I have for trade:
RAT-3: One scratch in coating, the edge was evened out after an uneven factory grind and is now extremely sharp. Comes with OD sheath. Scales match handle very well. This about as good as small fixed blades get for me, so I'm not 100% sure I want to trade this, but may if the right offer is made.
RAT-5: User, the serrations and pommel were rounded a bit by the previous owner. The edge was a bit used, so I put a polished convex edge on it (it can be maintained on regular flat stones), Also extremely sharp! The pocket has been removed from the sheath (also by previous owner). Scales match handle very well.
Spyderco Paramilitary CPM-D2 Sprint Run: In used condition. The edge has been reduced in angle and a few light scratches were put on the blade in the process. This is now an excellent slicer. Handle is in great shape and lockup is at about 25%. The blade is slightly off-center, but not bad at all by my picky standards (no where near touching a liner or affecting use, just a slight cosmetic thing I like to disclose).
Victorinox Single Blade: I never saw one of these before, so I picked it up when I spoted it. It is brand new. I'd like to trade this for a large carbon steel (or D2) Sod Buster of some sort.
Buck 301 Stockman: USA made and has been carried and used. I cleaned up the bolsters and blades, but it still needs a good sharpening. Springs are all strong. This knife is not new and has lots of character, but has a lot of miles left on it.
I am looking for PE/Satin blades only please.
From:
Benchmade
Spyderco
Al Mar
ZT
Etc.
RAT-3: One scratch in coating, the edge was evened out after an uneven factory grind and is now extremely sharp. Comes with OD sheath. Scales match handle very well. This about as good as small fixed blades get for me, so I'm not 100% sure I want to trade this, but may if the right offer is made.
RAT-5: User, the serrations and pommel were rounded a bit by the previous owner. The edge was a bit used, so I put a polished convex edge on it (it can be maintained on regular flat stones), Also extremely sharp! The pocket has been removed from the sheath (also by previous owner). Scales match handle very well.
Spyderco Paramilitary CPM-D2 Sprint Run: In used condition. The edge has been reduced in angle and a few light scratches were put on the blade in the process. This is now an excellent slicer. Handle is in great shape and lockup is at about 25%. The blade is slightly off-center, but not bad at all by my picky standards (no where near touching a liner or affecting use, just a slight cosmetic thing I like to disclose).
Victorinox Single Blade: I never saw one of these before, so I picked it up when I spoted it. It is brand new. I'd like to trade this for a large carbon steel (or D2) Sod Buster of some sort.
Buck 301 Stockman: USA made and has been carried and used. I cleaned up the bolsters and blades, but it still needs a good sharpening. Springs are all strong. This knife is not new and has lots of character, but has a lot of miles left on it.
I am looking for PE/Satin blades only please.
From:
Benchmade
Spyderco
Al Mar
ZT
Etc.
