All knives are in user condition and have seen gentle use, are without boxes, and have been priced accordingly. Prices are all inclusive, feel free to message with questions.
Spyderco Perrin PPT
This is the original release of the PPT in S30V. It was carried a few times and cut some tape and boxes. I disassembled it for a temporary scale swap and applied mineral oil to the pivot. Good action and sharp sharp factory edge. Note the oxidation spotting on the steel liners, very small and hardly noticeable, do not affect function but are there. Asking for $145.
~~~~~~~~~~
Spyderco Paramilitary 2 user
This is a standard PM2 in S30V and digicam G-10 that has been heavily modified and very well-used. I purchased it in this condition and have had it sharpened and used it at work. The digicam scales were sanded down to expose the natural G-10 color, making the handle thinner and translucent. The blade was stonewashed and acid etched, which rounded the spine making the blade slightly thinner at the spine, and I had it mirror sharpened (and please note the abnormal tip — whoever did the mod was sloppy on reprofiling the edge, but I had it fixed as best as could be). It's very sharp even after some use and is ready for work. Also in picture 2 the black marks on the blade are just graphite smears from sharpening a pencil, I did not notice them when taking pics and they will wipe right off. Asking for $90.
Spyderco Perrin PPT
This is the original release of the PPT in S30V. It was carried a few times and cut some tape and boxes. I disassembled it for a temporary scale swap and applied mineral oil to the pivot. Good action and sharp sharp factory edge. Note the oxidation spotting on the steel liners, very small and hardly noticeable, do not affect function but are there. Asking for $145.
~~~~~~~~~~
Spyderco Paramilitary 2 user
This is a standard PM2 in S30V and digicam G-10 that has been heavily modified and very well-used. I purchased it in this condition and have had it sharpened and used it at work. The digicam scales were sanded down to expose the natural G-10 color, making the handle thinner and translucent. The blade was stonewashed and acid etched, which rounded the spine making the blade slightly thinner at the spine, and I had it mirror sharpened (and please note the abnormal tip — whoever did the mod was sloppy on reprofiling the edge, but I had it fixed as best as could be). It's very sharp even after some use and is ready for work. Also in picture 2 the black marks on the blade are just graphite smears from sharpening a pencil, I did not notice them when taking pics and they will wipe right off. Asking for $90.
Last edited:
