- Joined
- Aug 17, 2014
- Messages
- 4,914
Well, I'm doing a little bit of a collection reset here. Letting a lot of stuff go to recoup funds and whittle my collection down to what I'm carrying most. My loss is y'all's gain.
Spyderco:
All of these come with boxes and paperwork.
Delica Purple: Carried a couple of times, shows little to no wear. Factory edge is still razor sharp.
Delica ZDP: Carried a couple of times, shows little to no wear. Factory edge is still razor sharp.
Delica Wharncliffe/Hap40: NIB, never used, never carried. Only taken out for pictures. Razor sharp factory edge.
Chaparral: Carried a couple of times, shows little wear. Factory edge is still razor sharp, but has been stropped. Note on this one that the wire clip is black rather than silver. The reason for this is that the original clip was all janky and I had Spyderco send me a new one. For some reason they sent the blacked out version, and I just went with it. That will be the clip that comes on it.
Sage 2: Carried and used but not abused at all. Super smooth action, solid lockup. Sharpened on the Wicked Edge at 15 dps to 1000 grit for a razor sharp finish. A solid example of the Sage 2.
Southard: Snappy flipping, super smooth action, no issues with the bearings, solid lockup, perfectly centered. Sharpened on the Wicked Edge at 15 dps to 600 grit, hair popping sharp. The lanyard tube has been removed, but is included. A solid example of this discontinued model.
Manix 2 LW: Free dropping action, centered blade, razor sharp 16 degree Wicked Edge at 400 grit (perfect for the S110V steel, super aggressive). Has been carried but shows little to no signs of wear.
Zero Tolerance:
All of these come with boxes and paperwork except the 0801TI which is missing the little pamphlet from ZT. It has the box, though.
0450: Carried a few times, comes with a Hinderer clip installed, as pictured. Also includes the stock clip and screws. Super snappy, smooth, free dropping action. Perfect centering and lockup. Sharpened at 19 degrees on the Wicked Edge to a high polished finish. Hair popping sharp. Great example of the 0450.
0562CF: Centered, snappy, smooth, rock solid lockup. Factory edge that has been stropped to keep it hair shaving sharp. Carried a few times but signs of wear are hard to detect. CTS 204P steel on this model.
0609: Perfect centering, snappy, super smooth, solid lockup. This one has been carried a fair bit so there are some slight signs of wear on the bronze ano and the lettering on the clip has faded off (looks better that way, IMO). Sharpened at 17 degrees on the Wicked Edge to a high polished finish. Hair popping sharp.
0801TI: Perfect centering, snappy, extremely free-dropping smooth, solid lockup. Sharpened at 17 degrees on the Wicked Edge to a high polished finish. Hair popping sharp. This one includes an excellent titanium deep carry clip from MXG Gear, as shown in the pics. Original pocket clip is included as well.
Benchmade:
940: The best example of the standard 940 I've had to date. Sharpened at 16 degrees on the Wicked Edge to a high polished finish. Hair popping sharp. Centering is almost perfect, action is buttery smooth with no play. The blade on this one is the best ground 940 I've ever had. Very nice and thin behind the edge and even. This one does not come with the original box, but does come with a Benchmade box, the original emerson-style clip, and an addtional aftermarket deep-carry titanium clip and screws. Currently has a Benchmade split-arrow clip installed, which I think is the best looking on this model.
51 Morpho Balisong: Selling this one for a friend, and I'm pretty unfamiliar with balisongs. There is some wear on the pocket clip, but other than that it doesn't show much wear. Has its original edge which is still sharp. Action is super free. No issues that I can see on this one. Comes in a Benchmade box, but it is not original, just fyi.
Giant Mouse:
Both of these come with original boxes and all paperwork.
Giant Mouse GM1: The original Giant Mouse knife, which is getting harder to find these days. This example has solid lockup, good flipping action, and smooth action. Flips well with flipper, thumb hole, or spydie flick deployment. Blade is centered and there are no signs of wear that I can detect. This one has been sharpened at 16 degrees on the Wicked Edge to a razor sharp, high polished finish.
Giant Mouse GM2: The second Giant Mouse knife, with it's fantastic bowie blade. This example has solid lockup, good flipping action, and smooth action. Flips well with flipper, thumb hole, or spydie flick deployment. Blade is centered. Some wear on the pocked clip ano from carry. This one has been sharpened at 15 degrees on the Wicked Edge to a razor sharp, high polished finish.
Steel Will Budget Package:
All of these come with boxes and paperwork.
Selling all these together and won't split them up, please do not ask. Comes with the Steel Will Modus, 3" Cutjack, and 3.25" Intrigue. All of them have been carried maybe once. All are well centered and flip superbly. The Intrigue was sharpened at 18 degrees per side on the Wicked Edge to a hair popping 1000 grit finish since the factory edge was kinda dull. The other two have sharp factory edges.
Hinderer:
Hinderer XM-18 3" Slicer: A great example of the 3" XM. Perfect detent, allowing for easy flipping action or thumb stud deployment, smooth action, centered. Cones with a black/blue scale, an additonal OD green scale, and a pair of bronze washers if you want to swap them for the Teflon ones. Box and peanuts included as well.
Prices on everything are as follows:
Delica Purple: $OLD
Delica ZDP: $OLD
Delica Wharncliffe/Hap40: $OLD
Chaparral: $OLD
Sage 2: $130
Southard: $150
Manix 2 LW: $OLD
0450: $OLD
0562CF: $OLD
0609: $OLD
0801TI: $155
940: $OLD
51 Morpho: $OLD
Steel Will Package: $75
Giant Mouse GM1: $OLD
Giant Mouse GM2: $OLD
Hinderer XM-18 3" Slicer: $315
I will ignore lowballers and am not interested in any trades right now.
Price is NET to me via paypal only, and include shipping in CONUS. If you want to use the Goods and Service option, add 3.5%. Again...NO TRADES, funds need to be recouped, you know how it is.
First I'll take it followed by and email or PM gets it. You can email me at halden.doerge at gmail. Check my feedback and buy with confidence. I stand behind all my knives and, where applicable, sharpening work. If you want additional pics, I am happy to provide them, just email or PM me.
Thanks in advance, BF!
Spyderco:
All of these come with boxes and paperwork.
Delica Purple: Carried a couple of times, shows little to no wear. Factory edge is still razor sharp.
Delica ZDP: Carried a couple of times, shows little to no wear. Factory edge is still razor sharp.
Delica Wharncliffe/Hap40: NIB, never used, never carried. Only taken out for pictures. Razor sharp factory edge.
Chaparral: Carried a couple of times, shows little wear. Factory edge is still razor sharp, but has been stropped. Note on this one that the wire clip is black rather than silver. The reason for this is that the original clip was all janky and I had Spyderco send me a new one. For some reason they sent the blacked out version, and I just went with it. That will be the clip that comes on it.
Sage 2: Carried and used but not abused at all. Super smooth action, solid lockup. Sharpened on the Wicked Edge at 15 dps to 1000 grit for a razor sharp finish. A solid example of the Sage 2.
Southard: Snappy flipping, super smooth action, no issues with the bearings, solid lockup, perfectly centered. Sharpened on the Wicked Edge at 15 dps to 600 grit, hair popping sharp. The lanyard tube has been removed, but is included. A solid example of this discontinued model.
Manix 2 LW: Free dropping action, centered blade, razor sharp 16 degree Wicked Edge at 400 grit (perfect for the S110V steel, super aggressive). Has been carried but shows little to no signs of wear.
Zero Tolerance:
All of these come with boxes and paperwork except the 0801TI which is missing the little pamphlet from ZT. It has the box, though.
0450: Carried a few times, comes with a Hinderer clip installed, as pictured. Also includes the stock clip and screws. Super snappy, smooth, free dropping action. Perfect centering and lockup. Sharpened at 19 degrees on the Wicked Edge to a high polished finish. Hair popping sharp. Great example of the 0450.
0562CF: Centered, snappy, smooth, rock solid lockup. Factory edge that has been stropped to keep it hair shaving sharp. Carried a few times but signs of wear are hard to detect. CTS 204P steel on this model.
