Price drop Enzo Trapper 95 scandi Elmax

[Spikediesel]

Hi everyone, today I'm offering my Enzo Trapper 95 scandi ground in Elmax. This knife has Green G10 scales with orange G10 liners fastened with torx screws. Also included is a second set of desert G10 scales with red liner material and hardware plus extra rivets and brass Corbys. All of this was purchased straight from Brisa in Finland. THERE IS NO BOX OR SHEATH INCLUDED. The blade has been stropped so it shows a few light scratches on the bevel. I have not used this knife, it is one of many I have put together. Price is $110 shipped in the US only PayPal G&S. First "I'll take it" followed by pm for payment info.
Thanks

 

[Steelhog]

Not sure if you are interested in trades - but I have a number of items listed in trades. I would do the listed Benchmade and two KOAs for this knife in case you are interested.

 

[Spikediesel]

Thanks, but I’m not interested in trades right now.

 

[Sling52]

As currently assembled, could the torx screws be removed / replaced with the provided corby bolts (if one so chooses)? Thx.

 

[Spikediesel]

As currently assembled, could the torx screws be removed / replaced with the provided corby bolts (if one so chooses)? Thx.

Yes, however there would be a small gap around the Corby, you would have to fill the hole with epoxy insert and tighten the corby allowing the epoxy to squeeze out filling the gap, then grind flush. These g10 scales were designed by brisa to be installed with the provided rivets that have a slightly larger head than the corbys.