Have these up for sale:
1. Cold Steel Talwar. 4" blade model with the CTS-XHP steel and gray G-10 handles. Tri-Ad lock, thumb plate/pocket hook opener. Not the biggest CS fan, but this thing is admittedly very nicely made. Locks up rock solid, blade is dead centered and good and sharp. LNIB with box. $85.00 SPF
2. Kizer Sheepdog C01C. 3.25" S35VN. Has been carried a few times, but never used. Couple of superficial scuffs on the pocket clip finish, nothing major. Flips like a dream. Super sharp, smooth and locks up tight. Dead centered. Complete with nice zipper pouch and box. $175.00 shipped. SOLD
3.Kizer Cucchiara Dukes. 3" VG-10 blade with the black G-10 handles. Super light, snappy as heck, just a fun smaller flipper. Great action, strong lock up and dead centered. Excellent factory edge. LNIB with box. $55.00 shipped. SOLD
4.Spyderco Paramilitary 2 in M4 steel with the natural G-10 scales. Dealer exclusive. Clip was flipped to tip-up upon arrival, but never used. Smooth, solid and centered. Wicked sharp. Nice iteration of the PM2. LNIB with box with box. $150.00 shipped. SOLD
5. Spyderco Hungarian. This one kind of slipped past me when it came out, but after handling one in person I had to have it. (May actually keep this one, it's that nice.) 3.6" CTS-XHP blade, polished steel bolsters and polished black G-10. Buttery smooth action, thick liners, great lock-up and just so well finished and put together from top to bottom. Like a gent's PM2 or slightly smaller Millie. Feel like this is one of Spyderco's actual best, but went completely under the radar given it's somewhat unorthodox ergos and looks. LNIB with box. $160.00 shipped.
6. Viper Vox design Odino. Stonewashed 3" N690Co blade, black G-10 and stonewashed Ti frame lock. Blue anodized back spacer. Bearing pivot action is excellent. Locks up like a little tank, solid- no play. Reversible deep carry tip-up clip. Factory edge is very, very sharp. Blade is dead centered when closed. New in box with box. $125.00 shipped.
7.Lionsteel KUR. New model flipper, the bigger brother of sorts to the TRE model. 3.45" stonewash Sleipner blade, 3D milled and textured orange G-10 handles. Thick nested and skeletonized liners. Bearing pivot. If you know Lionsteel, you know they do fit and finish to the nines, and this is no exception. Deep carry wire pocket clip. Superior attention to detail everywhere. The finish of the G-10 with the micro ridge texture. The shape of the back spacer and flipper tab. The surface milling on the lock bar where your finger pushes to release. The design of the pivot and matching fasteners. The crowned spine of the blade...all just nicely done. Flips with authority, locks up with a solid thwack. Zero blade play, stout feel. Blade is dead centered. And as an extra bonus, Lionsteel has figured out how to properly sharpen Sleipner. (Some of the SR2A models with the same steel were pretty dull out of the box.) Factory edge is very nicely finished and properly sharp. Going to be one of the best "sleeper" models of the year, I have no doubt. New in box with box. $125.00 shipped. SOLD
8. Fox Desert Fox Boris Manasherov design flipper. New model. 3.75" N690Co blade, 4.75" handle, 8.5" OAL. Milled black G-10 over stainless skeletonized liners. Caged bearing pivot, ceramic detent. Deep carry tip-up clip with swap-able glass breaker or smooth end tip. (Comes with tool to change out.) Incredibly ergonomic in hand and multiple grips. "Smooth" hardly describes the action on this thing, Fox killed it on this one inside and out. Very, very impressive. Flips with zero drag, and the blade can be "shaked" back into the handle with ease. Probably the smoothest action on a production flipper I've ever handled- no hype. Build screams quality. Locks up solid with zero play. Blade is wicked sharp from the factory and dead centered when closed. New in box with nice zipper pouch, tools and extra glass breaker tip. $165.00 shipped. SOLD
Pics below.
Prices include USPS Priority in the U.S. Willing to ship elsewhere at buyer's expense, but please note in the last few months USPS rates for international shipping have increased significantly.
PayPal preferred but absolutely no "eChecks". Low ball offers will be politely ignored. Not interested in trades at this time.
Drop me a note if you're interested, e-mail always works best/fastest. (I don't camp on my FS posts to track who posted what and when.)
Thanks!
Scott
1. Cold Steel Talwar. 4" blade model with the CTS-XHP steel and gray G-10 handles. Tri-Ad lock, thumb plate/pocket hook opener. Not the biggest CS fan, but this thing is admittedly very nicely made. Locks up rock solid, blade is dead centered and good and sharp. LNIB with box. $85.00 SPF
2. Kizer Sheepdog C01C. 3.25" S35VN. Has been carried a few times, but never used. Couple of superficial scuffs on the pocket clip finish, nothing major. Flips like a dream. Super sharp, smooth and locks up tight. Dead centered. Complete with nice zipper pouch and box. $175.00 shipped. SOLD
3.Kizer Cucchiara Dukes. 3" VG-10 blade with the black G-10 handles. Super light, snappy as heck, just a fun smaller flipper. Great action, strong lock up and dead centered. Excellent factory edge. LNIB with box. $55.00 shipped. SOLD
4.Spyderco Paramilitary 2 in M4 steel with the natural G-10 scales. Dealer exclusive. Clip was flipped to tip-up upon arrival, but never used. Smooth, solid and centered. Wicked sharp. Nice iteration of the PM2. LNIB with box with box. $150.00 shipped. SOLD
5. Spyderco Hungarian. This one kind of slipped past me when it came out, but after handling one in person I had to have it. (May actually keep this one, it's that nice.) 3.6" CTS-XHP blade, polished steel bolsters and polished black G-10. Buttery smooth action, thick liners, great lock-up and just so well finished and put together from top to bottom. Like a gent's PM2 or slightly smaller Millie. Feel like this is one of Spyderco's actual best, but went completely under the radar given it's somewhat unorthodox ergos and looks. LNIB with box. $160.00 shipped.
6. Viper Vox design Odino. Stonewashed 3" N690Co blade, black G-10 and stonewashed Ti frame lock. Blue anodized back spacer. Bearing pivot action is excellent. Locks up like a little tank, solid- no play. Reversible deep carry tip-up clip. Factory edge is very, very sharp. Blade is dead centered when closed. New in box with box. $125.00 shipped.
7.Lionsteel KUR. New model flipper, the bigger brother of sorts to the TRE model. 3.45" stonewash Sleipner blade, 3D milled and textured orange G-10 handles. Thick nested and skeletonized liners. Bearing pivot. If you know Lionsteel, you know they do fit and finish to the nines, and this is no exception. Deep carry wire pocket clip. Superior attention to detail everywhere. The finish of the G-10 with the micro ridge texture. The shape of the back spacer and flipper tab. The surface milling on the lock bar where your finger pushes to release. The design of the pivot and matching fasteners. The crowned spine of the blade...all just nicely done. Flips with authority, locks up with a solid thwack. Zero blade play, stout feel. Blade is dead centered. And as an extra bonus, Lionsteel has figured out how to properly sharpen Sleipner. (Some of the SR2A models with the same steel were pretty dull out of the box.) Factory edge is very nicely finished and properly sharp. Going to be one of the best "sleeper" models of the year, I have no doubt. New in box with box. $125.00 shipped. SOLD
8. Fox Desert Fox Boris Manasherov design flipper. New model. 3.75" N690Co blade, 4.75" handle, 8.5" OAL. Milled black G-10 over stainless skeletonized liners. Caged bearing pivot, ceramic detent. Deep carry tip-up clip with swap-able glass breaker or smooth end tip. (Comes with tool to change out.) Incredibly ergonomic in hand and multiple grips. "Smooth" hardly describes the action on this thing, Fox killed it on this one inside and out. Very, very impressive. Flips with zero drag, and the blade can be "shaked" back into the handle with ease. Probably the smoothest action on a production flipper I've ever handled- no hype. Build screams quality. Locks up solid with zero play. Blade is wicked sharp from the factory and dead centered when closed. New in box with nice zipper pouch, tools and extra glass breaker tip. $165.00 shipped. SOLD
Pics below.
Prices include USPS Priority in the U.S. Willing to ship elsewhere at buyer's expense, but please note in the last few months USPS rates for international shipping have increased significantly.
PayPal preferred but absolutely no "eChecks". Low ball offers will be politely ignored. Not interested in trades at this time.
Drop me a note if you're interested, e-mail always works best/fastest. (I don't camp on my FS posts to track who posted what and when.)
Thanks!
Scott
Last edited:
