I have the following for sale.....
4. Blackjack Cutlery / H.G. Long and Co. "OSS / OSE Sleeve Daggers"
Specifications
'Blade' Steel : 440-A
'Blade' Length : 3 1/2 in.
OAL Length : 7 in.
Cast Integral
These are all original H.G. Long and Co. OSS / OSE Sleeve Daggers (produced by BlackJack Cutlery in it's Effingham IL plant). These were made just like the original WW II era sleeve daggers.
These units are unfinished. They were purchased when Blackjack Cutlery closed it's Effingham IL facility. I have attached scans of the 1994 Blackjack Cutlery Catalog in which these were featured in. These sold new for $119.95 (in 1994!). I have several of these units available that have been consigned to me and as such, these are not able to be traded.
Condition Note: These are all unfinished products and as such there will be slight variations on each dagger. All are in approximately the same condition as the ones you see in the pics. They ARE NOT 100% NIB as they never were (as of yet), a person could well clean them up and polish them out and make them in a much better condition.
Price: $65.00
12. Protech / Brend #1 Automatic Knife
Specifications
Blade Steel : 154-CM Stainless Steel (59 RC)
Blade Length : 5 in.
Closed Length: 6 in.
OAL Length Opened : 10 5/8 in.
This discontinued auto from Protech features a 6061 T6 aircraft grade aluminum handle with a 154-CM blade, heat treated to 59 Rockwell. This Auto is all American Made and is lifetime guaranteed. The original MSRP for this knife was $400.00, the "street price" was $259.00 (when readily available). This knife has been discontinued for quite some time now.
Condition Note : The blade of this knife is in approximately 98 % condition. It has never been sharpened and appears to have never cut anything. I can't find a mark on the blade. The handle, however, does exhibit handling / carry marks. There are "snail trails" all throughout the anodized handles. As a result of this, I'd have to say it is used but not abused.
Price: $200.00 (SPF)
13. Beretta Avenger II Folder
Specifications
Blade Steel : Carbon Fiber Clad VG-10
Blade Length : 3 1/4 in.
Closed Length: 4 3/4 in.
OAL Length Opened : 8 in.
The Avenger II is a Warren Thomas design and features a tanto VG-10 blade with a carbon fiber laminate on one side, and a carbon fiber handle. Black coated stainless steel clip. Made in Japan. Includes original packaging. Mint condition.
Condition Note: 100 % NIB. Includes original box and packaging.
Price: $175.00
21. Parker - Imai 'Model # K-534' Balisong
Specifications
Blade Steel : 440-C Stainless Steel
Blade Length : 3 7/8 in.
OAL Length Opened: 8 9/16 in.
OAL Length Closed : 5 1/16 in.
This beautiful example of a 1980's Japanese Import Balisong features Brass Channel Skeletonized Handles.
Condition Note : Approximately 98% as received from the factory, which is incredible considering the age of the knife. It locks up as if it were new from the factory. There are a couple light hairline scratches on both sides of the blade. They are so small I was unable to photograph them. There is also a slight discoloration at the tip of the knife on the presentation side of the blade as seen in the pics. This knife comes with a box.
Price: $125.00
28. Benchmade Model 420SBK First Production Run 'Resistor'
Specifications
Blade Steel : 154CM Stainless Steel (58-60 RC)
Blade Length : 3 1/2 in.
OAL Length Opened : 8 1/4 in.
OAL Closed : 4 3/4 in.
This is a First Production Run of a Discontinued Benchmade Model 420SBK. This knife was designed by Mike Snody.
Condition Note : This knife is in around 98% condition having only a few faint scuff marks on the belt clip. The edge is original and unsharpened. Unfortunately this knife does NOT come with a box or pouch.
Price: $150.00
4. Blackjack Cutlery / H.G. Long and Co. "OSS / OSE Sleeve Daggers"
Specifications
'Blade' Steel : 440-A
'Blade' Length : 3 1/2 in.
OAL Length : 7 in.
Cast Integral
These are all original H.G. Long and Co. OSS / OSE Sleeve Daggers (produced by BlackJack Cutlery in it's Effingham IL plant). These were made just like the original WW II era sleeve daggers.
These units are unfinished. They were purchased when Blackjack Cutlery closed it's Effingham IL facility. I have attached scans of the 1994 Blackjack Cutlery Catalog in which these were featured in. These sold new for $119.95 (in 1994!). I have several of these units available that have been consigned to me and as such, these are not able to be traded.
Condition Note: These are all unfinished products and as such there will be slight variations on each dagger. All are in approximately the same condition as the ones you see in the pics. They ARE NOT 100% NIB as they never were (as of yet), a person could well clean them up and polish them out and make them in a much better condition.
Price: $65.00
12. Protech / Brend #1 Automatic Knife
Specifications
Blade Steel : 154-CM Stainless Steel (59 RC)
Blade Length : 5 in.
Closed Length: 6 in.
OAL Length Opened : 10 5/8 in.
This discontinued auto from Protech features a 6061 T6 aircraft grade aluminum handle with a 154-CM blade, heat treated to 59 Rockwell. This Auto is all American Made and is lifetime guaranteed. The original MSRP for this knife was $400.00, the "street price" was $259.00 (when readily available). This knife has been discontinued for quite some time now.
Condition Note : The blade of this knife is in approximately 98 % condition. It has never been sharpened and appears to have never cut anything. I can't find a mark on the blade. The handle, however, does exhibit handling / carry marks. There are "snail trails" all throughout the anodized handles. As a result of this, I'd have to say it is used but not abused.
Price: $200.00 (SPF)
13. Beretta Avenger II Folder
Specifications
Blade Steel : Carbon Fiber Clad VG-10
Blade Length : 3 1/4 in.
Closed Length: 4 3/4 in.
OAL Length Opened : 8 in.
The Avenger II is a Warren Thomas design and features a tanto VG-10 blade with a carbon fiber laminate on one side, and a carbon fiber handle. Black coated stainless steel clip. Made in Japan. Includes original packaging. Mint condition.
Condition Note: 100 % NIB. Includes original box and packaging.
Price: $175.00
21. Parker - Imai 'Model # K-534' Balisong
Specifications
Blade Steel : 440-C Stainless Steel
Blade Length : 3 7/8 in.
OAL Length Opened: 8 9/16 in.
OAL Length Closed : 5 1/16 in.
This beautiful example of a 1980's Japanese Import Balisong features Brass Channel Skeletonized Handles.
Condition Note : Approximately 98% as received from the factory, which is incredible considering the age of the knife. It locks up as if it were new from the factory. There are a couple light hairline scratches on both sides of the blade. They are so small I was unable to photograph them. There is also a slight discoloration at the tip of the knife on the presentation side of the blade as seen in the pics. This knife comes with a box.
Price: $125.00
28. Benchmade Model 420SBK First Production Run 'Resistor'
Specifications
Blade Steel : 154CM Stainless Steel (58-60 RC)
Blade Length : 3 1/2 in.
OAL Length Opened : 8 1/4 in.
OAL Closed : 4 3/4 in.
This is a First Production Run of a Discontinued Benchmade Model 420SBK. This knife was designed by Mike Snody.
Condition Note : This knife is in around 98% condition having only a few faint scuff marks on the belt clip. The edge is original and unsharpened. Unfortunately this knife does NOT come with a box or pouch.
Price: $150.00
Last edited:
