I hate to part with these 2 Wohlwends since Mark isn't making knives for the foreseeable future,but I have my eye on a few slippies.
First up is a Large Bushcrafter by Mark Wohlwend made of 1/8" L6 & some beautiful brown micarta w/red liners.
It has 2 aluminum & 4 brass pins in his new pin pattern,with a brass tube.
Scandi grind with heat scale on the flats.
Now for a bit of history on this one.....
When I first got this guy I took it out back of the shop for a test run(like I do with all my new fixed blades)& did some chopping on a 4x4 then tried making some curlies,but noticed the blade had rolled pretty bad from the chopping.
I took some pics,contacted Mark & of course he said to send it back,he'd take care of it & boy did he.
I chopped,batoned & made feather sticks no problem after getting it back.:thumbup:
It came with black micarta initially & while he had it in the shop for re-heat treating I had him swap the black for the brown micarta on it now.(almost looks like wood eh?)
The handle is very comfy with no sharp edges & gives a reassuring solid feel in hand.
The sheath is made by me & the third and fifth rivets on each side are spaced for an EESE pouch if you want to attach one.(not included)
The fire steel loop is sized for a 5/16 rod.(I didn't want to show the rod because it is well worn & pitted from corrosion,but I will throw in in if the buyer wants it,just let me know,it has an Oak handle with elastic cord.)
The belt loop pivots on one screw making it easy to sit with the sheath on a belt.
$185.00 shipped.Now $170.00
Next is a Wohlwend Compact Bushcrafter made of 1/8" 1095.No worries with the HT on this one,it's been tested.
Scandi grind with heat scale on the flats.
Torched Osage Orange scales with red liners + aluminum pin & tube.
Comes with the sheath in the pic.
$100.00 shipped.Now $85.00
Last is a Daniel Fairly Legal EDC made of 1/8" 01,right side chisel grind with a convex tip for strength.
Tan/natural micarta with SS flared tubes & exposed rear tang.
Comes with the sheath shown.
Daniel makes his sheaths with screws vs rivets for ease of cleaning 'em out.
I did some carving with it to check it out & it carves with the best of them,no worries.
$125.00 shipped.Now $115.00
I will take Paypal or a USPS MO for payment.
Shipping via USPS Priority with DC.(+ insurance to cover my butt.)
I can only ship friday or saturday because of my work schedule.
The first I'll take it in this thread gets the knife wanted,then send me an email or PM to work out the details please.
You must be 18 or older & legally able to own a knife.
No international buyers unless I've dealt with you before & you cover the cost of shipping.
Thanks for looking.
Myke
First up is a Large Bushcrafter by Mark Wohlwend made of 1/8" L6 & some beautiful brown micarta w/red liners.
It has 2 aluminum & 4 brass pins in his new pin pattern,with a brass tube.
Scandi grind with heat scale on the flats.
Now for a bit of history on this one.....
When I first got this guy I took it out back of the shop for a test run(like I do with all my new fixed blades)& did some chopping on a 4x4 then tried making some curlies,but noticed the blade had rolled pretty bad from the chopping.
I took some pics,contacted Mark & of course he said to send it back,he'd take care of it & boy did he.
I chopped,batoned & made feather sticks no problem after getting it back.:thumbup:
It came with black micarta initially & while he had it in the shop for re-heat treating I had him swap the black for the brown micarta on it now.(almost looks like wood eh?)
The handle is very comfy with no sharp edges & gives a reassuring solid feel in hand.
The sheath is made by me & the third and fifth rivets on each side are spaced for an EESE pouch if you want to attach one.(not included)
The fire steel loop is sized for a 5/16 rod.(I didn't want to show the rod because it is well worn & pitted from corrosion,but I will throw in in if the buyer wants it,just let me know,it has an Oak handle with elastic cord.)
The belt loop pivots on one screw making it easy to sit with the sheath on a belt.
$185.00 shipped.Now $170.00
Next is a Wohlwend Compact Bushcrafter made of 1/8" 1095.No worries with the HT on this one,it's been tested.
Scandi grind with heat scale on the flats.
Torched Osage Orange scales with red liners + aluminum pin & tube.
Comes with the sheath in the pic.
$100.00 shipped.Now $85.00
Last is a Daniel Fairly Legal EDC made of 1/8" 01,right side chisel grind with a convex tip for strength.
Tan/natural micarta with SS flared tubes & exposed rear tang.
Comes with the sheath shown.
Daniel makes his sheaths with screws vs rivets for ease of cleaning 'em out.
I did some carving with it to check it out & it carves with the best of them,no worries.
$125.00 shipped.Now $115.00
I will take Paypal or a USPS MO for payment.
Shipping via USPS Priority with DC.(+ insurance to cover my butt.)
I can only ship friday or saturday because of my work schedule.
The first I'll take it in this thread gets the knife wanted,then send me an email or PM to work out the details please.
You must be 18 or older & legally able to own a knife.
No international buyers unless I've dealt with you before & you cover the cost of shipping.
Thanks for looking.
Myke
Last edited:
