- Joined
- May 30, 2013
- Messages
- 321
Picked this up recently on the forum thinking I would make it my EDC. I like it a lot, but I've decided to put that on hold and invest the money elsewhere. I got it NIB, carried it for less than a week, and used it to open a couple of packages. No marks anywhere, sharp factory edge. It's a beautiful piece. This is the blue fallout finish with what appears to me to be the custom clip and hardware, though I'm not an expert on these knives. Asking $old NET shipped.
Kwaiback Pictures: http://imgur.com/a/GGpcv
Next up is a ZT 0566. This was my EDC for a while, but I've since moved on. I got it off the exchange as a user and put it right to work. Still locks up solid and flips well. Centering is perfect. I took the torsion bar out because I preferred the action that way, but I don't know what I did with it. I also sanded and acid stonewashed the clip myself. If you want to return it to stock, ZT will send a torsion bar and clip right to you. No marks on the blade or frame, but the G10 shows some wear. Sharpened on the Wicked Edge. Asking $old NET shipped.
0566 Pictures: http://imgur.com/a/5AqsC
Next up is a Spyderco Manix 2 in hollow ground 154CM with DLC coating. This was my first nicer knife ever and that's probably the reason it's been with me so long although I haven't carried it in a long time. This was m\y EDC for a while. The clip shows some wear on the coating, and the DLC shows some normal rubbing and there are a couple of scratches on one side near the tip that I showed in the pictures. They're much more subtle in person. Lockup is still solid, but at one point I accidentally broke the stem of the CBBL housing. It still functions just the same, but for full disclosure purposes I'm putting it out there. Sharpened on the Wicked Edge. Asking $50 NET shipped.
Manix 2 Pictures: http://imgur.com/a/T0IJD
Finally, a Kershaw Rake. This was also my EDC for a little while. I played around with some modding on this one back in the day. It has a ZT clip instead of the Kershaw one it came with stock. I also acid stonewashed the blade to really accentuate the composite blade. Has been resharpened since then by Kershaw and I haven't used it since. Tiny bit of lock rock on this one from use. Overall still a lot of life left in this blade. Asking $old NET shipped.
Rake Pictures: http://imgur.com/a/hioNE
All prices are NET to me, I'll cover USPS Priority 2 Day shipping with insurance where needed, and you cover the 3% for PayPal fees. I reserve the right to sell to who I want. Post I'll take it here and then shoot me a PM or email at chrispy513 (at) gmail (dot) com. I'll use the time stamp on here unless there's some other problem.
Thanks for looking!
Kwaiback Pictures: http://imgur.com/a/GGpcv
Next up is a ZT 0566. This was my EDC for a while, but I've since moved on. I got it off the exchange as a user and put it right to work. Still locks up solid and flips well. Centering is perfect. I took the torsion bar out because I preferred the action that way, but I don't know what I did with it. I also sanded and acid stonewashed the clip myself. If you want to return it to stock, ZT will send a torsion bar and clip right to you. No marks on the blade or frame, but the G10 shows some wear. Sharpened on the Wicked Edge. Asking $old NET shipped.
0566 Pictures: http://imgur.com/a/5AqsC
Next up is a Spyderco Manix 2 in hollow ground 154CM with DLC coating. This was my first nicer knife ever and that's probably the reason it's been with me so long although I haven't carried it in a long time. This was m\y EDC for a while. The clip shows some wear on the coating, and the DLC shows some normal rubbing and there are a couple of scratches on one side near the tip that I showed in the pictures. They're much more subtle in person. Lockup is still solid, but at one point I accidentally broke the stem of the CBBL housing. It still functions just the same, but for full disclosure purposes I'm putting it out there. Sharpened on the Wicked Edge. Asking $50 NET shipped.
Manix 2 Pictures: http://imgur.com/a/T0IJD
Finally, a Kershaw Rake. This was also my EDC for a little while. I played around with some modding on this one back in the day. It has a ZT clip instead of the Kershaw one it came with stock. I also acid stonewashed the blade to really accentuate the composite blade. Has been resharpened since then by Kershaw and I haven't used it since. Tiny bit of lock rock on this one from use. Overall still a lot of life left in this blade. Asking $old NET shipped.
Rake Pictures: http://imgur.com/a/hioNE
All prices are NET to me, I'll cover USPS Priority 2 Day shipping with insurance where needed, and you cover the 3% for PayPal fees. I reserve the right to sell to who I want. Post I'll take it here and then shoot me a PM or email at chrispy513 (at) gmail (dot) com. I'll use the time stamp on here unless there's some other problem.
Thanks for looking!
Last edited: