I am looking to sell both my ZT0562CF and Gayle Bradley folder in order to purchase an XM18.
Album
http://imgur.com/a/xYKC9
ZT0562CF M390 Serial #1806
The ZT0562CF has been professionally reground and sharpened by Josh at Razor Edge Knives who does a phenomenal job.
The blade has a thinner slicer grind with the additional option of a 220 grit satin finish versus the standard 60 grit and currently has a 15dps mirror edge that is extremely sharp. Some of the other modifications are ceramic ball bearings installed in the blue cages and the MXG Gear bronze anodized titanium hardware. There are some very minor scratches on the blade, but are difficult to see unless in the right light. The action is amazing and the lock-up and centering are the best I have seen. I have the original bearings and hardware (screws, standoffs, 2 extra clips) which will be included in the sale. I will also include a ZT zipper pouch.
SOLD Asking $350 via PayPal, shipped USPS Priority. SOLD
Gayle Bradley
This Spyderco Gayle Bradley has been used but very well maintained. The knife has had a sharpening choil added as well as the non-locking liner modified to allow for easier disengagement of the lock. After the liner was modified it was also re-polished so it looks factory. The action, centering, and lock-up are great on this one as well. It has a 17.5dps mirror edge that is extremely sharp. There is a small bit of discoloration near the Spyder-Hole on the clip side, however, I have done my best to keep this one coated in Frog-Lube to prevent any corrosion. There is a small scratch on the blade under the Spyder-Hole on the clip side as well. The clip has some of it's coating removed but a new one is availible from Spyderco if wanted.
Asking $125 via PayPal, shipped USPS Priority.
Album
http://imgur.com/a/xYKC9
ZT0562CF M390 Serial #1806
The ZT0562CF has been professionally reground and sharpened by Josh at Razor Edge Knives who does a phenomenal job.
The blade has a thinner slicer grind with the additional option of a 220 grit satin finish versus the standard 60 grit and currently has a 15dps mirror edge that is extremely sharp. Some of the other modifications are ceramic ball bearings installed in the blue cages and the MXG Gear bronze anodized titanium hardware. There are some very minor scratches on the blade, but are difficult to see unless in the right light. The action is amazing and the lock-up and centering are the best I have seen. I have the original bearings and hardware (screws, standoffs, 2 extra clips) which will be included in the sale. I will also include a ZT zipper pouch.
SOLD Asking $350 via PayPal, shipped USPS Priority. SOLD
Gayle Bradley
This Spyderco Gayle Bradley has been used but very well maintained. The knife has had a sharpening choil added as well as the non-locking liner modified to allow for easier disengagement of the lock. After the liner was modified it was also re-polished so it looks factory. The action, centering, and lock-up are great on this one as well. It has a 17.5dps mirror edge that is extremely sharp. There is a small bit of discoloration near the Spyder-Hole on the clip side, however, I have done my best to keep this one coated in Frog-Lube to prevent any corrosion. There is a small scratch on the blade under the Spyder-Hole on the clip side as well. The clip has some of it's coating removed but a new one is availible from Spyderco if wanted.
Asking $125 via PayPal, shipped USPS Priority.
Last edited:
