Too many fixed blades, and not enough time to use them all!
Prices include US shipping and PayPal fees (PayPal gift always appreciated, but not expected). First Ill take it gets it. Please post here, and then PM or email.
International shipping - International shipping available. Please PM for a quote. You are responsible for knowing if the knife is legal or not, and I cannot be held responsible if customs confiscates anything.
Reasonable offers will be considered.
Not really looking for any trades at this time.
Ontario RAT 7 - $70 - Sold to wunder556
Stripped, cut some cardboard, and put in the safe. Some discoloration near the tip of the blade.
Adam Kornalski (Jamall on BF) - Withdrawn - Original post from the maker: http://www.bladeforums.com/forums/s...-Blue-G10-ODC130-Elmax-4-5-mm-in-GCM-3-others
Used to cut some paracord and cardboard. Stropped once too. I purchased a couple knive from Adam, and his work is outstanding!
ELMAX ODC130 4,5 mm in Green Canvas Micarta and ABS 2 mm black sheath
HT by myself for maximum wear resistance 60 HRC
Handles Green Canvas Micarta , stainless steel screws sandblasted.
Stonewash finish.
Overall 263 mm, width 36 mm, cutting edge 130 mm - yes it is 5"
Weight 233 g.
Jeremy Garrison (Gimmejr on BF) - Withdrawn - Original post from the maker: http://www.bladeforums.com/forums/showthread.php/1332845-4-small-EDCs
Carried about a dozen times, scratches in the cerakote. Great light EDC fixed blade.
7.75" overall
3.75" blade
1" at its widest
.09" thick
full flat grind
kydex sheath
Corey Lueneburg (colu41 on BF) - $60 - Sold to Mike Clen - Original post from the maker: http://www.bladeforums.com/forums/s...-CPM154-Slim-G10-SOLD?p=15674163#post15674163
Carried a few times. Nice and light. Definitely needs to be sharpened. Scratches on the blade from the sheath.
.100 CPM154
3 3/4" Cutting Edge
8 1/4" OAL
FFG
SLIM Camo G10 Handles with black G10 spacer. Stainless Corbys & lanyard.
Comes with Desert Earth Carbon Fiber Holstex sheath/side carry.
Mark Martinez
None of these have been used, just handled and admired. Mark is a maker out of New York. I found his knives originally on eBay, was super impressed with the quality, and after conversing with him a bit, I had him custom make one for me. Excellent work at an outstanding price. In total I've purchased 9 knives from Mark, and all are excellent.
All come with Kydex sheaths, which are a little tight, but work and are nicely finished.
1) 5/32 inch 1095 with stabilized Curly Maple Wood scales and red liners. 5 inch blade - $60 > NOW $48 Sold to nannybear
Can see the epoxy between the liners and the blade. Slight gap in the scale near the top.
2) 1/4 inch 5160 with black canvas micarta scales and yellow liners. 4 3/4 inch blade - Withdrawn
3) 5/32 inch 1095 with Cocobolo Dymond Wood scales and blue liners. 3 15/16 inch blade - $70 > NOW $55 Sold to nannybear
Prices include US shipping and PayPal fees (PayPal gift always appreciated, but not expected). First Ill take it gets it. Please post here, and then PM or email.
International shipping - International shipping available. Please PM for a quote. You are responsible for knowing if the knife is legal or not, and I cannot be held responsible if customs confiscates anything.
Reasonable offers will be considered.
Not really looking for any trades at this time.
Ontario RAT 7 - $70 - Sold to wunder556
Stripped, cut some cardboard, and put in the safe. Some discoloration near the tip of the blade.
Adam Kornalski (Jamall on BF) - Withdrawn - Original post from the maker: http://www.bladeforums.com/forums/s...-Blue-G10-ODC130-Elmax-4-5-mm-in-GCM-3-others
Used to cut some paracord and cardboard. Stropped once too. I purchased a couple knive from Adam, and his work is outstanding!
ELMAX ODC130 4,5 mm in Green Canvas Micarta and ABS 2 mm black sheath
HT by myself for maximum wear resistance 60 HRC
Handles Green Canvas Micarta , stainless steel screws sandblasted.
Stonewash finish.
Overall 263 mm, width 36 mm, cutting edge 130 mm - yes it is 5"
Weight 233 g.
Jeremy Garrison (Gimmejr on BF) - Withdrawn - Original post from the maker: http://www.bladeforums.com/forums/showthread.php/1332845-4-small-EDCs
Carried about a dozen times, scratches in the cerakote. Great light EDC fixed blade.
7.75" overall
3.75" blade
1" at its widest
.09" thick
full flat grind
kydex sheath
Corey Lueneburg (colu41 on BF) - $60 - Sold to Mike Clen - Original post from the maker: http://www.bladeforums.com/forums/s...-CPM154-Slim-G10-SOLD?p=15674163#post15674163
Carried a few times. Nice and light. Definitely needs to be sharpened. Scratches on the blade from the sheath.
.100 CPM154
3 3/4" Cutting Edge
8 1/4" OAL
FFG
SLIM Camo G10 Handles with black G10 spacer. Stainless Corbys & lanyard.
Comes with Desert Earth Carbon Fiber Holstex sheath/side carry.
Mark Martinez
None of these have been used, just handled and admired. Mark is a maker out of New York. I found his knives originally on eBay, was super impressed with the quality, and after conversing with him a bit, I had him custom make one for me. Excellent work at an outstanding price. In total I've purchased 9 knives from Mark, and all are excellent.
All come with Kydex sheaths, which are a little tight, but work and are nicely finished.
1) 5/32 inch 1095 with stabilized Curly Maple Wood scales and red liners. 5 inch blade - $60 > NOW $48 Sold to nannybear
Can see the epoxy between the liners and the blade. Slight gap in the scale near the top.
2) 1/4 inch 5160 with black canvas micarta scales and yellow liners. 4 3/4 inch blade - Withdrawn
3) 5/32 inch 1095 with Cocobolo Dymond Wood scales and blue liners. 3 15/16 inch blade - $70 > NOW $55 Sold to nannybear
Last edited:
