PLackey
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 1, 2010
- Messages
- 471
Ok fellas, I know it's pink, but hear me out. This is strategic; just a matter of perspective. So, you know that pink or purple shirt your wife bought you but you never want to wear? The one she's always bringing up when you go out. Well, now you can buy a knife guilt free because you had to. You need this one to coordinate with that shirt. It's just like those heels she "needed" to go with the outfit she wore once. Same same.
Otherwise, this is for the ladies out there. All 2 of you. Hope you like it.
Price includes PayPal and CONUS Shipping.
$260 - Jackal 350:
Full flat grind. Stabilized, dyed, yellow cedar burl. Black G10 liners. Loveless bolts and tube.
3 1/2" blade | 7 5/8" overall | 1/8" 80CrV2 | 3.5 - 4/5 handle thickness
Includes JRE sheath ($225 w/o sheath)
Kydex and hand made leather sheath options are also available.
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each blade goes through a 3 stage normalization process, followed by heating to austenitic temperature and quench in Parks 50 oil. Then it goes through a 2 stage tempering process. Hardness is 61-62 hrc. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
You can see other examples of my work on Instagram.com/plknives or check out MY WEBSITE
Otherwise, this is for the ladies out there. All 2 of you. Hope you like it.
Price includes PayPal and CONUS Shipping.
$260 - Jackal 350:
Full flat grind. Stabilized, dyed, yellow cedar burl. Black G10 liners. Loveless bolts and tube.
3 1/2" blade | 7 5/8" overall | 1/8" 80CrV2 | 3.5 - 4/5 handle thickness
Includes JRE sheath ($225 w/o sheath)
Kydex and hand made leather sheath options are also available.
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each blade goes through a 3 stage normalization process, followed by heating to austenitic temperature and quench in Parks 50 oil. Then it goes through a 2 stage tempering process. Hardness is 61-62 hrc. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
You can see other examples of my work on Instagram.com/plknives or check out MY WEBSITE
Last edited:
