ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,458
If you have any questions about what's here, let me know and I'll do my best to help you out. For more details, specs, or pictures, just ask and I'll get back to you as soon as I can. I don't get notifications for profile messages so PMs or shooting me an email at kenleung1995 at hotmail dot com is the best way to reach me. I also check my threads every once in a while so I'll usually see your posts. I can work with you on the price for some of these and I'm open to trades. If you don't have much feedback or forum history, I might ask you to ship first. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. The knives will come with what's shown unless otherwise stated. Thanks for taking a look.
For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Tashi collabs and customs, GTCs, Sharknivcos, RJ Martins, Dalibors, Broadwells, Black Snow Customs, VanderMeulens, Goodwyns, Rogovets, Guthries, Rotten Designs, ZT 0454, G&G Deadlock, Rockstead Shun, Skiff Drifter, and maybe a custom Emerson or just Striders in general but I'm always open to other offers. I like seeing what's out there and the worst I can do is pass. Cash can be added either way.
1. Phantom Steelworks Operator XL - like new - $2000
The biggest folder Chris made, not many were made
The blade, frame, clip, and both sides of the pivot have been murdered (textured)
4.5" blade in CPM-3V and with his unique "unearthed" finish
The entire front side and the clip are timascus and the texture makes it really shimmer in the light
Lockside is flamed ti
Inside of the frame is blasted
Has the best action I've felt on a Phantom Steelworks
Snaps open with a nice double-click and locks up tight
Centering is dead on
2. Sergio Consoli N° 281 - near mint - $1350
Seriously impressive flipper that's handmade by an Italian Knife Guild Maestro
Almost 4" blade with a flawless hand satin
Contoured lightning strike CF scales that have been perfectly polished, I don't feel any wires poking out
Clip is made from lightning strike CF as well and it goes in and out of pocket smoothly
Liners have a satin finish on the inside and are polished on the edges
Full length bronzed ti backspacer that's satin finished on the inside
The top on the backspacer has some faint marks
Polished custom pivot
Blade flies open with a snap and drops when you disengage the lock
Locks with no play at all
3. Peter Rassenti Druid - like new - $1500
Perfectly built integral with a CTS-XHP blade that comes in just under 3.5”
Satin flats and working finish grinds
2-tone frame, stonewashed with orange peeled, blasted, and tumbled edges
Slim and carries smaller than you’d expect
Has a nice snappy action and locks with no play
Centering is dead on
For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Tashi collabs and customs, GTCs, Sharknivcos, RJ Martins, Dalibors, Broadwells, Black Snow Customs, VanderMeulens, Goodwyns, Rogovets, Guthries, Rotten Designs, ZT 0454, G&G Deadlock, Rockstead Shun, Skiff Drifter, and maybe a custom Emerson or just Striders in general but I'm always open to other offers. I like seeing what's out there and the worst I can do is pass. Cash can be added either way.
1. Phantom Steelworks Operator XL - like new - $2000
The biggest folder Chris made, not many were made
The blade, frame, clip, and both sides of the pivot have been murdered (textured)
4.5" blade in CPM-3V and with his unique "unearthed" finish
The entire front side and the clip are timascus and the texture makes it really shimmer in the light
Lockside is flamed ti
Inside of the frame is blasted
Has the best action I've felt on a Phantom Steelworks
Snaps open with a nice double-click and locks up tight
Centering is dead on
2. Sergio Consoli N° 281 - near mint - $1350
Seriously impressive flipper that's handmade by an Italian Knife Guild Maestro
Almost 4" blade with a flawless hand satin
Contoured lightning strike CF scales that have been perfectly polished, I don't feel any wires poking out
Clip is made from lightning strike CF as well and it goes in and out of pocket smoothly
Liners have a satin finish on the inside and are polished on the edges
Full length bronzed ti backspacer that's satin finished on the inside
The top on the backspacer has some faint marks
Polished custom pivot
Blade flies open with a snap and drops when you disengage the lock
Locks with no play at all
3. Peter Rassenti Druid - like new - $1500
Perfectly built integral with a CTS-XHP blade that comes in just under 3.5”
Satin flats and working finish grinds
2-tone frame, stonewashed with orange peeled, blasted, and tumbled edges
Slim and carries smaller than you’d expect
Has a nice snappy action and locks with no play
Centering is dead on
