which make it look a bit purple in some areas
More photos: https://imgur.com/a/hXEL4ES
Doc Shiffer Dress Mini Recon $SOLD
-Hard detent
-Hand rubbed satin blade
-Timascus bolster and carbon fiber scales
-Lock side is blue anodized with a bronze clip
-The inside of the liners and the backspacer are jeweled
-High end materials for a low price in a custom folder
-Couple tiny, almost imperceptible voids in the CF
More photos: https://imgur.com/a/BlfuBUI
NCC (Nick Chuprin) Imp $250
-Brand new from the maker
-Two tone blade; acid washed with hand rubbed satin/stonewashed flats
-Orange peel handle scales
-One of a few prototypes made
More photos: https://imgur.com/a/bLeSCsJ
NCC (Nick Chuprin) MK1 micro $SOLD
-Brand new from the maker
-Two tone blade; acid wash with hand rubbed satin flats
More photos: https://imgur.com/a/VwfpwR9
Pena Trapper front flipper $WITHDRAWN
-Mint condition; purchased from the first owner on Bladeforums less than two weeks ago and received today. A great knife, I just prefer my slip joint if I'm going to carry a Pena.
-Green micarta scales and brown micarta liners/backspacer
More photos: https://imgur.com/a/LrK9ueR
Steve Dumchus (Nova) Blades Skorpion $525
-Overall good condition, with some tiny snail trails on the clip
-The blade can be deployed by the flipper tab or with a middle finger flick of the hole in the blade
More photos: https://imgur.com/a/STjIMUd
Smock SK69 Balisong trainer $200
-Rare model that Mr Smock is no longer producing as far as I know
-Trainer blade
-Minor marks in the coating from playing with it a bit (where the pins contact the blade, at the latch contact points, etc), but those marks come with any normal flipping.
More photos: https://imgur.com/a/rLY1A6z
Aegis Xiphos $SOLD
-Has a polished rocky/ice finish on the clip and entire show side scale
More photos:
Biltsharp VPK $SOLD
-Brand new
-Maker's mark pivot, green anodized pivot collars, hardware, and backspacer
More photos:
Brian Nadeau (Sharp by Design) Mini Typhoon $540
-Good condition, with a small scuff under the clip
-Two tone hand-rubbed satin/dark stonewashed finish on the blade and handles
More photos:
Brian Nadeau (Sharp by Design) Typhoon $SOLD
-Like new condition
-Two tone finished blade and handles
-There are some finger prints on the handles in the photos - they wipe off and leave a nice clean and consistent blue anodization on the handles.
More photos:
Blackstone Valley Knifeworks Pyroraptor $240
-BVK models are rare because only a few of each design are produced. This is even more exceptional; 1 of only 2 Pyroraptors in existence
-Great smooth action, comfortable ergonomics
-The sculpted pivot collar functions as an over-travel stop
-Edge could use some work, and this is reflected in the price.
More photos:
David Sharp (Sharpwerks) Framehorn $650
-Has been carried, and there are marks in the anodization
-Zircoti clip
More photos: https://imgur.com/a/xm8jEeS
David Sharp (Sharpwerks) Framehorn $650
-In very good condition - no signs of wear that I can see
More photos: https://imgur.com/a/bhpB0Kh
Doc Shiffer Designated Marksman $275
-Hamon blade
-Bronze anodized handles; there are some finger prints on the handle scales in the photos, which make it look a bit purple in some areas
More photos: https://imgur.com/a/hXEL4ES
Doc Shiffer Dress Mini Recon $SOLD
-Hard detent
-Hand rubbed satin blade
-Timascus bolster and carbon fiber scales
-Lock side is blue anodized with a bronze clip
-The inside of the liners and the backspacer are jeweled
-High end materials for a low price in a custom folder
-Couple tiny, almost imperceptible voids in the CF
More photos: https://imgur.com/a/BlfuBUI
NCC (Nick Chuprin) Imp $250
-Brand new from the maker
-Two tone blade; acid washed with hand rubbed satin/stonewashed flats
-Orange peel handle scales
-One of a few prototypes made
More photos: https://imgur.com/a/bLeSCsJ
NCC (Nick Chuprin) MK1 micro $SOLD
-Brand new from the maker
-Two tone blade; acid wash with hand rubbed satin flats
More photos: https://imgur.com/a/VwfpwR9
Pena Trapper front flipper $WITHDRAWN
-Mint condition; purchased from the first owner on Bladeforums less than two weeks ago and received today. A great knife, I just prefer my slip joint if I'm going to carry a Pena.
-Green micarta scales and brown micarta liners/backspacer
More photos: https://imgur.com/a/LrK9ueR
Steve Dumchus (Nova) Blades Skorpion $525
-Overall good condition, with some tiny snail trails on the clip
-The blade can be deployed by the flipper tab or with a middle finger flick of the hole in the blade
More photos: https://imgur.com/a/STjIMUd
Smock SK69 Balisong trainer $200
-Rare model that Mr Smock is no longer producing as far as I know
-Trainer blade
-Minor marks in the coating from playing with it a bit (where the pins contact the blade, at the latch contact points, etc), but those marks come with any normal flipping.
More photos: https://imgur.com/a/rLY1A6z
Last edited: