1. Spyderco Civilian C12CFP Plain Edge NIB *QUEEN* LessThan 200 Made w /Plain Edge- $600 NET Via Paypal
Have you even seen a plain edge original Civilian with carbon fiber handles? You know they're rare when less than 200 plain edge were made. This knife is a queen of my collection and so hard to let go. This knife is in immaculate condition and is a must have for any real Spyderco collector; the card is still attached to the knife saying "Notice! This knife was not designed to be used as a utility knife", meaning it's a beast! The blade is ATS-55 stainless with a standard edge curved point slashing blade with thumb hole pull. CARBON FIBER HANDLES. Black coated steel pocket clip. Original zipper storage pouch with Spyderco logo and label. The Civilian was developed for a prestigious branch of US law enforcement. The patented reverse "S" blade shape evolved to fulfill the back-up needs of undercover agents with little or no training in self defense. With its paper thin tip, the Civilian is specifically designed for law enforcement personnel and not designed for general utility or everyday use. G-10 handle material makes the folder lightweight and a black pocket clip is situated for tip-down pocket carry. One of the most specialized CLIPITS in the Spyderco line-up, the Civilian is available in very limited quantities. Blade is hollow-ground.
Blade Thickness: 1/8" 3mm
Diam. Blade Hole: 15/32" 12mm
Edge Type: Plain Edge
Handle Material: Polished Carbon Fiber
Hardness: 60-61
Length Blade: 4 1/8" 105mm
Length Closed: 5 3/16" 132mm
Length Cutting Edge: 3 3/4" 95mm
Length Overall: 9 3/16" 233mm Feel free to ask any questions. Thanks for looking!
This is the one you need for your collection!
Untitled by Albert Berry,
Untitled by Albert Berry,
Untitled by Albert Berry,
Untitled by Albert Berry,
2..Spyderco C67GYS "R" Numbered & Very Rare Collectable Knife LNIB / $300 Net to me via Paypal
Up for sale a very rare "R" edition Spyderco. This knife has a "Spyderedged" blade and is a numbered piece. Only 600 made and they have become very sought after over the years. The knife is in excellent condition, never used or carried. Information from Spyderco below:
"Designed for full-sized cutting with the least possible amount of mass, it features, just over, 3-1/2 inches of VG-10 blade, available PlainEdged or SpyderEdged. The aluminum handle is cut out, lessening weight and revealing the folder's inner workings. It comes coated in titanium-colored Almite- a thin enamel-like layer that is tough and virtually weightless that resists wear and scratching. A three-screw pocket clip keeps the knife riding low in your pocket with convenient tip-up carry. For added safety and control, we've added a David Boye dent in the lockbar and slip resistant texturing to the spine and finger choil. Limited Quantities: When they're gone, they're gone!"
This vintage, Seki, Japan-made Spyderco "R" would make a fine addition to any collection.
Untitled by Albert Berry,
Untitled by Albert Berry,
Untitled by Albert Berry,
3.. Spyderco C57 DAlton Holder Toad *Highly Collectable* Fard to Find LNIB / $260 Net via Paypal
This is a knife that I purchased and didn't intend on letting go, as most in the Spyderco community will say if you have one hod onto it. However, with a baby on the way, I'm having to let go of the rare pieces I searched for for so long - the type of knife that is in immaculate condition even when is almost 20 years old. Original Boxed Spyderco D'Holder Toad knife with plain-edge blade. This is one of the most unique Spyderco collectables around and is hard to find. Designed by the famous custom knifemaker D'Holder. The thin hollow-grind on this blade needs to be seen to be appreciated. With an Almite handle it is very lightweight. Info from Spyderco below:
Model Name: DAlton Holder Toad
Model Reference: C57
Designer: DAlton Holder
Description: The Toad C57 is a very unique and small knife designed by master knifemaker DAlton Holder for Spyderco. The Toad is another of Spydercos rare collaboration models that is not easily found on the secondary market as they are hoarded by collectors.
Blade Length: 1 7/16″
Closed Length: 2 9/16″
Overall Length: 4″
Weight: 1.8oz
Blade Material: AUS-8
Blade Finish: Satin Finish
Blade Grind: High Hollow Grind
Handle Material: Almite Coated Aluminum
Locking Mechanism: Liner Lock
Untitled by Albert Berry,
Untitled by Albert Berry,
Untitled by Albert Berry,
Untitled by Albert Berry,
Thx guys!
Have you even seen a plain edge original Civilian with carbon fiber handles? You know they're rare when less than 200 plain edge were made. This knife is a queen of my collection and so hard to let go. This knife is in immaculate condition and is a must have for any real Spyderco collector; the card is still attached to the knife saying "Notice! This knife was not designed to be used as a utility knife", meaning it's a beast! The blade is ATS-55 stainless with a standard edge curved point slashing blade with thumb hole pull. CARBON FIBER HANDLES. Black coated steel pocket clip. Original zipper storage pouch with Spyderco logo and label. The Civilian was developed for a prestigious branch of US law enforcement. The patented reverse "S" blade shape evolved to fulfill the back-up needs of undercover agents with little or no training in self defense. With its paper thin tip, the Civilian is specifically designed for law enforcement personnel and not designed for general utility or everyday use. G-10 handle material makes the folder lightweight and a black pocket clip is situated for tip-down pocket carry. One of the most specialized CLIPITS in the Spyderco line-up, the Civilian is available in very limited quantities. Blade is hollow-ground.
Blade Thickness: 1/8" 3mm
Diam. Blade Hole: 15/32" 12mm
Edge Type: Plain Edge
Handle Material: Polished Carbon Fiber
Hardness: 60-61
Length Blade: 4 1/8" 105mm
Length Closed: 5 3/16" 132mm
Length Cutting Edge: 3 3/4" 95mm
Length Overall: 9 3/16" 233mm Feel free to ask any questions. Thanks for looking!
This is the one you need for your collection!
Untitled by Albert Berry,Untitled by Albert Berry, Untitled by Albert Berry, Untitled by Albert Berry, 2..Spyderco C67GYS "R" Numbered & Very Rare Collectable Knife LNIB / $300 Net to me via Paypal
Up for sale a very rare "R" edition Spyderco. This knife has a "Spyderedged" blade and is a numbered piece. Only 600 made and they have become very sought after over the years. The knife is in excellent condition, never used or carried. Information from Spyderco below:
"Designed for full-sized cutting with the least possible amount of mass, it features, just over, 3-1/2 inches of VG-10 blade, available PlainEdged or SpyderEdged. The aluminum handle is cut out, lessening weight and revealing the folder's inner workings. It comes coated in titanium-colored Almite- a thin enamel-like layer that is tough and virtually weightless that resists wear and scratching. A three-screw pocket clip keeps the knife riding low in your pocket with convenient tip-up carry. For added safety and control, we've added a David Boye dent in the lockbar and slip resistant texturing to the spine and finger choil. Limited Quantities: When they're gone, they're gone!"
This vintage, Seki, Japan-made Spyderco "R" would make a fine addition to any collection.
Untitled by Albert Berry, Untitled by Albert Berry, Untitled by Albert Berry, 3.. Spyderco C57 DAlton Holder Toad *Highly Collectable* Fard to Find LNIB / $260 Net via Paypal
This is a knife that I purchased and didn't intend on letting go, as most in the Spyderco community will say if you have one hod onto it. However, with a baby on the way, I'm having to let go of the rare pieces I searched for for so long - the type of knife that is in immaculate condition even when is almost 20 years old. Original Boxed Spyderco D'Holder Toad knife with plain-edge blade. This is one of the most unique Spyderco collectables around and is hard to find. Designed by the famous custom knifemaker D'Holder. The thin hollow-grind on this blade needs to be seen to be appreciated. With an Almite handle it is very lightweight. Info from Spyderco below:
Model Name: DAlton Holder Toad
Model Reference: C57
Designer: DAlton Holder
Description: The Toad C57 is a very unique and small knife designed by master knifemaker DAlton Holder for Spyderco. The Toad is another of Spydercos rare collaboration models that is not easily found on the secondary market as they are hoarded by collectors.
Blade Length: 1 7/16″
Closed Length: 2 9/16″
Overall Length: 4″
Weight: 1.8oz
Blade Material: AUS-8
Blade Finish: Satin Finish
Blade Grind: High Hollow Grind
Handle Material: Almite Coated Aluminum
Locking Mechanism: Liner Lock
Untitled by Albert Berry,Untitled by Albert Berry, Untitled by Albert Berry, Untitled by Albert Berry, Thx guys!