Comeuppance
Fixed Blade EDC Emisssary
- Joined
- Jan 12, 2013
- Messages
- 4,765
Looking for trade primarily, but cash works pretty well for such things too... So they're also for sale. Additionally, I'm getting a new(er... 2001 infinity i30) car soon, and I could really use some help on funding that as well. So, here's a ridiculously large list of knives.
The terms of sale:
For the sake of bandwidth and thread size, I have 1-2 pictures per knife and links to photobucket albums for each knife with more pictures, including centering and lockup shots.
TRADES:
Im primarily looking for trades! I picked up most of these off of the exchange, and Im selling them to get different knives, so I would rather skip the middleman if possible. Things Im interested in:
Specific knives:
- I really like framelocks, even better if they're Ti Framelocks with lockbar inserts.
Anyway, on to the knives:
ZT 0301 w/steel lockbar insert LNIB - $185 net / $191.48 goods
Full album HERE
Catch and release - I had somehow never handled one of these and had to check one out before they become scarce (especially the lockbar insert model !). Shoots open, locks up like a tank, and its dead centered when closed. The previous owner may have carried and/or used it, but I honestly cant detect any signs of it. Comes with box / papers / dessicant packet.
ZT 0700 LNIB - $90 net / $93.15 goods SOLD
Full album HERE
Amazing across the board - just not my style, apparently. Flips easily with no wrist action, locks up perfectly and early, and is centered. Comes with box and papers.
Leatherman MUT - $105 net / $108.68 goods
Full album HERE
Brand new, no box (was hang packaged) - Comes with everything, and it has never been carried or used.
Spyderco Vesuivius - $130 net / $134.55 goods TRADED
Full album HERE
Light signs of carry on the clip, but otherwise nearly flawless. Smooth, solid, and beautiful with a hawaiian blue shell inlay. This was the first generation of the Vesuivius, which was the precursor to the Centofante III. Additionally, this was the very first compression lock Spyderco produced. Blade steel is ATS-34. No box.
Spyderco Tuff BNIB CC#102 - $190 net / $196.65 goods
Full album HERE
Big. Beefy. Solid. Centered. Discontinued. New. Unused.
Also, a bit stiff to open. Comes with box and papers.
Buck Marksman - $60 net / $62.1 goods SOLD
Full album here
Brand new, no box (was hang packaged) - flips like a damned dream, locks up perfectly, BOS-treated 154CM blade on captive bearings. And a lifetime warranty. For sixty bucks.
Microtech DOC Red / Black S30v - $200 net / $207 goods SOLD
Full album HERE
Carried and used, but in great shape. Well centered, rock solid lockup, GREAT flipping action. I picked this up to give it another shot while I debate between this and an SMF, and Im still unsure. What I am sure about is that I dont really like black coated blades, so this is going. There is some wear on the hardware and handle, but almost no visible marks on the blade. The pocket clip has a little wiggle to it, but its certainly not loose nor does it compromise its function.
Zero Tolerance 0561 w/ lockbar insert, custom hardware, original hardware - $200 net / $207 goods
Full album HERE
This is the best Zero Tolerance I have ever held.
The pivot action is insane. I have never had a knife this smooth. It locks up like its one solid piece of metal. The custom hardware looks fking amazing in person, and the pictures come close to doing them justice. It flips like I wish all flippers flipped. I wont be too upset if nobody is willing to drop the cash on this one for outright sale, honestly. Im not even sure if I want to sell it, but Im certainly not currently carrying it or using it so I better list it before I get any more attached.
Cold Steel Warcraft Tanto w/ G-Clip - $115 net / $119.02 goods SOLD
Full album HERE
Used, but not abused. Hah! Like you can abuse 3V, FFS. Anyway, this has been used, very carefully honed along the factory bevel using a Wicked Edge, and then used a little after that. This thing is a destroyer of worlds. It will kill you and your family if you dont use it. I havent had use for it since moving to OK from CO, and its just been sitting on my mantle getting more and more impatient with apartment life. Im letting it out into the wild now, because it needs to be used.
Now, heres the thing: The knife and sheath will fit into a medium flatrate box, but the box wont. I can send everything BUT the box for the listed price, but WITH the box will both take longer and cost about $5 more.
The terms of sale:
- Please, no offers. That doesn't mean "I know you said no offers, but will you take xxx for yyy? - the prices are firm, and Im really looking for trades primarily anyway so Im not super inclined to take a loss on something I could trade up or across from. I apologize for how harsh that sounds, but I'm really pretty busy these days and don't have a lot of time to respond to PMs, and trades take a decent amount of back-and-forth as it is.
- I do not accept personal checks or money orders. Paypal only.
- ConUS only. Please refer to your local laws. 18 and older only.
- The first "I'll take it" followed by an email/PM gets it. If there isn't a post saying "I'll take it", the item is still available unless otherwise noted, so go ahead and send me an email/PM. Emails are far and away the most preferred method of communication.
For the sake of bandwidth and thread size, I have 1-2 pictures per knife and links to photobucket albums for each knife with more pictures, including centering and lockup shots.
TRADES:
Im primarily looking for trades! I picked up most of these off of the exchange, and Im selling them to get different knives, so I would rather skip the middleman if possible. Things Im interested in:
Specific knives:
- ADV Butcher mid-tech
- Boker Vox F3
- Grayman Dua
- Strider SMF
- Benchmade 760LFTi
- Spyderco Vallotton
- Cold Steel Rajah II (The new BD-1 version)
- Folders only.
- No serrations, no spring assist, no blades shorter than 3.25
- Like new, NIB, LNIB, or new no box
- I really like framelocks, even better if they're Ti Framelocks with lockbar inserts.
Anyway, on to the knives:
ZT 0301 w/steel lockbar insert LNIB - $185 net / $191.48 goods
Full album HERE
Catch and release - I had somehow never handled one of these and had to check one out before they become scarce (especially the lockbar insert model !). Shoots open, locks up like a tank, and its dead centered when closed. The previous owner may have carried and/or used it, but I honestly cant detect any signs of it. Comes with box / papers / dessicant packet.
ZT 0700 LNIB - $90 net / $93.15 goods SOLD
Full album HERE
Amazing across the board - just not my style, apparently. Flips easily with no wrist action, locks up perfectly and early, and is centered. Comes with box and papers.
Leatherman MUT - $105 net / $108.68 goods
Full album HERE
Brand new, no box (was hang packaged) - Comes with everything, and it has never been carried or used.
Spyderco Vesuivius - $130 net / $134.55 goods TRADED
Full album HERE
Light signs of carry on the clip, but otherwise nearly flawless. Smooth, solid, and beautiful with a hawaiian blue shell inlay. This was the first generation of the Vesuivius, which was the precursor to the Centofante III. Additionally, this was the very first compression lock Spyderco produced. Blade steel is ATS-34. No box.
Spyderco Tuff BNIB CC#102 - $190 net / $196.65 goods
Full album HERE
Big. Beefy. Solid. Centered. Discontinued. New. Unused.
Also, a bit stiff to open. Comes with box and papers.
Buck Marksman - $60 net / $62.1 goods SOLD
Full album here
Brand new, no box (was hang packaged) - flips like a damned dream, locks up perfectly, BOS-treated 154CM blade on captive bearings. And a lifetime warranty. For sixty bucks.
Microtech DOC Red / Black S30v - $200 net / $207 goods SOLD
Full album HERE
Carried and used, but in great shape. Well centered, rock solid lockup, GREAT flipping action. I picked this up to give it another shot while I debate between this and an SMF, and Im still unsure. What I am sure about is that I dont really like black coated blades, so this is going. There is some wear on the hardware and handle, but almost no visible marks on the blade. The pocket clip has a little wiggle to it, but its certainly not loose nor does it compromise its function.
Zero Tolerance 0561 w/ lockbar insert, custom hardware, original hardware - $200 net / $207 goods
Full album HERE
This is the best Zero Tolerance I have ever held.
The pivot action is insane. I have never had a knife this smooth. It locks up like its one solid piece of metal. The custom hardware looks fking amazing in person, and the pictures come close to doing them justice. It flips like I wish all flippers flipped. I wont be too upset if nobody is willing to drop the cash on this one for outright sale, honestly. Im not even sure if I want to sell it, but Im certainly not currently carrying it or using it so I better list it before I get any more attached.
Cold Steel Warcraft Tanto w/ G-Clip - $115 net / $119.02 goods SOLD
Full album HERE
Used, but not abused. Hah! Like you can abuse 3V, FFS. Anyway, this has been used, very carefully honed along the factory bevel using a Wicked Edge, and then used a little after that. This thing is a destroyer of worlds. It will kill you and your family if you dont use it. I havent had use for it since moving to OK from CO, and its just been sitting on my mantle getting more and more impatient with apartment life. Im letting it out into the wild now, because it needs to be used.
Now, heres the thing: The knife and sheath will fit into a medium flatrate box, but the box wont. I can send everything BUT the box for the listed price, but WITH the box will both take longer and cost about $5 more.
Last edited:
