Swoopmaster
Platinum Member
- Joined
- Jul 18, 2008
- Messages
- 965
All prices include shipping and insurance to any address in the CONUS. I accept paypal or USPSMO. Please PM or email me with questions. Thanks for looking.
Robert Lyons Damascus Kukris (non-serrated spine): $450 OBO
Blade Length: 15-inches
Blade Thickness: 0.27-inches
Blade Steel: 1075 high-carbon steel & 4340 low alloy steel folded (300+ layers); 58 RC (Rockwell Hardness)
Handle Length: 5.4-inches
Handle Material: Ebony wood with mosaic pins (a couple of the tiny brass rods in the forward mosaic pin are loose but could easily be epoxied if needed)
Sheath: Leather
Condition: New/unused
Price: $450 now $350 OBO
Robert Lyons Damascu Kukris (Serrated Spine): $450 OBO
Blade Length: 15.25-inches
Blade Thickness: 0.21-inches
Blade Steel: 1075 high-carbon steel & 4340 low alloy steel folded (300+ layers); 58 RC (Rockwell Hardness)
Handle Length: 5.4-inches
Handle Material: Ebony wood and mosaic pins (it looks like one of the ebony scales was damaged at some point and has been repaired)
Sheath: Leather
Condition: New/unused
Price: $450 now $350 OBO
Mastersmith J. Nielson "B.U.K." (Basic Utility Knife):
* Blade Length: 3.1 inches
* Blade Thickness: 0.135 inches
* Blade Steel: Firestorm Damascus from 1096 and 15n20 high carbon steels
* Handle Material: Not sure, but it's Honey-colored & Translucent and the damascus pattern shows through
* Handle Length: 2.9 inches
* Sheath: No sheath, it will come with a zipper knife pouch
* Condition: New/unused
* Price: $225
Mastersmith Burt Foster "Dark Side":
* Blade Length: 2.55 inches (measured from plunge line)
* Blade Thickness: 0.16 inches
* Blade Steel: 416 over 1095 core
* Handle Length: 3.5 inches (measured from plunge line)
* Sheath: Leather (shown)
* Condition: New/unused
* Price: $175 SPF's
Fletcher Knives "Necker":
* Length: 3.5 inches
* Sheaths: Two; Kydex
* Thickness: 0.185 inches
* Condition: New/unused
* Price: $65 now $45
Emilio Morgan Hunter-Skinner:
* Blade Length: 3.8-inches
* Blade Thickness: 0.182-inches, hollow ground
* Blade Steel: ATS-34
* Handle Length: 4.4-inches
* Handle Material: Black G10
* Sheath: Leather
* Condition: Sheath shows some wear but the blade does not appear to have been used or sharpened
* Price: $165 now $125
Ban Tang "Fatty" BT4:
* Blade Length: 4.7 inches
* Handle length: 4.1 inches
* Blade Thickness: 0.258 inches (hollow ground so edge is thinner and usable/practical and balance is slightly forward of handle)
* Blade Steel: A2
* Handle Material: Black Micarta
* Condition: Very Light Use
* Sheath: Black Leather (shown in pic)
* Price: $245 SOLD/SHIPPED
Robert Lyons Damascus Kukris (non-serrated spine): $450 OBO
Blade Length: 15-inches
Blade Thickness: 0.27-inches
Blade Steel: 1075 high-carbon steel & 4340 low alloy steel folded (300+ layers); 58 RC (Rockwell Hardness)
Handle Length: 5.4-inches
Handle Material: Ebony wood with mosaic pins (a couple of the tiny brass rods in the forward mosaic pin are loose but could easily be epoxied if needed)
Sheath: Leather
Condition: New/unused
Price: $450 now $350 OBO
Robert Lyons Damascu Kukris (Serrated Spine): $450 OBO
Blade Length: 15.25-inches
Blade Thickness: 0.21-inches
Blade Steel: 1075 high-carbon steel & 4340 low alloy steel folded (300+ layers); 58 RC (Rockwell Hardness)
Handle Length: 5.4-inches
Handle Material: Ebony wood and mosaic pins (it looks like one of the ebony scales was damaged at some point and has been repaired)
Sheath: Leather
Condition: New/unused
Price: $450 now $350 OBO
Mastersmith J. Nielson "B.U.K." (Basic Utility Knife):
* Blade Length: 3.1 inches
* Blade Thickness: 0.135 inches
* Blade Steel: Firestorm Damascus from 1096 and 15n20 high carbon steels
* Handle Material: Not sure, but it's Honey-colored & Translucent and the damascus pattern shows through
* Handle Length: 2.9 inches
* Sheath: No sheath, it will come with a zipper knife pouch
* Condition: New/unused
* Price: $225
Mastersmith Burt Foster "Dark Side":
* Blade Length: 2.55 inches (measured from plunge line)
* Blade Thickness: 0.16 inches
* Blade Steel: 416 over 1095 core
* Handle Length: 3.5 inches (measured from plunge line)
* Sheath: Leather (shown)
* Condition: New/unused
* Price: $175 SPF's
Fletcher Knives "Necker":
* Length: 3.5 inches
* Sheaths: Two; Kydex
* Thickness: 0.185 inches
* Condition: New/unused
* Price: $65 now $45
Emilio Morgan Hunter-Skinner:
* Blade Length: 3.8-inches
* Blade Thickness: 0.182-inches, hollow ground
* Blade Steel: ATS-34
* Handle Length: 4.4-inches
* Handle Material: Black G10
* Sheath: Leather
* Condition: Sheath shows some wear but the blade does not appear to have been used or sharpened
* Price: $165 now $125
Ban Tang "Fatty" BT4:
* Blade Length: 4.7 inches
* Handle length: 4.1 inches
* Blade Thickness: 0.258 inches (hollow ground so edge is thinner and usable/practical and balance is slightly forward of handle)
* Blade Steel: A2
* Handle Material: Black Micarta
* Condition: Very Light Use
* Sheath: Black Leather (shown in pic)
* Price: $245 SOLD/SHIPPED
Last edited: