Heya all! I just walked through the first snowstorm of the year, which tells me it's time to trim some deadweight from my collection, and use the proceeds to buy more winter clothing. New England weather can be rough.
Spyderco Paramilitary 2: Standard satin/black model. Got it on the cheap because the action was stiff and gritty. Disassembled it and quickly discovered the issue- the liners were not machined cleanly and there were some unfinished edges preventing the liners from sitting flat. Polished off the raised edges, polished every point of contact between the liners and washers. Will drop free (albeit slowly) with no blade play once some oil has been applied. Blade came pretty well-used, I reprofiled it to 30DPS and stropped it. Fair number of superficial scratches only visible in certain light. G10 is used and worn, with pocket clip marks from both tip up and tip down carry on the right hand side. Have the box and papers. Asking 85$ shipped, 150$ for both it and the Casey Lynch scales.
http://imgur.com/jnmmZ1T
http://imgur.com/JepNO3W
http://imgur.com/4JhGxlc
http://imgur.com/bY4zlaM
Casey Lynch aluminum PM2 handles & Ti deep carry clip: Bought direct from Casey, will come in his fantastic packaging. Anodized aluminum, appears matte, but has an almost stonewashed look in direct sunlight. 3 small nicks in the anodizing, plus an abraded spot where the clip rests. Clip sports a single small scratch, plus the usual titanium wear & tear. Carried these for about 4 months, sincerely impressed with the quality. Sadly, they're a little too smooth for comfortable use while wearing gloves, which is why I'm looking to pass them on. Asking 60$, or 150$ as a package deal with the PM2.
http://imgur.com/aSICQkY
TTPockeTTools Pocket Edge: Interesting hybrid of a compound bevel knife and OPMT, made from 154CM barstock. In a rather novel twist, the sheath functions as a handle for the bottle opener/prybar. Sheath has two small holes drilled on one side (set up for a Benchmade deep carry clip). Asking 30$
http://imgur.com/bY4zlaM
http://imgur.com/BoyCVeX
http://imgur.com/ePFDE0q
http://imgur.com/ex7RgBT
http://imgur.com/bjzgd3O
Spyderco Paramilitary 2: Standard satin/black model. Got it on the cheap because the action was stiff and gritty. Disassembled it and quickly discovered the issue- the liners were not machined cleanly and there were some unfinished edges preventing the liners from sitting flat. Polished off the raised edges, polished every point of contact between the liners and washers. Will drop free (albeit slowly) with no blade play once some oil has been applied. Blade came pretty well-used, I reprofiled it to 30DPS and stropped it. Fair number of superficial scratches only visible in certain light. G10 is used and worn, with pocket clip marks from both tip up and tip down carry on the right hand side. Have the box and papers. Asking 85$ shipped, 150$ for both it and the Casey Lynch scales.
http://imgur.com/jnmmZ1T
http://imgur.com/JepNO3W
http://imgur.com/4JhGxlc
http://imgur.com/bY4zlaM
Casey Lynch aluminum PM2 handles & Ti deep carry clip: Bought direct from Casey, will come in his fantastic packaging. Anodized aluminum, appears matte, but has an almost stonewashed look in direct sunlight. 3 small nicks in the anodizing, plus an abraded spot where the clip rests. Clip sports a single small scratch, plus the usual titanium wear & tear. Carried these for about 4 months, sincerely impressed with the quality. Sadly, they're a little too smooth for comfortable use while wearing gloves, which is why I'm looking to pass them on. Asking 60$, or 150$ as a package deal with the PM2.
http://imgur.com/aSICQkY
TTPockeTTools Pocket Edge: Interesting hybrid of a compound bevel knife and OPMT, made from 154CM barstock. In a rather novel twist, the sheath functions as a handle for the bottle opener/prybar. Sheath has two small holes drilled on one side (set up for a Benchmade deep carry clip). Asking 30$
http://imgur.com/bY4zlaM
http://imgur.com/BoyCVeX
http://imgur.com/ePFDE0q
http://imgur.com/ex7RgBT
http://imgur.com/bjzgd3O
