- Joined
- Nov 1, 2000
- Messages
- 28,365
This is all my Reese Weiland stuff. Besides the Black Knife and the CF scaled proto, everything else has had mods done by him.
-
The BladeForums.com 2024 Traditional Knife is available! Price is $250 ea (shipped within CONUS).
Order here: https://www.bladeforums.com/help/2024-traditional/
post you knife photos
- Thread starter JasonMB
- Start date
- Joined
- Nov 11, 2009
- Messages
- 1,425
[youtube]SQNyoGuuukI&feature=channel[/youtube]
- Joined
- Aug 14, 2009
- Messages
- 2,119
- Joined
- Aug 14, 2009
- Messages
- 2,119
- Joined
- Oct 3, 2004
- Messages
- 4,553
I'll play. 
Multi type tools. The SAK on the far right is my first knife, the off colored one above is an unbranded made in China, but was a gift from one of my uncles with the name of the last ship he served on painted, or something, onto it.
Scaaarrry black knives
Some of my fixed blades:
traditional type folders:
Multi type tools. The SAK on the far right is my first knife, the off colored one above is an unbranded made in China, but was a gift from one of my uncles with the name of the last ship he served on painted, or something, onto it.
Scaaarrry black knives
Some of my fixed blades:
traditional type folders:
The izula is next on my list...
- Joined
- Dec 25, 2009
- Messages
- 409
Bear Claw Hunter/Skinner
Push Dagger
Hacker 1
Hacker 2
Rib Tickler
All of these blades are handmade by me. Bear Claw is my latest, a christmas gift for a cousin, has a tempered and work hardened steel blade with hardwood scale grips held together with epoxy and copper tube rivets and sealed with polyurethane. I need to make another one of those for myself. Push Dagger is pretty self explanetory. Leaf shaped blade thats been work hardened and tempered. Hardwood handle with partial tang. Hacker 1 & 2 are pretty simple. Store bought flat stock steel that I heated and hammered along one edge to create the curve. I attached the hardwood scales with epoxy and brass pins. I then ground finger grooves into hacker 2, just for the heck of it. I then sealed the wood with polurethane. Rib Tickler is more of an experiment with clay and ash tempering where I quenched the blade with the edge coated with a mixture of ash and clay. It turned out pretty good, so I went and finished it as a kitchen knife. The grip is a simple piece of pine with clear coat and a wood scabard.
Push Dagger
Hacker 1
Hacker 2
Rib Tickler
All of these blades are handmade by me. Bear Claw is my latest, a christmas gift for a cousin, has a tempered and work hardened steel blade with hardwood scale grips held together with epoxy and copper tube rivets and sealed with polyurethane. I need to make another one of those for myself. Push Dagger is pretty self explanetory. Leaf shaped blade thats been work hardened and tempered. Hardwood handle with partial tang. Hacker 1 & 2 are pretty simple. Store bought flat stock steel that I heated and hammered along one edge to create the curve. I attached the hardwood scales with epoxy and brass pins. I then ground finger grooves into hacker 2, just for the heck of it. I then sealed the wood with polurethane. Rib Tickler is more of an experiment with clay and ash tempering where I quenched the blade with the edge coated with a mixture of ash and clay. It turned out pretty good, so I went and finished it as a kitchen knife. The grip is a simple piece of pine with clear coat and a wood scabard.
- Joined
- Jan 6, 2010
- Messages
- 219
RAT PACK 512