0609: Perfect centering, snappy, super smooth, solid lockup. This one has been carried a fair bit so there are some slight signs of wear on the bronze ano and the lettering on the clip has faded off (looks better that way, IMO). Sharpened at 17 degrees on the Wicked Edge to a high polished finish. Hair popping sharp.
0801TI: Perfect centering, snappy, extremely free-dropping smooth, solid lockup. Sharpened at 17 degrees on the Wicked Edge to a high polished finish. Hair popping sharp. This one includes an excellent titanium deep carry clip from MXG Gear, as shown in the pics. Original pocket clip is included as well.
Benchmade:
940: The best example of the standard 940 I've had to date. Sharpened at 16 degrees on the Wicked Edge to a high polished finish. Hair popping sharp. Centering is almost perfect, action is buttery smooth with no play. The blade on this one is the best ground 940 I've ever had. Very nice and thin behind the edge and even. This one does not come with the original box, but does come with a Benchmade box, the original emerson-style clip, and an addtional aftermarket deep-carry titanium clip and screws. Currently has a Benchmade split-arrow clip installed, which I think is the best looking on this model.
51 Morpho Balisong: Selling this one for a friend, and I'm pretty unfamiliar with balisongs. There is some wear on the pocket clip, but other than that it doesn't show much wear. Has its original edge which is still sharp. Action is super free. No issues that I can see on this one. Comes in a Benchmade box, but it is not original, just fyi.
Giant Mouse:
Both of these come with original boxes and all paperwork.
Giant Mouse GM1: The original Giant Mouse knife, which is getting harder to find these days. This example has solid lockup, good flipping action, and smooth action. Flips well with flipper, thumb hole, or spydie flick deployment. Blade is centered and there are no signs of wear that I can detect. This one has been sharpened at 16 degrees on the Wicked Edge to a razor sharp, high polished finish.
Giant Mouse GM2: The second Giant Mouse knife, with it's fantastic bowie blade. This example has solid lockup, good flipping action, and smooth action. Flips well with flipper, thumb hole, or spydie flick deployment. Blade is centered. Some wear on the pocked clip ano from carry. This one has been sharpened at 15 degrees on the Wicked Edge to a razor sharp, high polished finish.
Steel Will Budget Package:
All of these come with boxes and paperwork.
Selling all these together and won't split them up, please do not ask. Comes with the Steel Will Modus, 3" Cutjack, and 3.25" Intrigue. All of them have been carried maybe once. All are well centered and flip superbly. The Intrigue was sharpened at 18 degrees per side on the Wicked Edge to a hair popping 1000 grit finish since the factory edge was kinda dull. The other two have sharp factory edges.
Hinderer:
Hinderer XM-18 3" Slicer: A great example of the 3" XM. Perfect detent, allowing for easy flipping action or thumb stud deployment, smooth action, centered. Cones with a black/blue scale, an additonal OD green scale, and a pair of bronze washers if you want to swap them for the Teflon ones. Box and peanuts included as well.
Prices on everything are as follows:
Delica Purple: $OLD
Delica ZDP: $OLD
Delica Wharncliffe/Hap40: $OLD
Chaparral: $OLD
Sage 2: $130
Southard: $150
Manix 2 LW: $OLD
0450: $OLD
0562CF: $OLD
0609: $OLD
0801TI: $155
940: $OLD
51 Morpho: $OLD
Steel Will Package: $75
Giant Mouse GM1: $OLD
Giant Mouse GM2: $OLD
Hinderer XM-18 3" Slicer: $315
I will ignore lowballers and am not interested in any trades right now.
Price is NET to me via paypal only, and include shipping in CONUS. If you want to use the Goods and Service option, add 3.5%. Again...NO TRADES, funds need to be recouped, you know how it is.
First I'll take it followed by and email or PM gets it. You can email me at halden.doerge at gmail. Check my feedback and buy with confidence. I stand behind all my knives and, where applicable, sharpening work. If you want additional pics, I am happy to provide them, just email or PM me.
Thanks in advance, BF!
Last edited:
