Post your strippers!

Tyrkon Lawson

Tyrkon Lawson

Joined
Oct 31, 2003
Messages
8,583
Sure coating is cool. But when it all wears off it's nice to know INFI strippers look real "nice" (Borat voice). Hear's my BATAC and Heavy Duty. Great users.

100_1121a.jpg


Post your nekkid INFI if you have any! :D
 
I'll post my Crash Axe when I put about 15 more hours into it. It's the only one I've attempted, and getting down past the dimples on the SR-77 is a lot of work. Did your INFI satin out easy? They look great.
 
Thanks. As you can see I didn't bother getting rid of the dimples. These two were easy.

(1) Step 1: apply stripper.
(2) Step 2: wipe off coating.
(3) Step 3: use a scotch-brite drill attachment to satin out the blade.
(4) Step 4: polish spine.

That's it. 30 minutes work. These two were real easy. Not much to clean up.

PLEASE post pics of your Crash Rat when you finish. That sounds awesome. ;)
 
What does the stripper do to the handles? I know Micarta is supposed to be impervious to chemicals. Just wanted to ask...
 
Here's a little GW that got stripped (it actually started as a double cut, but was so beat up i decided to satin finish it :thumbup: )

GWmod002.jpg
 
xaman said:
Here's a little GW that got stripped (it actually started as a double cut, but was so beat up i decided to satin finish it :thumbup: )

GWmod002.jpg
Click to expand...

xaman, that's a nice looking Warden with the satin finish. :thumbup:

What happened to that custom Swamp Rat scale though? :eek:
 
SJTAC that started as tan/tan (sorry Chuck :p ) Butt ground down by Leatherman...

SJTac006.jpg
 
Guyon said:
xaman, that's a nice looking Warden with the satin finish. :thumbup:

What happened to that custom Swamp Rat scale though? :eek:
Click to expand...

LOL, that always comes up... It's original, just a bad angle on the pic. It's a very rough cut and natural piece of sheephorn -- wish i could get them to do some more like it, in INFI...

gunknifecombo003small.jpg
 
xaman said:
LOL, that always comes up... It's original, just a bad angle on the pic. It's a very rough cut and natural piece of sheephorn -- wish i could get them to do some more like it, in INFI...

gunknifecombo003small.jpg
Click to expand...

I see now. That rough horn is cool. :thumbup:

In the first pic, because you can't see the rest of the scale, it looked like you'd gotten it to close to a hot electrical wire and KAPLOOEY!
 
Tyrkon Lawson said:
Thanks. As you can see I didn't bother getting rid of the dimples. These two were easy.

(1) Step 1: apply stripper.
(2) Step 2: wipe off coating.
(3) Step 3: use a scotch-brite drill attachment to satin out the blade.
(4) Step 4: polish spine.

That's it. 30 minutes work. These two were real easy. Not much to clean up.

PLEASE post pics of your Crash Rat when you finish. That sounds awesome. ;)
Click to expand...

Thanks for that it sounds so easy even a Caveman can do it.
 
You must log in or register to reply here.
Back
Top